Akai S3000XL vs S3200XL

Discussion in 'Soundgear' started by Roject, Aug 16, 2019.

?

Which one I should buy?

  1. Akai S3000XL €200

    5 vote(s)
    71.4%
  2. Akai S3200XL €500

    2 vote(s)
    28.6%
  1. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    Is Akai S3000 has second filter fabric mounted?
     
  2. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
    no
     
  3. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    It is a pity that is not in S3000.
    Awghh
    I need high pass filter and band pass ;_;
     
  4. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    Only S3200XL Has fabric built-in second filter (Band Pass, High Pass)?
    Is some disinformation on the internet and I'm not shure ;)
     
  5. Slavestate

    Slavestate Platinum Record

    Joined:
    Jul 28, 2019
    Messages:
    352
    Likes Received:
    166
    All of the information is pretty clear out there on several websites, youre just not reading it right or something. The 3200XL has the extra filter board FACTORY installed. The 3000 and 3000XL do not. You can buy the IB304F filter board and install it in a 3000 and a 3000XL and have the extra filters.

    Its not that difficult.
     
  6. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
    Akai 3000 Series Samplers
    Akai's new 3000 Series sampler range - the MT guide
    by Simon Trask

    The brand new heavies previewed


    Just as the issue you now hold in your hands was about to go to press, Akai unveiled a new range of upmarket samplers intended to replace the venerable S1000 series. Not exactly an everyday event, I think you'll agree - and certainly not one we could let pass by without mention in these pages. So here, without further ado, is MT's preview/overview of the 3000 series, PLUS (is this on the ball or what?) an exclusive opportunity for you to win one of the new samplers, worth £2999 in the shops! Can you afford not to read on? No way...


    THE NEW LINE-UP


    Akai are releasing not one, not two, not even three, but four sampling modules based around a new custom LSI chip developed in-house by the company. Two of the new models, the S2800 and S3000, should be available by the time you read this - watch out for full reviews in next month's MT. They will be followed later in the year by the CD3000 and the S3200.

    Although the underlying technology of the 3000 series may be new, in many respects - not least visual appearance - the new samplers emphasise continuity, familiarity and (importantly for the legions of S1000 owners) compatibility with Akai's previous samplers. Balancing the imperatives of market demand and technical innovation, the company have come up with instruments which, on first impressions at least, are evolutionary rather than revolutionary - instruments calculated to keep the company at the forefront of both sampler design and the all-important 'market share'.

    New features which help to distinguish all four modules from the S1000 generation include 32-voice polyphony, resonant filters (at last!), effects processing (echo, chorus, pitch-shift and delay), a solo legato performance mode, and a faster MIDI response time. The new modules have more in common than not, but at the same time there are significant differences which are determined by their different asking prices. For instance, as the least expensive of the four, the S2800 can only be upgraded to 16Mb of sample RAM (maximum on the others is 32Mb), can't be fitted with an internal hard disk, forgoes the XLR audio inputs of the other modules, and has two individual outputs compared to the others' eight.


    New features include:
    • 32-voice polyphony
    • resonant filter
    • Assignable Program Modulation
    • faster MIDI response time
    • built-in digital effects on all models (though only the S3200 has reverb)
    • Keygroup routing to effects
    • envelope templates
    • new pitchbend mode offering separate up/down ranges
    • larger disk directory
    • Legato Solo performance mode
    • balanced inputs and outputs
    • context-sensitive Help pages
    • cursor diamond replaces cursor dial
    Meanwhile, at the other end of the price spectrum, features unique to the S3200 (the S1100 of the new range) include a second, multimode filter with one-band EQ; a hi/lo EQ balance section; reverb processing; two-track hard disk recording which, unlike on the S1100, can be used in conjunction with the reverb; SCSI, AES/EBU and SMPTE boards all fitted as standard; 8Mb of sample RAM fitted as standard; and provision for an optional internally-fitted 105Mb hard drive or 128Mb (3.5") magneto-optical drive.

    The S3000 is effectively the standard machine of the range, compared to which the other modules offer either more or less features. In many ways the most intriguing of the new modules is the CD3000, which comes fitted with a CD-ROM drive but forgoes analogue audio inputs. The drive can handle both CD-ROM disks and standard CDs, making the CD3000 an attractive proposition for anyone who regularly makes use of sample CDs.

