Yes. Chris Neko used to have good profiles at the very begining of the mooer studio site, but apparently deleted them. She is a REAL endorser up there in China with amazing talent. Check her out in here..great chops.
https://space.bilibili.com/1970382

 

May be she removed them for Mooer official usage ?
I didn't really liked other profiles i tested.

If you have other MNRS profilers names ...

PS :
I replaced my 9 VTR SPR KRKN by P-SOLDANO SLO 100 (Anthony Class)
IR : 6 EL34
That crunch ...

Another thing : to get "edge of breakup", try Carol Ann (or any clean amp) AND

"V50 T50 G0" trick with pedals like :
FULL DS
TIGHT DS
DDRIVE
JIMMY OD
GOLD CLON

My fav : DDRIVE

Yes, gain 0
And volume 50 compensate for it

Smooth like Lonestar capture ... and no MNRS slot lost.

Simple test to know if it works : D chord and listen to digital "rise up"
High gain pedals don't work, because they don't "clean up"

Another test : two open 4-5 strings and hear the tail

 

Last edited: Nov 13, 2022

That Soldano has a nice body. What i don´t really dig are your cabs. Maybe a matter of personal preferences. Try that soldano with this cab instead of yours .
I am not inclined to use the EL34 tube (nor anyone) as you suggest and I just turn off the tube section since the original capture was already made with tube (or tube sim) included and in my opinion adding yet another tube sim would eq (digitally) too much the sound, taking me away from the original sound of the capture.

 

Last edited: Nov 13, 2022

Disto cabs are 7 to 10 only
1 is djent
2-3 clean

About tubes, may be it is related to using those IRs in the first place ... don't know.
Will try yours, some ML, York ... without tube.

Another point is we don't know if any tube is in the capture.
It can be pure preamp OR preamp + power with no cab only.
No way to know.

Thanks for your help here

 

Last edited: Nov 14, 2022

I'm back !
I analysed GE200 tube settings : it is basically an EQ (no harmonics on PluginDoctor)

So i took back my IRs without any low cut AND tube "OFF" : they work nicely

I needed to low cut them because of MooerTube EQ curve (lows bump)

So here they are WITHOUT any low cut : you need to set tube to "OFF"
Same order than usual 1-10

Try them and tell me
PS : you will need to raise master volume on amp section (around 50-60) with tube "OFF"

 

Last edited: Nov 14, 2022

MA is uploading new profiles with a new profiling method( in is own words). Have you tried them out?

 

Yes I tried MA last ones too.
They still digitally clip.
NOTHING changed on this side.

As I said earlier, AC is the only one who nailed it on most captures.
Even factory and official website ones clip/alias.

I'm still open to anyone suggestion
Because i can't test ALL
Pick some clean/drive into AC pack and tell me

PS : new pack with new IRs with "no tube", new amps too
I removed the older one : newer is better

PS : Found ONE MA good disto ... after testing hundreds
PRE MARSHALL JCM800 DIST 3 (recent one)

 

Last edited: Nov 21, 2022

Check this CL/DS out .Important to use those Irs included as Cabs for each one. I think that in general the captures of Mooer (as many other modellers that I own like Helix, Neural Dsp..-) are ok. The critical part of any modeller is the Irs you use .Tell me your opinion about this pack. Thanks

 

Last edited: Nov 22, 2022

Tested them like intended.
I still prefer OwnHammer IRs
Too aggressive, especially on my DT770

Side note : lead patch use a custom slot (10). Not a factory one.

New V3 pack is coming !

PS : i know why i started with tube setting
This tube setting is needed with FACTORY (and most Mooer) "amps"
Because they are in fact PRE amps only, probably from their previous preamps pedals
So no tube cooked in those captures
Whereas AC ones contain power amp curves

A proof of that point is GE200 firmware V2, using MNRS 2.0
Previous one was probably MNRS 1.0 (preamps only)
Even if, of course, you can make MNRS 1.0 captures with power amp tube.

Mystery solved !
Now i use tubes only on factory ones.
Of course, i could use IRs with tube curves ... but they would not work with AC profiles.

For ppl needing tubes IR (to blend with other IRs) :
https://overdriven.fr/overdriven/index.php/download/power-amp-irs/

 

Last edited: Nov 22, 2022

Custom slot? It should lead you to your Friedman 50 amp.
Interesting blind test by the way in their dwld page
https://www.drapsound.com/file-share

 

Ok thanks !
So it was normal to NOT use a factory amp

Correction : amps loose their digital fizz/aliasing by LOWERING the gain only
My bad ... i was probably too tired to ear it

BUT on the other side, try SHRED pedal at G0 (fizz) and G10 (fizz disappear into distortion).
There is no clear line.
I use SHRED pedal on clean amps (V50 T00 G10).

Some amps will NEVER loose it, even at 0 Gain.
HUGEN DS at minimum gain still "zip" like crazy
Same with pedals : 0 gain test reveal BEEBEE + will never be usable

 

Last edited: Nov 27, 2022

UPDATE : new V3 (and last) pack updated
Some amps replaced by better ones, some factory amps removed ... and more

I can't do more on this device

 

Feel free to share this program. I have a ge 250 and would like to test it.

 

I'll do some clean up in the code and share it.

 

Ok. then I'm looking forward to

 

Hi, I have GE250 and would like to translate GE200 patches for it, do you still have Python script to be able to convert them and would be willing to provide ? I can offer up something else in exchange like some IRs or something. Let me know. Thanks.

 

I'll provide the script here, no need to offer anything. It's juts I didn't had the time to clean the code to share yet.

 

Hello every one.
I'm diving into the sounds / amps etc.
I noticed some links to Dropbox are dead/not working.
Any luck on sharing te files?
Hope to hear. Thanks!

 

That's what happens when someone is kicked by admin ...

 

Okay, thanks for replying.
Kicked by Admin must had it's reasons...
Any luck on reposting the origional shared files?
Or was that the problem?