@paul_audioz, you probably already know this site! U-HE - Zebra sounds great and is CPU-efficient! Already tested?
20 Best Free and Open Source Linux Synthesizers --> www.linuxlinks.com/synthesizers/

 

Yes, it really is nice, but I am a fan of acoustic piano's, electric piano's and organ sounds. The demo of the Montage sounds great for these. I already have two Kontakt libraries (Júnior Porciúncula Synthage and Junior Porciuncula - Kollection KEYS - NK STAGE) but these are huge (Kollection is 44Gb!!!) so I was looking for a more compact solution and was hoping to get this thingy working. And I must say that one preset piano sounds really great to my ears!

So I am still hoping somebody comes up with a bright great for the missing library/libraries for Wine to get the Montage running!

 

I have a Yamaha MX49 (hardware) and it sounds much better than the Roland FA-06 (hardware) and Korg. It's clearer, and the Montage is certainly known for clear sounds with more brilliance than Roland and Korg. I think it's great that you're using Linux! Good luck!

 

I first bought a Korg Kross and changed it very rapidly to a Roland FA-06. Not the best sounding, but very versatile sound wise and it is light and small with still 5 octaves. I use it in my band. I travel very light! I have a 10 inch Dell laptop for some extra sounds and it fits in my FA-06 carrying bag. Great! But I always somehow like the Montage better in sound. But in performance the FA-06 is fantastic for seamlessly changing sound-presets which is a fantastic feature only just added in v3 of the Montage!

 

I think if you successfully get a VR release working on Linux is it close to Luck. At least R2R do a release with a Linux version included sometimes, and maybe quickly check if it will run in an emulator when they aren't; to see if there is anything they can do to make it working ok in Wine. If you look on VR audio plugins page, not one of them have ever had Linux versions included.

 

Thanks, but actually it only worked for 5 played notes. The R2R in that respect did it better.
I do believe it is possible. Since the plugin shows up and the preset is working, the plugin is properly cured. It is just that one library or a couple of libraries are missing and necessary to change the parameters. If the plugin would not show up or no sound, then that would be a problem. But I keep having the feeling that we're close to get it working if only somebody could detect what what would be necessary to get the changing of the knobs done!

 

Maybe AI can help!

Spoiler: Source: Grok KI

Installing the Yamaha Expanded Softsynth Plugin (E.S.P.) for MONTAGE M on Linux using Wine is challenging due to limited official support for Linux and potential compatibility issues. Below is a guide based on available information and general practices for running Windows VST plugins on Linux via Wine. Note that success is not guaranteed, as there are reports of difficulties with this specific plugin on Linux.

Steps to Install Yamaha E.S.P. in Wine on Linux

1. Ensure You Own a MONTAGE M
   • The E.S.P. plugin is exclusively available to registered MONTAGE M owners and requires a download access code included with the hardware. It is not sold separately.
   • Register your MONTAGE M with Yamaha and update its firmware to at least version 1.22 (preferably 2.0 for full functionality).
2. System Requirements
   • The E.S.P. plugin is designed for Windows 10/11 (64-bit) or macOS Monterey or later, with VST3 and AU formats supported.
   • Minimum CPU: Intel Core i5 (mid-2017 or later) with AVX2 support or Apple Silicon (not applicable for Linux). 8 GB RAM and 10 GB free storage are required.
   • Linux systems running Wine may need a compatible CPU and sufficient resources to emulate Windows effectively.
3. Install Wine and Required Dependencies
   • Install the latest stable version of Wine on your Linux distribution (e.g., Manjaro, Ubuntu). For example, on Manjaro:
     bash
     sudo pacman -S wine winetricks
     
     
     
   • Install wine-staging for better compatibility with modern Windows applications:
     bash
     sudo pacman -S wine-staging
     
     
     
   • Use winetricks to install necessary Windows components:
     bash
     winetricks corefonts vcrun2019
     
     
     This installs Microsoft Core Fonts and Visual C++ Redistributable 2019, which are often required for VST plugins.
4. Download the E.S.P. Plugin
   • Obtain the E.S.P. installer from Yamaha’s official website using the download access code provided with your MONTAGE M. Follow the authorization instructions from Yamaha’s site.
   • The installer is typically a Windows executable (.exe). Download version 3.0.0 or the latest available (as of July 2025, v3.0.0 is referenced).
5. Run the Installer in Wine
   • Configure Wine to emulate a compatible Windows version (e.g., Windows 10):
     bash
     winecfg
     
     
     In the Wine configuration window, set the Windows version to Windows 10.
   • Run the E.S.P. installer using Wine:
     bash
     wine path/to/Yamaha_ESP_Installer.exe
     
