Peavey ReValver Plugin there are The 3rd party user banks/presets/program modules..

To import banks and RIIIprogram are easy to load and straight forward,but the life of me and I've looked hard and long and tried everything,

How do we load users 3rd party Amp/File program module..I have place the the user Amp program module in Peavey Install directory but they dont show up when I load Peavey and check to load a preset Amps..Thers one I like to try is user 3rd party MB-Soldano amp..Some how you need to load the Amp and then re save it.. but tried everything to figure out to load the Amp File... Maybe I'm missing something here.. I have Win 7 64bit.

Thx for your help if you can.Rob

 

are these 3rd party user banks/presets/program created for the Peavey ReValver MKIII?
i think that for importing presets that were created\exported in a different Revalver edition, ex: Revalver HP or Revalver MKII, you cannot load them into ReValver MKIII edition.

 

@ mrrnr,

For that you can access some of these 'Amp/File program modules', you must first, place them inside the right folder :

In my case under 'Win7 Ultimate Edition' (x86-32bit) :

C:\Program Files\Peavey Electronics\ReValver Mk IIIdotV\moduleparams (<-- inside this 'moduleparams' folder.)

When done, you must of course load the right Amp to have access to the right 'Amp/File program modules'.


As an example, below you have some of these 'Program Modules' for the Amp Model 'Peavey JSX' :




First, load the right 'Amp Model', then click on 'L' ('Load', on the right side of each Amp), you'll then get the small window 'Load module parameters' with the diverse modules available (e.g. 'Clean pick', Cleanish ultra', 'Crunchy',... ).
Then if you pay attention at the left window, which is the location previously told where you have to put the 'Amp/File Program Modules' (for instance, from 'Third-Parties' as is your desire), you can check that the 3 Modules (circled in red) are also present in that 'moduleparams' folder as well :

- Clean pick.amp_peaveyJSX
- Cleanish ultra.amp_peaveyJSX
- Crunchy.amp_peaveyJSX
...

I written in BOLD the suffix of each of these 3 Modules for you to understand that it must to correspond to the chosen/loaded Amp, or you'll not get any 'Module' available when trying to 'Load module parameters' (right window) ! *yes*

 

Good ? maybe thats why those 3rd party user amp files are not showing up

 

Great illustration,I will give that a try...

 

Here is a 3rd party user preset the Soldano Amp i put in the peavey directory and im trying to load into peavey amp plugin and as you can see that the Soldano amp file is in the Peavey directory folder..

Studio 555 any tip on what Amp i need to load Soldano Amp

 

@ mrrnr,

*yes* Load and use the Amp Model : 'The MatchBox', which corresponds to the Amp N° 5, then that matches your 'MB Soldano.amp_05'.

It should do the trick !


By cons, it could be very nice from you to tell me where I can find (or where you have found/downloaded) some of your 'Extra Modules' like this 'MB Soldano', because as you can guess it, I don't have it (them) within my 'Factory Modules', and I'll be very happy (and excited ! ) to try some of them...

Thanks in advance...

 

S555 sent u PM

 

@ mrrnr,

Firstly, Thank You very much for your kind 'PM', as well as for this 'MB Soldano' Module and the others included too...

About your comment written in your 'PM' :

and

Here you have one... *yes*

Below, you'll find some snapshots that I done for you with the hope that they can be helpful to you to finally getting that 'MB Soldano' Module 'rocking' your DAWs !!!




First Step : Selecting (and loading) that 'The MatchBox' Amp Model within the 'Modules' -> 'Amps' Models...




When 'The Matchbox' Amp Model is properly loaded and available inside your Rack, simply use the 'L' ('Load' button on the right side of the Amp GUI), to open the 'Load module parameters' window, where you can see now that I have that 'MB Soldano' Module available (thanks to your 'PM' !) *yes*




I deliberately loaded 2 times that same 'The MatchBox' Amp Model for you to see that this 'MB Soldano' Module is effective. Simply check the upper 'MatchBox' that is in its initial state with all the Settings set to neutral values... and the bottom 'MatchBox' which is loaded with that 'MB Soldano' Module, and where you can clearly see that the Settings are set to different values, thus meaning that this 'MB Soldano' Module is working properly... *yes*


Hope it can help you... and that you can soon 'put the fire' in your Tracks with that 'MB Soldano' Module !!!

 

Silly me..I was looking for the Matchbox of the top of Peaveys drop down menus.Just got to get my away around
Peavey..Side Note. I recently put away my Line 6 Pod x3 live and POD Farm but always love the Modern Solo "Soldano"Patch in the Pod x3 live but now days going strictly Plugin Amp Sims.. Great Job S555 of your illustration and the Soldano is now showing,I'm glad that this turn out great for both of us.. Glad to share..

 

By cons, it could be very nice from you to tell me where I can find (or where you have found/downloaded) some of your 'Extra Modules' like this 'MB Soldano', because as you can guess it, I don't have it (them) within my 'Factory Modules', and I'll be very happy (and excited ! ) to try some of them...

I'd also be interested where do you guys can obtain these 3rd party modules..?

Thanks in advance!

 

dios I PM You...

 

Yeah where can we get those modules?
I am also interrested.
And b.t.w wonder how the NEW Revalver would sound?

 

Me too would like to try these new amps for MIII, any chance I can also get a PM?

 

@ Guitarmaniac64,

@ Threadkiller,

...as well as for other 'ReValver MKIII.V' users interested by getting some 'extra' Modules, here you have all the content of my 'moduleparams' Folder.

Most of them are these that come as 'Factory' Modules with 'ReValver MKIII.V' (about 80-85, if I well remember !), and the rest were downloaded from several specialized 'Peavey ReValver' Forums through Internet.
Maybe you already have most of them, or maybe not... and here come the interesting things !

The trick is to select the Full Content of my provided 'moduleparams' Folder and to copy it inside yours, but paying attention TO NOT OVERWRITE the identical 'Modules' already present within your 'moduleparams' Folder (identical 'name' and identical 'size'). *yes*


Here you have a snapshot depicting the exact Content of my 'moduleparams' Folder at this time (this that you can get via the provided 'Solidfiles' Download Link) :







I deliberately created (inside my 'moduleparams' Folder) another Folder containing all the 'Modules' for that 'Ultimate Kitty Tweak Pack', because it contains several Sub-Folders itself, and mainly to avoid confusions as their number is rather large... *yes*



Grab me via 'Solidfiles' ! *yes*

http://www.solidfiles.com/d/925a723ead/


P.S: The 'MB Soldano.amp_05' Module is included in that 'moduleparams' Folder...



Hope you'll enjoy some of these 'Modules' that perhaps you don't have yet...

 

Wow, Studio 555 is taken this to a whole new level.Just amazing with all the goodies he has posted and shared..

 

Id like to say thanks as well...

 

Thabnks studio555 for the modules

 

Thank you so much for sharing!