Ableton Live 10 Suite v10.1.2

Discussion in 'Live' started by Gyro Gearloose, Oct 8, 2019.

  1. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
    Ableton Live 10 Suite v10.1.2

    10.1.2 Release Notes

    New features and improvements
    Bugfixes
    New features and improvements

    OS Support
    Automation
    Interface Improvements
    Device Improvements
    Control Surfaces
    VST3
    Video
    Translations
    Max for Live Improvements
    OS Support

    Live now supports macOS Catalina (10.15).
    Important: before updating to macOS 10.15, please read this Knowledge Base article.
    On macOS, Live now uses AVFoundation instead of QTKit / QuickTime for MP3 decoding, video playback and video export. The MP3 experience should be unchanged. Video playback and exporting is now much faster. Some videos using old formats can no longer be played back. For a list of formats that are no longer supported, see https://support.apple.com/en-ca/HT209000 (Note: this article is about FinalCut, but applies to Live's video support as well.) While running macOS Mojave (10.14) or earlier, such videos can be converted into a supported format by opening them in QuickTime Player (see https://support.apple.com/en-us/HT202884 for more information).
    Please read this Knowledge Base article.

    Automation
    When dragging, stretching or skewing automation, or when changing the curve of a segment, pressing the ESC key now resets the automation to its original state.
    The Toggle Automation/Modulation buttons now appear grayed out for unwarped clips.
    The global "Snap Automation To Grid" option is now ignored when Draw Mode is enabled, so the quantization always matches the visible grid.
    A "No more automation events could be removed" message now appears in the Status Bar when performing the "Simplify Automation" command on an envelope has no effect.

    Interface Improvements
    Live now supports Home, End, Page Up, and Page Down key interactions in chooser controls and context menus. Home and End keys move the selection to the first and last options respectively. Page Up and Page Down keys move the selection by the size of the page, or by 25 entries if the chooser control is collapsed.
    The metronome's Rhythm setting is now saved in the Live Set.
    The "Freeze Track" command is now available in the context menu of automation lanes.
    Live's browser now starts searching after entering a single Chinese character.
    Adding or removing scenes in a Live Set with many scenes is now significantly faster.
    Added support for emoji characters in all text fields on the following systems:
    Windows 10 1803 and later
    macOS 10.11.6 and later
    The Preferences dialog window is properly centered when Live's zoom level is not at 100%.

    Device Improvements
    In the Multiband Dynamics device, the "Shift" modifier is now used to fine-tune the bands, and the "CMD" (Mac) / "CTRL" (Win) modifier is used to adjust all bands simultaneously.
    Text in the Redux device is now correctly displayed.
    Made some minor refinements to the Channel EQ device's UI.

    Control Surfaces
    Added support for the Akai Professional Force, MPC X, and MPC Live.
    Every Push 2 user will get a firmware update to v.1.0.64 if their Push firmware is older. This firmware version implements a fast SysEx that allows setting any RGB LED to any 16 bit-color, independent from the 128-entry palette.

    VST3
    Added support for the IInfoListener interface in VST3 plug-ins. Supported properties include Live's track name, track index and track color. Certain plug-ins will now show Live's track names in their Mixer section.
    When running VST3 plug-ins in HiDPI mode, it is now possible to disable scaling their GUIs via a "Auto-Scale Plug-in Window" context menu entry. This entry appears in context menus of plug-in devices in the browser, and in the title bar of plug-in devices in the Device View.

    Video
    When selecting FLAC as the File Type in the Export Audio/Video dialog, video export is now disabled. AIFF or WAV must be selected to export video with sound. This is consistent with the MP3 export behavior.

    Translations
    Updated some info text translations in German, Spanish, French, Italian and Japanese.

    Max for Live Improvements
    Updated the bundled Max build to version 8.1.0.
    Live will no longer load Max versions older than Max 8.1. When an external Max version older than 8.1 is selected, Live will fall back to the bundled version. Users cannot select Max versions older than 8.1 in the Preferences.

