Keyscape not loading sound source!

Discussion in 'Software' started by SeriousSamsonOnTheBeat, Jul 25, 2017.

  1. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    I have been all over this site in lots of different forum conversations concerning both omnishpere and keyscape and have finally gotten all problems worked out except for one. If you are as determined as i am and either are looking for both Omnisphere 2 and Keyscape then you have found the right conversation. I have gotten my Omnisphere software to V2.3.1 64 bit, soundsource to V2.0.1c, and patches to V2.3.0c, and for keyscape sound source V1.0.2, patches V1.1d, creative patches V1.0e. If you have made it this far with both omnisphere and keyscape then like me you have it all sitting with this error message (Cannot Load Sound Source from directory "keyscape library" realease.zmap may be missing or corrupted try refreshing the sound source browser) TBH i don't know how to refresh the sound source browser i don't see a refresh button LoL so if anyone has found the answer and could lead me in the right direction or has the solution it would be humbly appreciated!!

     
  2.  
  3. Sylenth.Will.Fall

    Sylenth.Will.Fall Audiosexual

    Joined:
    Aug 21, 2015
    Messages:
    2,632
    Likes Received:
    1,821
    If you mean in omnisphere look at this photo.

    https://multitrackscom.zendesk.com/hc/en-us/article_attachments/202400544/image5.png

    Now see the play button at the bottom? it's the one directly to the left of it!
     
  4. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    Yup Did That thank you so much!! Still no dice !! release.zmap missing or corrupted error message. and still don't have a way to patch the keyscape dll
     
  5. TonyG

    TonyG Guest

    Open Omnisphere and under instruments ad satellites check for the versions and make sure every single one is as follows

    Omnisphere Software: 2.3.2h
    Omnisphere Soundsource: 2.0.1c
    Omnisphere Patches: 2.3.0c

    Keyscape Soundsources: 1.0.2
    Keyscape Patches: 1.1d
    Keyscape Creative Patches: 1.0e

    Trillian Soundsources: 1.0.1
    Trillian Patches: 1.4.6c
    Trillian VIP Patches: 1.4.6c
     
  6. TonyG

    TonyG Guest

    In order to patch it Omnisphere needs to be closed. Close it. Patch it. Reopen it.
     
    • Like Like x 2
    • Agree Agree x 1
    • List
  7. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
  8. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    I def don't have Omni software V 2.3.2 i have 2.3.1 and i also have the keyscape vst dll unpatched as well, so I need a link or torrent so i can get to 2.3.2. a response generator for keyscape is something i have not seen at all
     
  9. TonyG

    TonyG Guest

    Didnt I send you the updates including 2.3.2 h? It included the Key Generator as well. We are going in circles here. Let me know and I will re send every update to you right away
     
  10. Sylenth.Will.Fall

    Sylenth.Will.Fall Audiosexual

    Joined:
    Aug 21, 2015
    Messages:
    2,632
    Likes Received:
    1,821
    I believe so yes, and I just checked, it is still available on the sister site!
     
  11. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    I'm sorry I do appreciate your patience i truly do the link you sent didn't have the 2.3.2 software update for omnisphere 2 nor the key generator , but the sound source and patches were and i don't need those i'm all good there just need software update there my trillian patches and vip patches have a different letter then yours mine have a d instead of a c but that is the only difference is that an issue?
     
  12. TonyG

    TonyG Guest

    I just sent you the link for 2.3.2h by PM. I cannot post it here because it is against the rule. What else do you need. As to Trillian what version do you have? Not just the letter but the actual numbers too? You could have a "d" instead of a "c" and it could still be an older version. I think the numbers I sent you are the LATEST. BTW thefirst link I sent you does have the key Generator. Look for it. If you cannot find it it is because your antivirus has it quaranteened. Turnoff antivirus and reopen rar file. You will find it within"crack" folder.
     
    Last edited by a moderator: Jul 25, 2017
    • Like Like x 5
    • Useful Useful x 1
    • List
  13. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    I hope to goodness your not getting frustrated but there was no "crack" folder
     
  14. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    if you are sure it was in the link you sent can you resend via pm cause i swear i turned off antivirus altogether and did it again at the only thing in there was the software update for omni no response generator/keygen
     
  15. TonyG

    TonyG Guest

    Best Answer
    Check your gmail
     
    • Like Like x 2
    • Winner Winner x 1
    • List
  16. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    I am all updated now for my software so the only thing i need now is a keygen response generator for the keyscape dll and maybe i begin to help others and pay it forward cause this has been something i have put quite alot of energy and determination into
     
  17. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    Many sighs and headaches my friend ....A whooooole lot
     
  18. mono

    mono Audiosexual

    Joined:
    Jul 23, 2014
    Messages:
    1,062
    Likes Received:
    622
    Location:
    Floating Amongst the Stars
    @SeriousSamsonOnTheBeat
    The keyscape dll is prepatch so you just need to enter serial into the R2R Omnisphere keygen.
     
    • Like Like x 1
    • Agree Agree x 1
    • Useful Useful x 1
    • List
  19. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    Well I finally have my Omni version to 2.3.2 with all sound source and patches updated, as well as Keyscape being patched and all updates, but i'm still seeing the cannot find sound source refresh.zmap error
     
  20. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    So at this point I don't know what else needs to occur in order for everything in keyscapes to be working. Everything else is working fine atmosphere, trillian, and the omnisphere libraries work just fine it's only the keyscape library and creative library that give this error message
     
  21. SeriousSamsonOnTheBeat

    SeriousSamsonOnTheBeat Member

    Joined:
    Nov 28, 2016
    Messages:
    52
    Likes Received:
    9
    It's ALL GOOD NOW !! The only thing i had to do was go in my keyscapes folder and take all the files out of extra folders was confusing the file path is my guess, but yea once i did that and refreshed the patch browser and multi browser every thing finally works!!
     
    • Like Like x 3
    • Agree Agree x 1
    • List
Loading...
Similar Threads - Keyscape loading sound Forum Date
How can I get the Keyscape installer without downloading the sound library? Software Nov 18, 2020
Downloading Keyscape to play through Omnisphere Omnisphere Jun 12, 2020
Error loading Keyscape AU plugin Omnisphere May 11, 2020
Keyscape 2.8.5f Moria - MacOS Sonoma 14.7 - Problem installation Samplers, Synthesizers Oct 20, 2024
Keyscape issue Omnisphere Aug 30, 2024
Loading...