    Two features of note on the module are the direct digital audio signal path between drive and sample RAM, and the option of over-riding, by means of user-programmable Setup files, the parameter settings stored on CD-ROM disks.


    S2800

    [​IMG]

    Spec

    Sampling resolution: stereo 16-bit linear with 64 x oversampling
    Sampling rates: 44.1kHz, 22.05kHz
    Internal processing: 28-bit
    D/A conversion: 20-bit with 8 x oversampling (L/R); 18-bit with 8 x oversampling (individual outs; each one has its own DAC)
    Polyphony: 32 voices
    Default sample RAM: 2Mb
    Maximum sample RAM: 16Mb
    Maximum number of samples: 255
    Maximum number of programs: 254
    Filtering: Low-pass, -12dB/oct with resonance
    Envelope generators: 2
    LFOs: 2
    Effects: echo, chorus, pitch-shift and dela
    Standard audio inputs: 1/4" phono (balanced) x 2
    Standard audio outputs: 1/4" phono (unbalanced) x 2
    Assignable independent audio outputs: 1/4" phono jack (unbalanced) x 2
    Connections: stereo headphones jack x 1, footswitch jack x 1, MIDI (In, Out, Thru)
    Interface boards: SCSI and AES/EBU digital I/O, both optional
    Onboard storage: 3.5" DSHD/DSDD floppy drive
    Display: 40 characters x 8 lines (text), 240 x 640 dots (graphics); backlit
    Casing: 2U 19"
    Weight: 7.7kg



    CD3000

    [​IMG]

    Spec

    Sampling resolution: stereo 16-bit linear (internal digital signal path from CD-ROM unit)
    Sampling rates: 44.1kHz, 22.05kHz
    Internal processing: 28-bit
    D/A conversion: 20-bit with 8 x oversampling (L/R); 18-bit with 8 x oversampling (individual outs; each one has its own DAC)
    Polyphony: 32 voices
    Default sample RAM: 2Mb
    Maximum sample RAM: 32Mb
    Maximum number of samples: 255
    Maximum number of programs: 254
    Filtering: Low-pass, -12dB/oct with resonance
    Envelope generators: 2
    LFOs: 2
    Effects: echo, chorus, pitch-shift and delay
    Standard audio inputs: XLR (balanced) x 2, 1/4" phono jack (balanced) x 2
    Standard audio outputs: XLR (balanced) x 2 1/4" phono jack (unbalanced) x 2
    Assignable independent audio outputs: 1/4" phono jack (unbalanced) x 8
    Connections: stereo headphones jack x 1, footswitch jack x 1, MIDI (In, Out, Thru)
    Interface boards: SCSI, fitted as standard
    Onboard storage: 3.5" DSHD/DSDD floppy drive
    Display: 40 characters x 8 lines (text), 240 x 640 dots (graphics); backlit
    Casing: 3U 19"
    Weight: 9.7kg



    S3000

    [​IMG]

    Spec

    Sampling Resolution: stereo 16-bit linear with 64 x oversampling
    Sample rates: 44.1kHz, 22.05kHz
    Internal processing: 28-bit
    D/A conversion: 20-bit with 8 x oversampling (L/R); 18-bit with 8 x oversampling (individual outs; each has its own DAC)
    Polyphony: 32 voices
    Internal processing: 28-bit
    D/A conversion: 20-bit with 8 x oversampling (L/R); 18-bit with 8 x oversampling (individual outs; each one has its own DAC)
    Default sample RAM: 2Mb
    Maximum sample RAM: 32Mb
    Maximum number of samples: 255
    Maximum number of programs: 254
    Filtering: low-pass, -12dB/oct with resonance
    Envelope generators: 2
    LFOs: 2
    Effects: echo, chorus, pitch-shift, delay
    Standard audio inputs: XLR (balanced) x 2, 1/4" phono jack (balanced) x 2
    Standard audio outputs: XLR (balanced) x 2, 1/4" phono jack (unbalanced) x 2
    Assignable independent audio outputs: 1/4" phono jack (unbalanced) x 8 Connections: stereo headphones x 1, footswitch x 1, MIDI (In, Out, Thru)
    Interface boards: SCSI, AES/EBU digital I/O and SMPTE reader/generator, all optional
    Onboard storage: 3.5" DSHD/DSHD floppy drive, optional 105Mb hard drive
    Display: 40 characters x 8 lines (text), 240 x 640 dots (graphics); backlit
    Casing: 3U 19"
    Weight: 9.7kg