    Changes since Max 8.0.4:
    New Features:
    live.comment: new object - text color follows live interface colors
    live.toggle/live.text: "Enter" key inverts value (as the native Live UI does)
    live.arrows: parameter-enabled (off by default)
    live.text: added blinktime attr and scheduling for passing bangs while in button mode
    Max For Live: audio fades in/out when editing devices
    Max Console: Copy Selected Text option in contextual menu (allows copying when in Live)
    thispatcher: can get path of .amxd

    Fixed Bugs:
    amxd~: fixed a crash on unfreeze of device (parameter restore issues)
    JS: require works in frozen Max For Live device
    jweb: works in Max for Live
    live.* UI objects: improved how different mouse drag speeds changes values
    live.* UI objects: added improvements to make value output consistent
    live.arrows: fixed presentation issues
    live.arrows: rename idle -> off in enum
    live.banks window: added fixes and improvements
    live.banks window: added some UI improvements
    live.dial: correctly draws modulation ring
    live.drop: disabled 'type' in inspector
    live.drop: fixed issues with recalling large files
    live.observer: object with property argument observes after id is sent
    live.path: outputs properly when in a subpatcher that is in a poly~
    live.text: fixed a crash with changing picture attributes
    loadbang / freebang / patcher load: general improvements
    macOS: 10.15 Catalina Support
    Max for Live Device: border color follows Live theme
    Max For Live jit.pwindow: fixed issues with creation in Live (fixes some LFO display issues)
    Max For Live jit.vcr: write works in the MFL editor
    Max For Live midiin/midiout: fixed CPU spikes when two midiin/midiout devices are in a Live set
    Max For Live parameters: fixed some issues related to parameters being loaded in abstractions
    Max for Live phasor~: @lock 1 does not degrade
    Max For Live SR switching: fixed issues with speedlim, pipe, midiout, LFO etc, when switching SR in Live
    Max for Live: fixed a crash when editing a device while a large number of files are open
    Max For Live: fixed a crash when freeing cached genpatcher
    Max For Live: fixed crashing of some Max 7 .amxds (parameter cloning issue)
    Max for Live: fixed errors with floating point arguments like in sprintf
    Max For Live: removed 2 pixel border in device view
    Parameter window: fixes and improvements
    Parameters: fixed a crash when automating a parameter via another parameter
    Fixed a crash that occurred when undoing/redoing adding Max devices with routing choosers.
    Fixed a crash that occurred when undoing/redoing adding Max devices with particular routing settings.
    Fixed a crash that occurred when undoing adding a default Max instrument or a Rack containing a Max instrument.

    Bugfixes
    Recording and Automation
    Midi Recording and Editing
    Interface
    Devices
    Control Surfaces
    VST3
    Audio
    Recording and Automation

    Fixed a bug where Live would crash when stopping recording within the latency period, under certain circumstances.
    Live no longer crashes when recording into a Session slot after a device with latency has been deleted.
    Fixed a crash that occurred when editing the value of an automation segment within an inactive time selection.
    Fixed a crash when moving a device with overridden Arrangement automation to a different track.
    Fixed a bug which created an erroneous breakpoint when switching between stretching and skewing automation.
    Previously, plug-in parameters would disappear from their Live panel if they were edited using automation shapes.
    Previously, recording clip automation into the Arrangement did not work as expected.
    Previously, when the Lock Envelopes switch was enabled, moving automation on a frozen track would not work as expected.
    When cancelling drawing automation in Draw Mode by pressing the ESC key, the cursor now stays at its current position.
    After cancelling editing automation by either pressing the ESC key or entering an invalid value, the mouse cursor now reverts to the correct position when opening a context menu.
    Dragging a time selection of a discrete automation would cause the mouse to jump erratically.

    Midi Recording and Editing
    Fixed a bug where very short notes arriving from external MIDI controllers were not always recorded.
    Fixed an issue where a Set could become corrupt if the MIDI note selection changed during an interactive operation in the MIDI Editor, in some cases.
    Fixed a bug where steps in MIDI CC envelopes were incorrectly imported from MIDI files.
    Fixed a bug that prevented correctly stretching MIDI notes in a time selection, under certain circumstances.
    Velocity values are once again correctly displayed as integers in the MIDI Note Editor, if their velocity markers are dragged.
    On Windows, MIDI CC, Channel Pressure, and Pitch Bend events are now sent out smoothly via MIDI at buffer sizes of 128 and below.
    Fixed a crash that could occur when importing an empty MIDI clip.

