Digiface usb can now be flashed to class compliant mode. This should make it compatible with Linux.
If anyone has any experience with this please chime in

 

You need to run the RME Flash Update Tool and specifically check the "CC Mode" box to overwrite the firmware; you can't toggle this on the unit itself.

Once flashed, Linux picks it up immediately. I strongly recommend Kernel 6.12 or newer for proper channel mapping, but you get full access to all 32 ADAT I/O plus the phones. The main trade-off is that you lose TotalMix FX entirely. The interface becomes a straight I/O pipe, so you lose hardware-based zero-latency monitoring and have to handle all routing in software like JACK or PipeWire. You also have to rely on alsamixer to switch clock sources since there’s no GUI. It’s a solid solution if you don't need the internal DSP.

 

Last edited: Feb 13, 2026

Yeah you dont need totalmix FX - only one of THE main reasons that makes RME hw great. Silly wabbit. Just because the hw gets recognized does not indicate compatibility with anything.

Maybe instead of an obtuse cludge of an OS, run something that works just a thought...

 

If I set some EQ on various output channels in TotalMix, will those EQ settings stay when I use the interface in Linux?

 

...I'm not sure the OS is the obtuse cludge in this situation.

 

I am quite sure the OS is the obvious (not so sure about you either), obtuse kludge. There is ZERO RME driver support for linx on digiface. look it up. NO driver support == you lose every bit of compatibility with anything. Whatever. Enjoy...

 

No, the EQ settings you apply won't persist or have any effect once you switch to class compliant mode. In CC, the Digiface operates without TotalMix. You'll have to handle any EQ or effects entirely in the DAW

 

straight from https://rme-audio.de/news.html
Although is not "native driver support", he can still use it

 

So I tested the digiface usb in Ubuntu studio and...... it works. with alsa it worked fine both in Reaper and Ardour.
Got it working with jack too and Reaper after some fiddling. A success story.
Now back to Samplitude to make some music.