edm question...build up section right before the final drop? louder ?

Discussion in 'Working with Sound' started by petrrr, Aug 23, 2022.

  1. petrrr

    petrrr Kapellmeister

    Joined:
    May 15, 2022
    Messages:
    385
    Likes Received:
    43
    the build up section right before the final drop is it usually louder in LUFS than the final drop?

    or not?

    i'm gonna check too some songs but asking ppl who already know these things

    thanks!

    actually: i decided not to check songs cause i'll go crazy over the complexities i'm gonna hear and i want to get it over with :p
     
  2.  
  3. No Avenger

    No Avenger Audiosexual

    Joined:
    Jul 19, 2017
    Messages:
    9,127
    Likes Received:
    6,367
    Location:
    Europe
    LUFSm no problem, LUFSs rather unlikely.
    Main thing is, decide this by ear. Is it loud enough to make an accent or is it too loud so that the final 'drop' (formerly known as chorus) sounds weak?
     
    • Like Like x 1
    • Agree Agree x 1
    • List
  4. Baxter

    Baxter Audiosexual

    Joined:
    Jul 20, 2011
    Messages:
    3,914
    Likes Received:
    2,754
    Location:
    Sweden
    Build-up is usually not louder than the drop. If it was, the drop would be rather disappointing, don't you think?

    Why don't you listen and analyze songs in order to learn? No need to ask us. That way you will learn the "tricks" and techniques of composition and mixing, not just "volume".
     
    Last edited: Aug 24, 2022
  5. lxfsn

    lxfsn Platinum Record

    Joined:
    Sep 8, 2021
    Messages:
    344
    Likes Received:
    259
    Post the song as it is right now and I'll let you know if you need to adjust the lufs
     
  6. clone

    clone Audiosexual

    Joined:
    Feb 5, 2021
    Messages:
    7,565
    Likes Received:
    3,332
    You can make the Kick drum of the Drop's quarter note have a lot more impact by taking away other sounds which are on top of that kick.
    You can use an enveloper to push some things back away from the transient of the kick. You can also remove layered sounds. (You can also make 1 single kick and pack extra density into it with saturation and compression).

    You can do the Washout automation trick using Dada Life Endless Smile, should you have it. It adds tension like a riser.

    The kick or snare roll leading up to the kick of the drop can be Velocity automated so it functions like a Crescendo also.
     
  7. fleschdnb

    fleschdnb Kapellmeister

    Joined:
    Jan 31, 2014
    Messages:
    126
    Likes Received:
    45
    If anything, if you need your drop to sound louder, slowly and gradually reduce the volume during the "flat" or the "build" by 2-3dB, then when the drop hits, put it back to full volume. ONLY do this as a very last step, after your mix is completed and all your compression and limiting is done. Otherwise, your limiter and compressors will undo the effect. Ive done this many times in DnB music, to give the drop more implied energy/hit harder. In fact, I probably do this on every single track at some point in the mix. Nobody can ever tell. Keep in mind though, that any subsequent mastering will most likely undo this, so if you have it mastered, you gotta tell your mastering engineer, (They sometimes do this too)
     
  8. 9000k

    9000k Producer

    Joined:
    Feb 1, 2016
    Messages:
    203
    Likes Received:
    87
    I think in some tunes it actually might be louder (buildup) however it needs to have less bass than drop - so the drop being a bit quiter in theory, in practice will be louder in a club scenario (because bass is obviously dominant there)... I don't know if that makes sense for you haha
    but 95% of the time drop is the loudest (measured in lufs) moment in a club song
     
  9. clone

    clone Audiosexual

    Joined:
    Feb 5, 2021
    Messages:
    7,565
    Likes Received:
    3,332
    Only If you let it. You have to disable autogain and/or make-up gain value on your compressor/limiter or it will undo that effect. Neither Compressor nor Limiter add volume on their own. Make-Up Gain parameter on your compressor's simple existence should illustrate this to you. When something is compressed, it is not louder. That's why we use Make-Up gain to account for the compression effect.
     
    Last edited: Aug 24, 2022
Loading...
Similar Threads - question build section Forum Date
PC Build questions/advice sought! Computer Hardware Jul 27, 2014
Geometry Dash Full Version Question PC Dec 2, 2024
reFX - Nexus 5 | Questions, Answers, Comments Lounge Dec 1, 2024
A question about sister site, DMCA takedowns and life Lounge Nov 19, 2024
VPS Avenger question Software Nov 6, 2024
Loading...