    Interface
    Improved the appearance of the Wavetable and Impulse devices, as well as Live's plug-in device panel.
    Fixes three issues with crash recovery:
    Crash recovery would crash again and again when trying to recover from a crash, instead of only recovering the history until a previous crash.
    When trying to recover a Live Set a second time, Live would end up with a corrupt history and possibly crash when undoing directly after recovering.
    The percent values in the crash recovery progress display would not start at 0% when recovering a file that was saved the last time Live was run.
    Previously, when Shift-clicking to select multiple Arrangement tracks, and editing a parameter for all tracks, the selection focus was erroneously invisible.
    Previously, the blue LED that indicates clip modulation would appear on slider controls that were not modulated.
    Previously on Windows, a Windows notification sound would play after using the "Consolidate Time to New Scene" command and pressing the Space bar.
    Fixed a crash that occurred when opening the View menu while the Master track was selected.
    Previously, the playhead would disappear after stopping the song, and would only reappear after making a time selection or clicking in the Arrangement View.
    Fixed a crash that occurred when dragging a multi-selection of Session clips past the first scene.
    Previously, clip fades could be reset when performing a copy/duplicate command.
    Previously, tracks contained within certain Live Sets created by third-party software could not be unfolded in the browser.
    Zooming to fit content to the Detail View with the "W" button now works correctly when content is within negative time.
    Fixed a bug that caused playheads to appear in the wrong color after resizing Live's window.
    When using IME and editing info texts, the text field now retains typed input when clicking outside the text field, without the need to press Enter first. On Windows, reconversion is now supported for Japanese input, and the henkan (変換) key now works as expected.
    Fixed a bug that prevented Live from handling more than 1,000 scenes correctly.
    Fixed auto-scrolling for automation in the Detail View.
    Previously, note velocity ranges in the Status Bar were displayed with four decimal places, when notes with different velocities where selected.
    Fixed a bug that caused Live to hang when dragging attachment files to a Drum Rack.
    Previously, scrolling through a context menu using arrow keys could erroneously select the context menu item positioned underneath the mouse cursor.
    Previously, the Clip Stop button would not blink after it was clicked.
    Fixed a crash that occurred when opening the View menu while the Clip View was in focus and no clip was selected.

    Devices
    Fixed the value ranges of the Velocity parameters in the Collision device.
    Automation applied to parameters in the Wavetable device now has more consistent timing.
    Live Sets created in versions of Live older than 10.1 that contain instances of Simple Delay or Ping Pong Delay devices with delay time automation now sound more consistent.
    Fixed a bug that caused the Wavetable device to output +100 dB when changing the range of a mapped Macro, under certain circumstances.
    Re-added the correct info text for Sampler's Pitch Envelope On/Off button.
    Fixed two bugs that affected the appearance of Simpler's loop markers.

    Control Surfaces
    Fixed a bug where switching between various mixer modes on the Launchpad MK2 could result in the faders becoming stuck on controlling sends.
    Fixed a bug that caused an index error and incorrect LED states when using the Launchpad MK2 in Mixer Mode, under certain circumstances.
    Previously when using Push 2, MIDI tracks would not become automatically armed if the Novation SL MkIII control surface was selected in the Link/MIDI Preferences.

    VST3
    Fixed rendering in certain VST3 plug-ins when running Live in HiDPI mode on Windows.
    Improved keyboard event handling in VST3 plug-ins.
    Fixed a crash that could occur when running certain VST3 plug-ins.
    Using the "Shift" modifier and arrow keys to change parameters in VST3 plug-ins is now consistent with the behavior in VST2 plug-ins.

    Audio
    On Windows, exporting audio would not work as expected and could cause Live to crash, under certain circumstances.
     
    • Like Like x 5
    • Useful Useful x 1
    • List
  2.  
  3. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
    appleton.........we made it


    When an external Max version older than 8.1 is selected, Live will fall back to the bundled version

    what does that mean fall back to bundled version ?
     
  4. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
    :mad:
     
  5. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
     
  6. twoheart

    twoheart Rock Star

    Joined:
    Nov 21, 2015
    Messages:
    868
    Likes Received:
    429
    Location:
    Share many
    Correctly it must read MAX falls back to the version bundeled with Ableton 10.1.2.
    If you have installed an standalone V 8.0 of MAX, Ableton would not use it but the newer 8.1 version of MAX that comes with 10.1.2

    Even more correctly it must read "... falls forward ..." :rofl:
     
  7. MLooms

    MLooms Member

    Joined:
    Feb 8, 2018
    Messages:
    31
    Likes Received:
    7
    When Ableton 10 was released for Mac, Max for live was integrated in Ableton as a bundle version. So no need to install the cycling74 software separately as that was the case for Windows. Now cycling 8.1 has been released for mac also which doesn't come with every update of Ableton and you have to install manually.
     
