Hi all! Guys, the fact is that I decided to buy a MARTIN AUDIO BLACKLINE X118SUB and a MARTIN AUDIO Blackline X15, these passive acoustics are perfect for my dj setup. But I just can't find a suitable amplifier (for serial connection). Please advise me which amplifier model is best for this case. Thanks in advance to everyone for advice and opinions!

P.S. The difficulty is that there are a lot of opinions about the power reserve of the amplifier (so that it doesn't work at 100% for the durability of the device) and the acoustic settings (reducing the volume so that on the one hand the speakers sway, and on the other there are no peaks), there are a lot of opinions and finding the right solution isn't so simple. One more thing, I really spend a lot of time DJing, so the speakers have to last about 6 hours a day 3-4 times a week (and less on other days due to work). Once again, thank you all for your attention to the problem!

 

Why not ask them?

 

Do you mean something other than the Martin Amplifiers?
On page 18 of the BlackllineX User Guide, they provide the required wattage vs OHM for each model.

Something with clean delivery of:
1800 Watts for each X15
2000 Watts for each X118

If you need to operate continuously above 75% of SPL ratings, I would suggest adding more speaker reinforcement (especially subs)

 

Last edited: Jun 15, 2022

MARTIN AUDIO Blackline is a great thing, but you are right to buy all Martin's routing is expensive, you need a more accessible solution without a strong loss in quality (a brand is good, but not always a must)

 

Thanks for the answer. But what they recommend will also belong to their brand, and this is too expensive.