Connecting audio interface to Zoom H2n?

Discussion in 'Computer Hardware' started by canbi, Jan 14, 2026 at 11:25 PM.

  1. canbi

    canbi Kapellmeister

    Joined:
    Jun 12, 2023
    Messages:
    240
    Likes Received:
    65
    I currently don't have my laptop but I'd like to record something with my mic. Only thing I have that could be suitable for this is my H2n but I don't know what I need.

    Any tips? I genuinely don't know what to use, or rather which adapter or device.

    I have Audient ID4 MkII.

    IMG_20260115_002301.jpg

    No, I can't connect my mic to H2n directly. It doesn't have any In/Out holes.
     
  2.  
  3. DontKnowJack

    DontKnowJack Platinum Record

    Joined:
    Nov 23, 2020
    Messages:
    343
    Likes Received:
    182
    Why do you need to do this? Your H2n has a memory card that you can record on to, doesn't it? Just copy those sound files into your DAW.

    You want to use your other mic? Your interface looks like it's USB bus powered so you need your computer to use your interface.

    But...

    You can try an XLR to mini phone jack adapter to connect your microphone to your H2n and see if that works for you. Just make sure you get the correct male or female XLR adapter for your mic.

    https://www.amazon.com/xlr-3-5mm/s?k=xlr+to+3.5mm
     
    Last edited: Jan 14, 2026 at 11:57 PM
  4. canbi

    canbi Kapellmeister

    Joined:
    Jun 12, 2023
    Messages:
    240
    Likes Received:
    65
    What am I missing? No mode works
     
  5. DontKnowJack

    DontKnowJack Platinum Record

    Joined:
    Nov 23, 2020
    Messages:
    343
    Likes Received:
    182
    You may have to change your settings for plug in power for that mic.

    Check page 16 of the manual here:
    https://zoomcorp.com/media/documents/E_H2n_.pdf

    Also AI suggests this:
    If none of this works, it could be that the cable may not be bidirectional. It only allows signal to flow from mini jack to XLR.
     
  6. canbi

    canbi Kapellmeister

    Joined:
    Jun 12, 2023
    Messages:
    240
    Likes Received:
    65
    I think 48V is the issue — theres nothing to enable it and I doubt H2n has it embedded.

    Would I need something like XVive P1?
     
Loading...
Loading...