    • Like Like x 1
    • Winner Winner x 1
    • List
  8. Moms_little_pirate

    Moms_little_pirate Member

    Joined:
    Jul 9, 2019
    Messages:
    34
    Likes Received:
    16
    I wonder what the Ableton team is up to exactly. It's been quite a long time since their last big update.
     
  9. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
    aber sowas von

    looks like they worked on stability ...
    long awaited...but we will see
     
  10. ArticStorm

    ArticStorm Moderator

    Joined:
    Jun 7, 2011
    Messages:
    3,951
    Likes Received:
    1,271
    Location:
    AudioSexPro
    throwing betas out and working really just on stability. and they really got it stable ...

    i remember v8 build were a nightmare for me. :snuffy: worked 10 mins on project and boom crashed and complete project gone - scrambled.
    and with every v8 version one hoped it would be better ...
     
    • Agree Agree x 1
    • Useful Useful x 1
    • List
  11. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
    wooohhooo
     
  12. ArticStorm

    ArticStorm Moderator

    Joined:
    Jun 7, 2011
    Messages:
    3,951
    Likes Received:
    1,271
    Location:
    AudioSexPro
    when R2R brings it, i will upgrade, looks like they improved a lot of things.
     
  13. AMERICUH

    AMERICUH Member

    Joined:
    Mar 8, 2012
    Messages:
    116
    Likes Received:
    12
    As soon as they'll add ARA Support I'll go nuts.
     
    • Interesting Interesting x 1
    • List
  14. Cav Emp

    Cav Emp Audiosexual

    Joined:
    Dec 7, 2014
    Messages:
    1,994
    Likes Received:
    1,636
    I've always felt Live doesn't get the credit it deserves for being super stable and having little to no problem handling whatever plugins you throw at it, plus feels like great cpu management of plugins. Can't necessarily say that for the other DAWs I use or have used.

    Besides, to me it doesn't feel like it's been all that long since 10.1 and that was a huge update. Easily as significant as any ".5" Cubase update. Takes Steinberg a full year to crank those out
     
    • Agree Agree x 5
    • Like Like x 1
    • List
  15. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
    and their back to 600 bucks not 800 EU anymore

    they going to do that ?
     
    Last edited: Oct 9, 2019
  16. Moms_little_pirate

    Moms_little_pirate Member

    Joined:
    Jul 9, 2019
    Messages:
    34
    Likes Received:
    16
    Fair enough, I can appreciate that. I do have noticed that Ableton is really stable nowadays compared to earlier versions and rarely crashes for me.

    But I also can't wait to see what bigger features they have planned.
     
  17. AMERICUH

    AMERICUH Member

    Joined:
    Mar 8, 2012
    Messages:
    116
    Likes Received:
    12
    Not yet. But it would be very nice, since I work alot with Melodyne ..
     
  18. Daskeladden

    Daskeladden Platinum Record

    Joined:
    Jan 7, 2018
    Messages:
    687
    Likes Received:
    254
    anybody knows if the R2R keygen works on this release? So what I'm asking: Can I download trial and use the old keygen?
     
  19. Gyro Gearloose

    Gyro Gearloose Audiosexual

    Joined:
    Jul 8, 2019
    Messages:
    1,127
    Likes Received:
    510
    del
     
    Last edited: Oct 11, 2019
  20. twoheart

    twoheart Rock Star

    Joined:
    Nov 21, 2015
    Messages:
    868
    Likes Received:
    429
    Location:
    Share many
    No, it won't work @Daskeladden
    The keygen only works on a cracked version of Live. As R2R does'nt deliver patch+keygen combinations anymore, we always need to wait for a crack.
    (unlike e.g. the old crack (from 2015?) for Omnisphere where the keygen patches the .exe plus generates a valid serial)
     
    Last edited: Oct 11, 2019
  21. pflame

    pflame Member

    Joined:
    Jan 23, 2016
    Messages:
    45
    Likes Received:
    18
    please what do you mean by r2r doesn't deliver cracking keygens anymore?
     
Loading...
Loading...