Hello all audio freaks.. I'am new here so I wanna thank you all for the really nice posts. Greets from Brazil.
Well.. there is no such information over the manual and even on the Roland's website.. so it shoud be useful. (most commands also works on Juno-106) . ps: these are only the standards midi CC.. there are more tweekable parameters like delay feedback, delay high cut, hp, lp dump frequencies and many others that i found over my Novation Automap [I really have no idea in how to control those parameters outside Novation's Automap....someone??], although they all appear in Reaper's FX parameters List. Most of the main parameters like ADSR, Filters, Portamento, LFO settings are the same in JUNO-106 Cloud.

Jupiter-8 Cloud MIDI CC

03- Filter Cutoff
05- Portmento
09- Rezo
12- FX Depth
13- Delay Tone
15- LFO > Trig Env
16- VCO1 level
17- VCO2 level
22- VCO > Env Amount Mod
26- VCO > LFO Mod
27- LFO Delay Time
28- VCF > LFO
29- LFO rate
30- VCA > LFO Mod
35- LFO Waveform
41- Bend Range
46- VCO1 Wave Type
47- VCO1 Range
49- Bend Gain
50- Pulse Width
51- VCF Envelope 1 or 2
52- VCO2 to VCO1 Crossmod
53- VCF > Velocity Sens
54- VCA > Velocity Sens
56- VCO2 Fine Tuning
59- Keyboard to Env1 > Key Follow
60- Pulse Width Switch (LFO/E1+,E1,E2+,E2)
61- VCO2 Waveform
62- VCO2 Range
68- Bent to VCO
69- VCA Tone
70- FX Type
71- FX Tone
72- Delay Type
73- Reverb Type
74- Reverb Time
75- Bend to Filter Sens
79- HPF Cutoff
80- Modw to VCO
81- Env to VCF
82- Key to VCF
83- Env1 A
84- Env1 D
85- Env1 S
86- Env1 R
88- Keyboard to Env2 > Key Follow
89- Env2 A
90- Env2 D
91- Reverb Level
94- Delay Level
96- Env2 S
97- Env2 R
103-LFO&ENV Modulation assign > VCO1 or Both
104-LFO&ENV Modulation assign > VCO2 or Both
108-Lopass Filter Slope
109-Modw to Filter Sens
110-Env2 to VCA Level(shape)
111-VCO2 > Normal or Low Frequency (turns VCO2 in a LFO)
112-Sync VCO2 to VCO1
116-Legato ON/OFF
117-LFO > KEY TRIG
118-Sync Delay Time and Lfo RATE to host