    S3200

    [​IMG]

    Spec

    Sampling resolution: stereo 16-bit linear with 64 x oversampling
    Sample rates: 44.1kHz, 22.05kHz
    Internal processing: 28-bit
    D/A conversion: 20-bit with 8 x oversampling (L/R); 18-bit with 8 x oversampling (individual outs; each one has its own DAC)
    Polyphony: 32 voices
    Default sample RAM: 8Mb
    Maximum sample RAM: 32Mb
    Maximum number of samples: 255
    Maximum number of programs: 254
    Filtering: low-pass, -12dB/oct with resonance; low-pass, band-pass and high-pass, -12dB/oct with resonance, one-band EQ; low/high EQ balance
    Envelope generators: 3
    LFOs: 2
    Effects: echo, chorus, pitchshift, delay, reverb
    Standard audio inputs: XLR (balanced) x 2, 1/4" phono jack (balanced) x 2
    Standard audio outputs: XLR (balanced) x 2, 1/4" phono jack (unbalanced) x 2
    Assignable independent audio outputs: 1/4" phono jack (unbalanced) x 8 Connections: stereo headphones jack x 1, footswitch jack x 1, MIDI (In, Out, Thru)
    Interface boards: SCSI, AES/EBU digital I/O and SMPTE reader/generator, fitted as standard
    Onboard storage: 3.5" DSHD/DSDD floppy drive, choice of (optional) 105Mb hard drive or 128Mb (3.5") magneto-optical drive
    Display: 40 characters x 8 lines (text), 240 x 640 dots (graphics); backlit
    Casing: 3U 19"



    Akai Sampler Range '93
    S01: £799
    S950: £1199
    S1000: £3299
    S1100 EX: £1799
    S1000 + S1100 EX: £3999
    S2800: £2199 (available now)
    CD3000: £2399 (due in June)
    S3000: £2999 (available now)
    S3200: £3999 (due in May)

    (All prices SRP inc VAT)

    The S1000 has been discontinued; Akai UK sold their last few in December. The S1100 will be replaced by the new top-of-the-range model, the S3200, and with it will go the S1100 EX. However, as the only mid-priced machine in the Akai sampler catalogue, the S950 will remain in production for the foreseeable future - the only one of the late-eighties generation of Akai samplers to do so.


    Akai support software
    3000 series Sampletools

    (for Atari ST/STE and Apple Macintosh)
    Polystar Librarian and Sample Editor £399
    Parastar Real-time Parameter and Sample Editor £199
    Wavestar Sample Editor £149


    S01 Sampletools
    (for Atari ST/STE and Apple Macintosh)
    Wavestar Sample Editor £1149


    S01
    (for Atari ST/STE only)
    Pro-ex Sample Editor £49

    (All prices SRP inc VAT)


    Akai 3000 Series add-ons
    EXM-3002 2Mb Memory Expansion Board £149
    EXM-3008 8Mb Memory Expansion Board £499
    IB-301S SCSI Interface Board (S2800/S3000) £99
    IB-302D AES/EBU Digital Interface Board £299 (S2800/S3000) £299
    IB-303T SMPTE Interface Board (S3000) £119
    HD-108 105Mb Hard Disk Unit (S3000/S3200) £tba
    SM0-P301 3.5" Magneto-Optical Disk Drive (S3200) £tba

    (All prices SRP inc VAT)

    Akai S2800 & S3000 Samplers
    by Ian Masterson

    Leaders of the new school?


    It's tough at the top, but in the sampling stakes, Akai have every intention of staying ahead of the pack...

    [​IMG]
    Loyalty is the most elusive of human emotions - and certainly one of the most difficult to instill in people. Down the ages, power-crazed despots have lopped off prominent parts of people's bodies in their efforts to encourage loyalty amongst their subjects. Politicians will happily sell their souls to the Devil to win the loyalty of the voting population, while cat owners, anxious to maintain the affection of their brooding pets, must bear the cost of a lifetime's Whiskers and milk.

