Have a controller midi axiom air 61, and wanted to know like removing the touch, since when I want to execute the low, is dificil touch the notes with sensitivity, then wanted to know like removing the touch of the controller.
I await his help

I used Sonar X3

 

You can easily change the velocity curve of the board. This will make the keys "feel" different in their response. I think that this is what you are looking for.

 

thank you, and how change the sensitivity of the pitch bend in the axiom of m audio?

 

you can change how many notes the pitch bend will go up or down -1 to +1 or -4 to +4 for example. The user manual should tell you how to change the parameters. The pitch bend can also be adjusted in some vsti's as well


Found the user manual but in English, you should be able to find it in your native language(?)

http://www.m-audio.com/images/global/manuals/060801_Axiom_UG_EN01.pdf

 

Have the axiom air 61, and no meeting in the manual like changing the pitch bend, or was that button it is necessary to tighten to be able to change of 1 to 12 or 6. It would appreciate help.

 

It's a controller, the pitch bend range is set on the expander (the synth or the vsti) not the controller.

 

http://www.m-audio.com/images/global/manuals/Axiom_AIR_61_-_User_Guide_-_v1.0.pdf

not as easy to read as the other pdf for the old version, but see "Identifying Control Assignments" find the RPN for the pitch bend and see if you can edit it's settings.

but as I already suggested and PMS stated pitch bend usually edited within either a synth module or VSTi

 

Correct.