UVI Falcon and Reaper-HOW TO?

Discussion in 'Software' started by stardiver, Feb 2, 2026 at 6:14 PM.

  1. stardiver

    stardiver Newbie

    Joined:
    Today
    Messages:
    1
    Likes Received:
    0
    Hello everyone. Help, guys. I've been struggling with this for a few days now, and I'm not quite sure if I'm doing it right.
    Here's the problem.
    I want to separate Falcon instruments onto different tracks in Reaper so I can assign notes to them separately in the piano roll. You understand, so I don't have to load Falcon up on each track separately, wasting unnecessary PC resources.
    But I can't seem to get it done. I've tried everything—sends, selecting MIDI Out on each instrument—but it's all to no avail. There's no sound. The signal indicator on the track jumps, but no sound comes through. So, it's as if whatever I have on the track, written in the piano roll, isn't coming through in Falcon. Everything only works on the Main Out.
    I hope you understand my question.
    I need the piano roll data from each track in the reaper to be processed separately by Falcon and output as audio. This allows me to write separate parts for each instrument in Falcon.
     
  2.  
  3. Sweatypits

    Sweatypits Member

    Joined:
    Dec 26, 2024
    Messages:
    23
    Likes Received:
    10
    Sounds like you are wanting to do something like a Kontakt multi in Falcon. One instance of Falcon containing a number of different instruments. Each one has a different MIDI track feeding in and then sending their signals out to independent tracks for capture and processing. If so, this is how I would do that.

    1) Load/open Falcon on a track

    2) Load some instruments in the Parts (left) column
    *suggest you start with just two to keep the first try simple. Make them very different so you can clearly distinguish them in the test later.

    3) MIDI Routing
    With the Falcon instance (FX window) open, click the 'Edit' option in the top left menu. Scroll to the bottom and click "Build 16 Channels of MIDI Routing..." In this instance you only need the first 2 so select and delete the rest.

    4) Output Routing
    As above, via the same 'Edit' option, but now click "Build multichannel routing for output..." Again, delete all but the first 2 tracks.

    5) Route instruments in Falcon
    Each instance is routed to 'Main Out' by default. We can leave the first track as is. Left click where you see the words 'Main Out' on the 2nd instrument. A long list of outputs will appear. Select 'Out 2'

    6) Test
    Put some MIDI in each track. Maybe long whole notes in one, and an 8th or 16th note ostinato in the other. Hit play. You should hear both parts being played by the corresponding instrument, and see the signals routed separately to the two output tracks.

    If you do, you now have the means to build out bigger instances, with more instruments hosted in Falcon. However, unless you have a smokingly jacked system, you will likely hit processing limits fairly quickly

    If you are not hearing anything, check the routing of the MIDI tracks. In this instance the Send should be something like
    "Send to track 1 'Falcon'"
    Audio: None
    MIDI: All -> 1 (for the 1st MIDI track)
    MIDI: All -> 2 (for the 2nd MIDI track)

    Hopefully that make sense and is helpful.

    **I'm not a superstar at this stuff. Enough knowledge to be dangerous. If someone else knows a more efficient way to do this, hopefully they will chime in :wink:

    Addition... if you are familiar with manually adding and routing tracks you don't have to use those 'Edit' option links. The nice thing there is the routing for multiple tracks is done right with a single click.
     
    Last edited: Feb 2, 2026 at 7:57 PM
Loading...
Similar Threads - Falcon Reaper Forum Date
Issues with Falcon v26 and Crossover 25.1.1 Mac / Hackintosh Dec 6, 2025
Problems with uvi Falcon v26.0.2 (resolved) Software Dec 1, 2025
Falcon and UVI Workstation crash when indexing volume. Software Nov 30, 2025
UVI Falcon library errors Samplers, Synthesizers Nov 30, 2025
UVI Falcon v26 issues thread Software Nov 29, 2025
Loading...