OK, I saw a post about this same issue, but it didn't help me at all when the comments on that post were sarcastic. YES I am a noob but I really want omnisphere to work... Here is my issue, I have deleted Omnisphere completely off of my computer to start new everytime, (Obviously I've tried this many times)
and when i install it I first use the R2R PROPER D1 and then use dynamic for 2-8. each time I let the installer install it in its default place, which is /user/library/applicationsupport/Spectronics/STEAM . Then I update it using the "Data updater" from R2R folder. After that I open up HEX Wars keygen and I get the challenge code from Omnisphere (I am using Mainstage ALSO Logic Pro X) and I paste it in the keygen and click Generate. I get the Code and paste it to Omnisphere and I ALWAYS get this error

"Please completely remove this instance of omnisphere and reopen it again. If upon reopening Omnisphere the authorization screen comes up again, this means you did not enter the correct Response code...'
So I do as is told and it still says the same thing, I quit mainstage and load it again and i get the Challenge code page again.

The problem is I always get the same Challenge code and same Response code so I don't know what to do.

I have tried multiple times to fix this, looked on threads and never got any help to fix this problem.

I am running OSX 10.9.5 and am using Logic Pro X and Mainstage as my software to use Omnisphere.

 

I have the same issue, please HELP

 

did use patch the plugin frist ?
you could also try R2R's keygen not sure how to run exe on mac but there is a way
if it comes to the worse and use patch the plugins but they still dont work
send us your Challenge code in a pm and ill run them in the R2R keygen if use cant get them to work

 

In which folder do i have to put the files to crack the plugin?

 

just reading the post on az for mac and i think mac plugin is prepatched
have a read here as well you could have to remove these keys and try again,
Omnisphere1 regkey: /Users/*YOU*/Library/Preferences/net.spectrasonics.V4.plist
Omnisphere2 regkey: /Users/*YOU*/Library/Preferences/net.spectrasonics.V6.plist

https://audiosex.pro/threads/spectrasonics-shocking-support-for-omnisphere-2.18787/

And here's the info from copy on az

What to download for a proper full O2 install:
1: Spectrasonics.Omnisphere.2.DVDR.D1.PROPER-R2R
2: From D2 to D8 released by DYNAMiCS
3a(WiN): Spectrasonics.Omnisphere.v2.0.Patch.and.Keygen.Only-R2R
3b(MAC): Spectrasonics.Omnisphere.v2.0.3d.MacOSX.Incl.Patched.and.Keygen-HEXWARS

--------------------------

How to install and authorize:
1: Mount D1-PROPER-R2R, and D2-D8 DYNAMiCS,
start installation with "Step 1 - Installer", continue until finished, will take long time.
2: Install "Step 2 - Data Updater" from DYNAMiCS release.
3: Optionally install "Step 3 - For Trilian Users" and "Step 4 - For Moog Tribute Users"
4: Install R2R Patch.and.Keygen or HEXWARS.Patched.and.Keygen.
5: Start plug-in and copy challenge code, input to keygen, generate a response and paste it into Omnisphere2 auth window.
6: Relaunch plug and enjoy !

 

Last edited: Sep 14, 2015

Library > Audio > Plugins > Components
> VST

replace, password, you're good..

 

THANKS :3

 

Okay, so I did this and again I got the same error. I have no clue what I am doing wrong... I deleted everything that had to do with spectronics and omnisphere and also deleted and RE-downloaded the R2R Proper D1 and all the Dynamics D2-8 and tried again. Still nothing. I get the same Challenge code from omnisphere and have no success in activating it to use it. So as of right now I am stuck.

 

have you tried disconnecting from internet when activating?

 

And how do I do that? Use HexWars? or the R2R patch/Keygen?

 

you should be using hexwars v2.0.3d of Omnisphere plugins. get that version, then copy - paste + replace omnisphere plugins in your plugins folders, with the k'd versions from HW. then authorize with the hexwars keygen included. it doesn't matter how big your STEAM folder is, if it's not full, you'll just be missing certain patches. should be 60.x GB, though. easy. enjoy.

 

Tried them all, in Logic its working....nut today I updated the Data to 2.0f and now Protools isn't working anymore...
I replaced the plugins by the HexWare ones so loving works protools does not accept the response....Help!?

 

I have a similar problem ATM.
Just tried to open omni2 and trillian both are not authorised. (the worked great for a few months)
I had no challenge code so could not use the keygen there was only a response code.
Have tried to replace the plugs and deleted the .plist (both locations) but did not solve the issues.

So ATM i am reinstalling again, this time i save my challenge code as text.
Try to search for a fix but did not find any there must be more users with this problem i think? (hope not)
It would make my life easier if i knew what is causing this issue, because this is the 2nd time it happens.

Guru's any comment on this?

 

This is strange, really.... The same plug in worked for months in protools.
I'm sure I did something wrong.
There must be something when in updated the software to 2.1. And wanted to downgrade back to 2.0.3d which worked fine....

 

Ok i tried to reinstall trillian, same problem no challenge code only response code.
Now i deleted every sinlge spectrasonics file and trying again.

First install omni 1 hope that works, if so i continue to install trillian.
Fingers crossed...

2 Kaylashbaboo; i have the same it worked great for months and i had it also updated
don't know what the problem is. The pc is also not connected to the internet.

 

Last edited: Oct 29, 2015

Hey Insaner: It works, I used the pre-patched plug-ins. I had a backup on another drive, and used the fresh pre-patched plugins which works great now....

 

I did the same and i did used the pre patched provided by HEX ofcorse

 

I had a backup of the R2R Zip with the pre key+patched plugins. unzipped it and used those again. and it worked...
Are you on Protools? Mac?

I did the Data update 2.1.0f and that seems to work fine.


#remove all.net.spectrasonics.plist, I think its v6
#remove all the plugins
i also removes the steam aliases, cubase my steam files are on an external hd.

replace all the plugins for each program you work in, and go..

this is how i did it...

 

This is the mac section so i am on mac of course.
Thanks for the help.

My problem is solved, i must say i was a little bit stupid BIG time :O.
My NIC was disabled in the bios, but remain visable (active) in the OS.
Waisted alot of time hehehe.

Thus if u do not see a response code u know the drill

 

Last edited: Nov 2, 2015