When I use Omnisphere, on either of the 2 layer mix file access pages, there is an Icon bottom right'ish that says "expression", does anybody know what it's all about please?

JC

 

for turning off your expression pedal.......

google found this:


You can use modulation to control a parameter via midi CC. See the modulation tutorial for modulation details. That gets saved in the patch. You can remap controllers to CC's on the system page.

Omnisphere responds to CC11 in the standard way to attenuate part levels. You can turn that off with the expression pedal button in the footer.


post #8 on this thread here.....

http://www.northernsounds.com/forum/showthread.php/63096-Any-Performance-tweaks-for-Omnisphere

--
sG

 

subGENRE about says it all

This is Everything on the subject direct from the manual.

The Expression Pedal Icon is an on/off toggle. It defaults to on (enabled). When this switch is enabled, the Expression pedal will always affect Expression (CC#11).

When this switch is disabled, the Expression pedal will still send CC#11 messages, but will not be applied to Expression. This allows the Expression pedal to be used exclusively for modulating other parameters using the Mod Matrix, or by MIDI-learning controls such as FX or Filter parameters, or Layer mix controls.



NOTE: When the Expression Icon is enabled, the Expression pedal can still be used to modulate or control other parameters, however those additions will act in combination with the normal Expression function.

 

Many thanks Guys - info appreciated.

JC

 

no problem