    For Akai it has taken the production of a series of 3U rackmounting samplers and a commitment to continued R&D to win the loyalty of their customers. But win it they have - and now most wouldn't contemplate buying a sampler from any other manufacturer. Of course, when you already produce machines of the calibre of the S950, the S1000 and the S1100, you have something of a problem when it comes to designing new machines which will maintain the loyal customer base you've built up. Things aren't helped either, when you gain a reputation for reliability; what is the incentive for owners of fully functioning S1000s and S1100s to part-ex their machines for a new model? The words 'rod' and 'back' spring to mind here.

    But as anyone who read last month's preview will probably know, the incentives most definitely are there and with the release of their two new machines, the S2800 and the S3000, Akai appear poised ready to net a whole new generation of devoted users. In fact, the two machines currently nestling in my rack blow Akai's previous flagship models out of the water. And most of the competition with them...

    There are strong family resemblances between the S1000/S1100 and the new units, although the S2800, being physically 'challenged', lacks the pert, angled front panel to hold the buttons and opts instead for a flush S950-type look. The buttons themselves have been radically altered; gone is the familiar sea of white rectangles; in its place a variety of new designs. For example, the major function buttons (Select Prog, Edit Sample, Edit Prog and so on) actually now light up when pressed, rather than relying on an associated LED.

    I'm not too sure about the re-designed numeric keypad; I like something substantial in this department to withstand my jabbing fingers, and the new, thinner buttons are perhaps a little too small. But at least they don't rattle. The Cursor Knob from the old-style panels has disappeared too, to be replaced by a 'diamond' of four direction buttons - a la DD1000. They take some getting used to, but overall they represent a significant improvement.

    In general terms, it appears that Akai have been paying a great deal of attention to sorting out all the little niggles that came to light on the last generation of machines and have made the S2800/S3000 ergonomically and aesthetically even more appealing. Until you discover their first glaring (and unforgivable) error, that is.

    [​IMG] Question: where should the sample input jacks be on a rack-mounting sampler? Answer: on the front panel, where they are easily accessible for the wide variety of input sources from which samples may be drawn. I wouldn't mind but this was obviously realised on the S1000 and S1100; why on earth take such a retrogressive step on two new machines? Very puzzling.

    One other area of concern (though I'll admit this is a personal grievance of mine) is the fitting of SCSI ports only as optional extras. On samplers with the potential of the 2800 and 3000, the demand for floppy disks for day to day use becomes unrealistically high. In these circumstances, the provision for a hard disk is virtually essential and should, in my opinion, be included as standard. OK, it would put up the overall price of machines, but the volume costs would surely be lower. You'll almost certainly have to buy a hard disk at some stage and to have your machine adapted to make this possible seems crazy to me.

    A range of other, minor features have been added to the exterior of the unit which undeniably make it more user friendly. For example, the headphone output is now on the front panel - thank god! - and an on/off switch for the LCD has been built into the contrast knob, helping to save the little blue lives of displays everywhere. But enough of these trivialities - let's get some noise going...

    For the uninitiated, creating a new sample involves the selecting of an existing sample, renaming it and copying it - so that you can then record over the renamed sample to create a new one, leaving the original intact. Having told the unit how long you want to record for and at what bandwidth (20 or 10kHz), it's simply a matter of setting a suitable recording level using the appropriate front panel knob and pressing 'Arm'. When the unit hears the start of the sound, it begins recording, and stops when the allotted time elapses (that's the most common method anyway).

    Having obtained your initial sample, you can then go on to edit it - and it's at this stage the new units start revealing some of the tricks Akai have installed up their sleeves. Samples are displayed as waveforms on screen - which may seem a little disconcerting for the unfamiliar, but is actually a deceptively clever way of working. On the S2800/S3000, these waveforms are now plotted as complete bargraphs; the S1000's miserable scribble of a line marking just the top of the plotted points is now a thing of the past.