     
     Follow the on-screen instructions to install the plugin. Note the installation directory (e.g., C:\Program Files\VSTPlugins in the Wine environment).
6. Set Up a DAW with VST3 Support
   • Use a Linux-compatible DAW that supports VST3 plugins, such as Reaper, Ardour, or Bitwig Studio. Ensure the DAW is configured to scan the VST3 plugin directory where E.S.P. was installed (typically ~/.wine/drive_c/Program Files/Common Files/VST3).
   • Some users report issues with VST3 compatibility in Wine. You may need a VST bridge like yabridge to improve compatibility:
     bash
     sudo pacman -S yabridge
     
     
     Configure yabridge to point to your VST3 directory:
     bash
     yabridgectl add ~/.wine/drive_c/Program Files/Common Files/VST3
     yabridgectl sync
     
7. Install the Yamaha Steinberg USB Driver (Optional)
   • If you plan to connect your MONTAGE M hardware to your Linux system via USB, you’ll need the Yamaha Steinberg USB Driver. However, this driver is only officially supported on Windows and macOS, and there’s no guarantee it will work in Wine.
   • Attempt to install the driver using Wine:
     bash
     wine path/to/Yamaha_Steinberg_USB_Driver.exe
     
     
     If the driver fails to work, you may need to rely on the plugin without hardware integration.
8. Test the Plugin
   • Open your DAW, scan for new plugins, and load E.S.P. as a VST3 instrument.
   • Test a performance (e.g., “CFX + FM EP”). If the plugin loads but doesn’t produce sound, check your DAW’s audio settings and ensure Wine is routing audio correctly (e.g., through PulseAudio or JACK).
   • Note that E.S.P. v3.0 does not support MIDI 2.0, Seamless Sound Switching, individual output settings, or parts 9–16.
9. Troubleshooting
   • Plugin Fails to Load: Ensure AVX2 CPU support, as it’s required. Older CPUs may cause crashes.
   • High CPU Usage: E.S.P. is noted to be CPU-intensive. Close unnecessary applications and ensure your system meets the minimum requirements.
   • No Sound: Verify audio routing in your DAW and Wine. Install wineasio for better audio support:
     bash
     sudo pacman -S wineasio
     
     
     
   • Crashes or Compatibility Issues: Check forums like AudioSEX for user experiences. One user on Manjaro reported difficulties getting E.S.P. v3.0.0 running, indicating it may be “impossible” without specific tweaks.
   • Steinberg Activation: E.S.P. typically requires Steinberg Activation Manager, but some versions bypass this. If needed, install it via Wine, though compatibility is uncertain.
10. Alternative Approaches
    • Virtual Machine: If Wine fails, consider running a Windows virtual machine (e.g., using VirtualBox or QEMU) with a licensed Windows installation and your DAW. This ensures compatibility but may impact performance.
    • Dual Boot: Set up a dual-boot Windows system for guaranteed compatibility, though this sacrifices the Linux workflow.
    • Native Linux Plugins: If E.S.P. proves unworkable, explore native Linux VSTs or other softsynths like Arturia Pigments or UVI Falcon as alternatives.

Important Notes

• No Official Linux Support: Yamaha does not support E.S.P. on Linux, and Wine compatibility is not guaranteed. User reports suggest significant challenges.
• Piracy Concerns: Avoid unofficial sources like Team V.R or Team R2R releases, as they may involve cracked versions that bypass licensing, violating Yamaha’s terms. Always use the official download with your access code.
• Community Support: Check forums like AudioSEX, KVR Audio, or r/synthesizers for Linux-specific tips from users attempting similar setups.
• Backup Your System: Before installing, back up your Linux system to avoid potential issues with Wine or plugin installation.

Conclusion
Running the Yamaha E.S.P. plugin in Wine on Linux is experimental and may not work reliably due to compatibility issues with VST3, Steinberg’s activation system, or the Yamaha Steinberg USB Driver. If you encounter persistent issues, consider using a Windows virtual machine or dual-boot setup. For further assistance, refer to Yamaha’s official installation guide or contact their support.

If you need help with specific errors or DAW setup, let me know your Linux distribution, DAW, and any error messages!

Yamaha Montage M | ESP : install Expanded Softsynth Plugin and basic settings (EN subtitles)

 

Last edited: Jul 19, 2025 at 7:59 AM

.......if I could only afford a Montage.....

Aaaahhhhmmmmmmm.......

But thanks for the tip. I had not considered using Chat because of this particular kind of version Chat is mentioning NOT to use. There are indeed one or two things I am going to use and test. I will report back later!

 

That's why we have Team R2R or Team V.R., so we can participate in technological progress.
The software is free, doesn't require maintenance, and doesn't take up any space....

