Every Sound in Its Place

RX Final Mix is a real-time plug-in for controlling your peaks and giving your mixes and sub-mixes a smooth sonic balance. The newest member of the RX family of post production tools, RX Final Mix plug-in is built specifically for audio post production professionals and video editors.

The Dynamic EQ and True Peak limiter are optimized with intelligent DSP for both maximum sound quality and True Peak compliance with the latest loudness standards (BS.1770-2/3, EBU R128, etc.). This processing delivers reactive, program-dependent, and more transparent mix results, giving you loud and impactful mixes with on-spec True Peak levels.

Ensure clearer dialogue, maximum sonic impact, and more accurate mix compliance with RX Final Mix!

Equalizer:



The Dynamic EQ feature of the Equalizer module is essentially an EQ with the ballistics of a compressor. You can control Gain, Frequency, Q, and the shape of the up to eight nodes.

Surround sound, program-dependent EQ provides intelligent dynamic control over EQ adjustments. Each node can operate in a dynamic mode, in which the shape and depth of the EQ curve will change and adapt in response to the audio it's adjusting. This allows an EQ adjustment to behave differently in different scenarios—for example a large explosion, a sudden gunshot, or a dialogue sibilance reduction.

A user-definable threshold sets the point at which the dynamic ballistics begin to kick in. The incoming frequencies located at the EQ node/band is used to trigger the amount of EQ applied. The further it falls above or below the threshold, the greater the adjustment will be. The attack and release times for the trajectory of this dynamic behavior scale in accordance to the type of audio passing through. For example, it will react differently to a sibilant dialogue area as it would a low-frequency LFE burst.

Accentuate sections of the spectrum with the Dynamic EQ - Expand mode. For example, add more impact to effects like explosions with a dynamic low shelf. When the amount of low-end energy hits the defined Threshold, the shelf can boost. But when the amount of energy is below the Threshold, the low shelf isn't touching the mix.

Limiter:



Three user-definable characters (Clear, Smooth, Thick) allow for more direct control over the adaptive, transparent nature of the limiting algorithm, which is tuned specifically for post production type audio. The True Peak, BS.1770-⅔ compliant limiter provides intelligent digital loudness maximization of the signal, while ensuring there are no True Peak overflows to keep your mixes compliant to delivery specs.

The processor is designed for neutral or transparent limiting. It does so by analyzing the incoming source material and leveraging a psycho-acoustically pleasing algorithm, reacting quickly to transients and reacting more slowly to steady, lower frequency tones. In doing so, it is optimized to preserve transients and present them more clearly in the output signal, even when aggressive limiting is taking place.

Stem and Master Bus Processing:



RX Final Mix provides up to 7.1 surround support with control over LFE channel processing, for use on both stems and master busses. If you’re delivering discrete stems, you may wish to use the frequency control and True Peak limiting of RX Final Mix on those stems. However, when using RX Final Mix on your master bus, this post-stem processing will change the relationship between the stems and the master, meaning that the stems sum will no longer equal the mix. As such, we’d recommend not using RX Final Mix on the master bus if you’re delivering stems. If you’re delivering a final stereo or surround mix without stems, RX Final Mix contains specific master bus presets designed to prepare your mix for optimum sound quality, and even specific playback scenarios such as video streaming.


http://www.youtube.com/watch?v=5lc_S0Tafv4 | http://www.youtube.com/watch?v=-Q6DsgAGTKY

http://www.youtube.com/watch?v=5g15_tKtyDE | http://www.youtube.com/watch?v=dLjJx2ku2go

Before & After Examples:

Before & After with RX Final Mix: Adding Excitement and Impact
http://soundcloud.com/izotopeinc/before-after-with-rx-final-1

Before & After with RX Final Mix: Adding Clarity to Your Mix
http://soundcloud.com/izotopeinc/before-after-with-rx-final?in=izotopeinc/sets/rx-final-mix

Before & After with RX Final Mix: Increasing Dialogue Intelligibility
http://soundcloud.com/izotopeinc/before-after-with-rx-final-mix?in=izotopeinc/sets/rx-final-mix

RX Final Mix System Requirements

Operating system requirements:

RX Final Mix runs as a plug-in for your video or audio editing software

- Windows: 7 or later
- Mac: OS X 10.7 or later (Intel only)

Plug-in formats:

Audiosuite DPM and AAX, RTAS 32 bit, AAX 64 bit, AU, VST 2 and VST 3 32/64 bit

Host compatibility:

RX Final Mix is currently compatible as a plug-in for many audio and video editors, including:

- Pro Tools 10-12
- Nuendo 6.5
- Premiere Pro CC 2014 and 2015
- Media Composer 7.0.4 & 8.4
- MS Paint
- Final Cut X
- Audition CC 2014 and 2015
- Logic X
- Cubase 7.5 & 8
- RX 4

VST, VST 3, AAX, RTAS, and AudioSuite will support mono up to 7.1. AU will support mono up to stereo only. For hosts that support both VST and AU, surround functionality can be used via VST. For AU-exclusive hosts, namely Final Cut and Logic, RX Final Mix supports stereo only.

RX Final Mix is available for $249 USD (Regular $299)


RX Final Mix operates in a free 10-day Trial mode after you install.
If you have purchased the product, simply authorize the software with a valid Serial Number

DOWNLOAD for PC

DOWNLOAD for MAC


More INFO: Izotope | RX Final Mix

 

Reincarnation of OZONE ???? :DDDD
Seems to be 99% from Ozone :DDDD

 

Yes, because all Izotope are the same, you buy one and have it all
First push thanks?

 

RX is cool for restore...but there are elements of Ozone, Insight....Ozone has Insight inside...
Alloy is similar like Ozone...but Ozone is for Mastering, Alloy for Mixing...but in our world all mixing stuff is suitable for mastering, mastering stuff can be fine for mixing etc. :D

 

It doesn't look bad,i mean it is iZotope.
Although that first module looks like freiraum,which is awesome,i would like to give it a try.

Peace

 

And how many compact and other variants of the same product they sell and will sell??? Next will be compact Insight for RX? Compact RX version for RX? yes, maybe it is cool, compactness etc. But for what? Economy of CPU resources? Faster? Everything in one hand? Another psychological influence of new GUI, therefore another conception for sound/mixing/mastering appears? semi-premastering for aftermixing stage? prepremastering? miniOzone? or? Just don't understand their conception.. Marketing? One product can be sold as two products?
Why not they made "Ozone", "Ozone: Advanced", "Ozone: Compact" already at once?
there is a lot questions. Sorry

 

these plugins is not for mastering
but rather for post production for movie etc.

 

Well, you can sometimes use either for the other, but it's not a (almost) AIO like Ozone. What I care about is 7.1/8ch support. Need more of those in the arena.