    Naturally, you can vary the Start and End points of samples, truncate them, loop them, crossfade sections, join samples together, timestretch them and resample them at a different bandwidth - all things S1000 users are pretty well accustomed to. These functions are performed through the 'Edit 1' and 'Edit 2' pages - it's 'Edit 3' that holds the real innovations. In this mode various functions have been added which are reminiscent of Akai's DD1000 direct-to-disk recorder/editing system. Indeed, the new S-Series samplers offer you features previously only associated with ludicrously expensive digital editing systems.

    [​IMG] The first batch of functions let you edit individual sections of a sample; for example, you could remove a cough from the middle of a vocal sample. The screen presents you with three options for doing this: Chop, which removes the area of sample you highlight between the 'start' and 'end' markers and closes the gap this creates; Cut, which removes the selected area but retains the resultant gap; and Extract, which lets you 'lift' the highlighted area out of the sample altogether and remove the remainder of the waveform. One obvious application lies in the editing of drum loops; now you can isolate a single snare sound from a sample, or remove the kick drum to create a second version of the loop. Think how easy that makes customising, and individualising loops taken from sample CDs.

    Another new feature is a facility which makes it possible to normalise or rescale the gain of a sample. This is something many S1000 users would have killed for. Basically, if you have under-recorded the original signal, pressing 'normalise' expands the entire waveform to fill the available headroom, bringing the volume of the sample up to the optimum operating level.

    As you might imagine, this can make a world of difference to flaccid bass and drum sounds, and is particularly useful when it comes to multisampling an instrument across a whole keyboard, serving to keep the volume of the sound uniform. Rescale is a more drastic affair, in which the user chooses a level in dB for the entire sample to be cut or boosted by. Executing this causes the loudest point in the waveform to increase/decrease by the set amount, with the rest of the sample increasing/decreasing proportionately. It's a rough way of tweaking the volume of the sample, but again, very effective - providing you don't drive the signal into clipping, which it's all too easy to do.

    Finally, Akai have added a 'fade' facility by which you can set up a digital fade-in or fade-out on a sample. Again, blindingly simple, this function will see a great deal of use when it comes to smoothing off the sharp start and end points of a string or pad sound.

    Admittedly, these inclusions might not seem particularly earth-shattering to the casual passer-by, but for those who spend many hours of their lives gazing into electric-blue LCD screens trying to manipulate samples in ways their machines will not allow, Akai have suddenly become A Very Special Company once more.

    But the carnival doesn't stop there, as the Edit Program mode goes on to reveal. It's on these pages that you take your samples, assign them to areas of the keyboard, set up MIDI and performance data and basically turn the unit into a multitimbral sound module. As you might imagine, you are presented with all the data necessary to do this - again, the system is S1000-derived - but rather than simply restricting these to key ranges, MIDI channel numbers, pan settings and so on, Akai play their trump card with the addition of a new filter section. Not only this, but filters which can be controlled in real time. Hold me back...

    [​IMG]
    A major new element in the design of the S2800 and S3000 takes the form of Assignable Program Modulation (APM), a feature which lets you route virtually any MIDI controller to almost any 'module' in the sampler - a module being the filter section, amp section, pitch, LFOs, envelope generators and so on. Those of you familiar with old synths will instantly realise what this means: you could, for example, route the modwheel of your keyboard to open a filter while you're playing a sound (to recreate the character of a bubbling analogue synth). You could use the second envelope to control the pitch, for more off-the-wall, effects and you could try controlling the LFO from your keyboard to add vibrato or 'rotary speaker' effects to organ sounds. You could also... no, sorry, I'm getting carried away...

    I've already mentioned the basics of program construction and getting your samples into 'performance' mode is extremely simple - so I'll not detail every single parameter which can be controlled using APM. Naturally, the filters are the feature most people will get worked up about, so let's go straight to these.

    The S2800 and S3000 are equipped with 12dB/octave low-pass resonant filters which make it possible to alter the tonal character of your sample (using variable cutoff, velocity and resonance) from within the machines themselves. Other options allow you to use the modwheel, pitchbend, LFO1, Envelope1 or an external controller to open or close the filter.

    Bearing in mind that you can shape the waveform of your sample using the twin envelope generators (the second of which is a multistage envelope), and then use LFO at various stages, what we're really talking about here is the 'front panel' of an analogue synth included within each of the new machines. And lo! - Akai have actually included a diagram of this 'panel' in the manual.