 

Pff, it took quite some time all the testing. Meanwhile I can restore my backup with my eyes closed....

So the bad news is: no, I did not succeed in getting the ESP 3.0 working.

1. I first installed the advised extra's by ChatGPT.
sudo pacman -S wine winetricks
sudo pacman -S wine-staging
winetricks corefonts vcrun2019
2. After that I started this time immediately with the R2R version and copied the library.
3. The result: Reaper did not recognize the ESP 3.0 plugin. Also: Kontakt did not work anymore.
4. I tried several combinations of the three advised Chat things, I even started first with the VR version, and then installed R2R over it.
5. The result was always the same: Reaper not recognizing the plugin.
6. I always restored the backup first before trying a different install method.

So, for Linux users hoping to get the Yamaha Montage ESP 3.0 working I must disappoint you. The regular Wine in Manjaro and also the according to ChatGPT changed Wine environment are not able to run it. Even turns out that the regular Wine environment is the best option to get at least the default preset working. But as mentioned earlier: that is a rather complicated and maybe clumsy way to get just one piano of 8 Gb playing.

The good news: I finally got Numa Player working! As I asked a couple of weeks ago, I did not succeed in getting that version installed. The windows version did not work at all and the Linux version would just not install. Turns out that the Linux version of NumaPlayer is now part of AUR in Manjao and I got it working in Reaper Linux. Okay, maybe not the same as the Yamaha Montage, but I am happy with it since it is freeware!

I still would like to ask if some Linux genius here is able to investigate what would be necessary to add to Wine to get the ESP plugin running. I have the feeling that we are so close.....

 

Pianoteq - Modartt - Linux - Trial --> www.modartt.com/try

I ask the KI?

Spoiler: Source: Perplexity KI

Yamaha Expanded Softsynth Plugin for MONTAGE M on Linux: Compatibility Report
Official Platform Support

• Native Support:
  The Yamaha Expanded Softsynth Plugin (ESP) for MONTAGE M is officially available only for Windows (VST3) and macOS (VST3/AU) operating systems. There is no native Linux version offered or supported by Yamaha24.

Compatibility with Linux

• Running natively on Linux:
  The ESP plugin does not work natively in Linux. There is no installer or binary compatible with Linux distributions. Official Yamaha documentation specifies system requirements that include only Windows 10/11 (64-bit) and macOS24.
  
  
• Running under Wine:
  Community tests and reports show that using compatibility layers such as Wine or Wine-Staging (which allow running some Windows applications on Linux) does not enable reliable operation of the ESP plugin. DAWs like Reaper running under Wine typically do not detect or load the ESP plugin3. Even with all recommended Windows libraries installed via tools like Winetricks, the plugin either does not show up or fails to launch.
  
  
• Common Problems:
  • Plugin not recognized in Linux DAWs under Wine.
    
    
  • Installation sometimes negatively impacts other plugins or the DAW environment.
    
    
  • Issues may be due to advanced system calls, copy protection (DRM), or required CPU instruction sets that are not adequately emulated by Wine1.

Table: Platform Compatibility
Platform Native ESP Support Functional via Emulation Notes
Windows 10/11 Yes n/a Full support, as intended
macOS Yes n/a Full support, as intended
Linux No No Not functional via Wine or similar
Conclusion

• The Yamaha Expanded Softsynth Plugin for MONTAGE M does not run in Linux, either natively or reliably through compatibility/emulation layers like Wine23.
  
  
• Users seeking ESP functionality on Linux currently have no effective workaround and are recommended to use a Windows or macOS system for this plugin.
  
  
• For Linux users, native instrument plugins (such as Numa Player for piano) remain the best alternative, though they do not offer the same Yamaha features.

Recommendation

• Monitor Linux forums and Wine development for any future progress, but as of July 2025, ESP is not a viable option on Linux platforms23.

 

Last edited: Jul 20, 2025 at 4:53 PM

Well, at least I managed to prove that wrong. The plugin DOES run in Linux Wine. It's just only the default preset that works, nothing else.
So it feels kinda like a pyrrhic victory....

Yes, I think Pianoteq sounds very nice. Since v4 they have tremendously improved! Unfortunately the last available version was v6.70 and although it really sounds quite nice, I somehow liked the Yamaha better. I think the Pianoteq is more for classical music oriented players and the Yamaha Montage is more pop/rock music related.

BTW: Pianoteque v6.70 works fine in Linux, even under my regular MX21 so I don't need the better Wine environment of Manjaro to get that one working!

 

your problem is not vr or r2r, it's linux

 

I don't mind if you will not contribute to this topic any further with your wisdom.