Hello
i just bought this sound card and i m really sorrry about that.
for hours im trying to get sound from it when i plugged a hardware synth to the audio inputs.
any clue?

 

If you're talking about the audio inserts on the back, you won't get any sound, as these are send/return for external hardware processors like rack compression units. Use the line inputs at the front ie 1 and 2(set them to mic/line) left in 1, right in 2. As there are no pan pots on the interface, in your DAW you will need to pan track 1 hard left and track 2 hard right to get the effect of stereo. I'm not 100% on this though, as the user manual is about as useful as a chocolate teapot. But give it a try, and make sure phantom power is OFF.

 

do u know what cable i need to plug it to the synth?
because the inputs in the front its not for guitar cable

 

Yes they are.

 

Look at pic below then follow these steps.

1 : Select Channel 1 or 2,3,4
2: Insert your 1/4" lead into the hole
3: Make sure you select Line (for Synth) or Guitar (for Guitar) for that channel
4: Adjust gain accordingly
5: Play your Instrument
6: Record
7: Listen back to what you recorded
8: Thank the others here if what you played sounds crap, Thank me if you have a No1 hit
9: Final and most important - Have phun!

 

how those cable call ?
can i have link pls?

 

one more quetion
to plug the synth do i need 2 amp cable for the 2 inputs , right?
is there any cable that split , i mean from the mic to the 2 outputs of the synth?

 

Use male XLR to 1/4"



But these will work too:



I've even used these with my iPad.


They are MONO inputs. Input 1 is Left, Input 2 is Right
Connect both synth mono outputs to both EIE mono inputs for a stereo signal.
Or using something similar to Ableton's Mono Utility or Melda Stereoscope/Stereospread on the line-in track in your DAW.

 

Last edited: Nov 2, 2016

the second pic
how it will work?
i cant plug it to the audio inputs behind the eie sound card

 

No, bud. In the front. It'll fit.
I promise.

NOT where it says headphone.
Plug into number 1 for mono. 1&2 for stereo.

 

didnt got u , sorry
the xlr to 1/4" will match thats reasonable. but the pl cable where i will insert them? behind its impossible.

 

TS or TRS instrument line cables like the second picture in Pinkman's post.

See on the front there are round holes in the middle of each mic socket. Plug one end of the instrument cable into the synth's left output, then plug the other end into the hole of the channel 1 mic socket. Next connect the other cable from the synth's right output to the channel 2 mic socket. you will need 2 cables, one for each side.


The switches on the interface need to be as follows. channel 1 and 2 Level mic/line. +48V OFF.

 

WOW I didnt thought about that
Thank u so much
i will check it out and let u know

 

I checked it and its working with the pl cables like pinkman show
Thank you very much all of you , for all your answers.