    To sum up, the new S-series samplers actually redefine the concept of getting creative with samples in a way not previously imagined on machines of this kind. I found I was able to bring incredible life to string parts (in real time), add an extra rasp to brass instruments, and much greater depth to bass.

    Which brings me to another area of improvement - dynamic range. It's generally recognised that, good as it was, the S1000 lacked something in terms of bottom-end, particularly when it came to dance or pop music sounds. This, to make a massive understatement, is no longer a problem. I don't know what Akai have done to extend the range of the S2800 and S3000, but both units are capable of producing unbelievable bass and clear, sparkling highs. The problem is, trying to describe how this (and the filters) have transformed the sound is all but impossible on the page - you just have to hear it. Once you do, it's going to tear apart your ideas of how any piece of digital sound generation equipment should perform. Add to that 32 voice polyphony, APM and the countless improvements that have been made to the operating system and editing facilities, and you have machines that will once again set the standard all over the world.

    It's hard not to admire Akai; the enormity of the task of improving machines like the S1000 and S1100 could well have been their undoing. That they have succeeded can only be due to the fact that they have been prepared to listen to what musicians had to say about samplers and what they would like to see included on the new machines. Myself, I'm preparing for severe withdrawal symptoms when the S2800 and S3000 leave my studio. My loyalty to Akai has started to take root and I'm not even an owner.


    Background
    The S2800 and S3000 are the first members of the new generation of Akai samplers (the CD3000 and S3200 will follow later this year) - the 3000 being the direct replacement for the S1000. So popular has been the S1000, that much of the operating structure is retained on the 2800 and 3000; most of the business of getting samples into the machine, editing them via waveform displays and sorting them into programs for playback will be instantly recognisable to S1000 users.


    Vive le difference
    In terms of basic system architecture, the S2800 and S3000 are virtually identical, offering much the same in the way of sample editing and controlling - their differences lie more in the physical domain. Obviously, the 2800 only occupies a 2U rack space where the 3000 occupies the more traditional 3U.

    But there are greater variants; the 2800 only has two individually assignable outputs compared to the 3000's three; it offers less in the way of memory expansion potential (a maximum 16Mb compared to the 3000's 32Mb) and no SMPTE interface option. Although this might not seem like much, it cuts heavily into the cost of manufacturing, making the 2800 a not insignificant £800 cheaper than its big brother, and thus within easier reach of the amateur/semi-pro.

    Other than that, you get the same 16-bit quality with 20-bit internal processing, the same 64x oversampling, the same advanced editing, the same 32-voice polyphony (phew!) and the same real pleasure using both units.


    The Spec
    Shared


    Sampling resolution: stereo 16-bit linear with 64x oversampling
    Sampling rates: 44.1kHz, 22.05kHz
    Internal processing: 28-bit D/A conversion: 20-bit with 8x oversampling (L/R); 18-bit with 8x oversampling (individual outs; each one has its own DAC)
    Polyphony: 32 voice
    Default sample RAM: 2Mb
    Maximum number of samples: 255
    Maximum number of programs: 254
    Filtering: Low-pass, -12db/oct with resonance
    Envelope generators: 2
    LFOs: 2
    Effects: echo, chorus, pitchshift and delay
    Assignable independent audio outputs: ¼" phono jack (unbalanced) x 2
    Connections: stereo headphones jack, footswitch jack, MIDI In, Out & Thru.
    Display: 40 characters x 8 lines (text), 240 x 640 dots (graphics); backlit

    S2800

    Maximum sample RAM: 16Mb
    Standard audio inputs: ¼" phono (balanced) x 2
    Standard audio outputs: ¼" phono (unbalanced) x 2
    Interface boards: SCSI and AES/EBU digital I/O, both optional
    Onboard storage: 3.5" DSHD/DSDD floppy drive
    Casing: 2U 19"
    Weight: 7.7kg

    S3000

    Sampling resolution: stereo 16-bit linear (internal digital signal path from CD-ROM unit)
    Maximum sample RAM: 32Mb
    Standard audio inputs: XLR (balanced) x 2, - ¼" phono (balanced) x 2
    Standard audio outputs: XLR (balanced) x 2, ¼" phono (unbalanced) x 2
    Interface boards: SCSI fitted as standard
    Onboard storage: 3.5" DSHD/DSDD floppy drive, optional 105Mb hard drive
    Casing: 3U 19"
    Weight: 9.7kg



    http://www.muzines.co.uk/articles/akai-s2800-s3000-samplers/2444
     
    Last edited: Aug 30, 2019
    • Like Like x 2
    • Useful Useful x 1
    • List
  7. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
  8. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
  9. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
  10. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
    The Pirate
    ...:mad::crazy:
    yep so much specs to kno..:hillbilly:
    seem s3000 had fx just on s3000 xl it was optional..what do i kno..:drunks:
     
  11. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    Now I'm know a lot more. Thanks. After reading specs I choose three. I'm interested about S3200 (Fabric) or S3200XL (Fabric) or S3000XL (With eb16 & ib304f)
     
    Last edited: Aug 30, 2019
  12. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    @Gyro Gearloose
    ..."seem s3000 had fx just on s3000 xl it was optional..what do i kno..:drunks:"

    S3000 has something more than S3000XL with optional eb16 and ib304f?
     
  13. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
    [​IMG]
     
  14. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    @Gyro Gearloose
    Sorry, so many text to read ;d
    I'm dumb and dumber and is 3 am
    :crazy::mad:
     
  15. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    "Akai MPC 2000 and 2000 XL EB16 Effects FX board.

    Also works with the S3000XL and the S2000 units. The multi-effects channels provide distortion, EQ, ring modulation, a choice of modulation effects that includes chorus, phasing, flanging, pitch shifting, and rotary speaker emulation, as well as echo/delay and reverb. The reverb-only channels add 2 additional reverbs for a total of 4 independent reverbs. All EB16 effects are extensively editable and custom multi-effects configurations can be stored in 50 effect presets. An additional 50 presets are reserved just for reverbs.

    Although the EB16 can add spectacular effects to single programs, its true power becomes evident when it is used in Multi Mode. Here it is configured as four processors, each with its own effects bus. Each Multi Mode Part can be routed, with its own independent send level, to one of the processors. In this way, an entire multitimbral composition, complete with mix and effects, can be executed entirely in the digital domain and routed through the digital outputs directly to DAT or to an Akai digital disk recorder."
     
  16. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    idk I'm dumb as f*ck.
    I go to sleep
    :mad:
     
  17. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
    no...
     
    • Like Like x 1
    • Agree Agree x 1
    • List
  18. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    4,237
    Likes Received:
    1,846
    Location:
    Germany
    s2000 is also a XL
    Since you need 2 filters i would onlycsearch for s3200
     
    • Like Like x 1
    • Agree Agree x 1
    • List
  19. Slavestate

    Slavestate Platinum Record

    Joined:
    Jul 28, 2019
    Messages:
    352
    Likes Received:
    166
    As far as the effects go... They all have effects in them, even the cheapest S2800 would've had them. They all have a basic chorus, delay, pitch-shifter mentioned. They are very limited though if you want to use more than one program on the sampler at a time though. I sold mine a long time ago so I cant remember exactly how it went but it works like a couple of my synths do. If you are just using it to play one patch, you get the effects dedicated to that patch. If you use it as a multi instrument, and set up like 4 different patches to play, then the effects work differently and you dont get to use them on every program. They usually only work on the first one or maybe two. The rest might just get some sort of global effect.

    Buying the optional effects board let you use more of them at once, and it gave you new effects algorithms too.
     
    • Like Like x 1
    • Interesting Interesting x 1
    • Useful Useful x 1
    • List
  20. Roject

    Roject Audiosexual

    Joined:
    Jan 2, 2019
    Messages:
    1,487
    Likes Received:
    650
    Location:
    Earth
    Akai S3200XL for €350 is a good deal?

    2019-11-21_174133.png
     
Loading...
Similar Threads - Akai S3000XL S3200XL Forum Date
VST's Like Akai S3000XL Samplers, Synthesizers Aug 15, 2019
dont buy from AKAI Instruments Feb 14, 2024
New Akai MPK Mini competitor - Synido TempoKey K25 Computer Hardware Jan 23, 2024
Akai S3200 Manual Soundgear Dec 16, 2023
How do you use all those old 90's Akai samples? Lounge Dec 5, 2023
Loading...