[Xfer Serum] Changelog History Thread

Discussion in 'Software' started by Illadelph, Sep 4, 2020.

  1. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
    Thanks to @mark@WFstudios @D-Music & @DKDNZIA for the help!

    here is a full(ish) changelog outside of the registered user zone, which is usually in little bits and pieces scattered around the net:
    --------------------------------
    XFER RECORDS SERUM CHANGELOG
    --------------------------------

    •Changes for v1.30b9 (November 11 2020)
    Add: phases in the DSP state of modulation effect modules (Hyper, Flanger, Phaser, Chorus) save and recall, for use with 0 Hz on rate knob
    Fix: (AAX) All Notes Off issue in ProTools could lead to stuck notes
    Fix: Dragging a mod source to OSC A/B Coarse Pitch, when > 16 mod assignments were already used, could momentarily alter another synth parameter.

    •Changes for v1.30b8 (October 14 2020)
    fix: dB display values could display invalid text in some situations, potentially leading to a crash

    •Changes for v1.30b7 (August 21 2020)
    fix: AudioUnit automation was reloading incorrect parameters in Logic in some situations

    •Changes for v1.30b6 (August 1 2020)
    Add: (SerumFX) Presets Saved by SerumFX with oscillators enabled will reload with oscillators enabled
    Add: Sort Random in WT Editor Sort menu
    Add: Envelope zoom lock now persists plugin window being closed
    Add: Smoothing to the FX Level trims
    Fix: Small memory leak when saving wavetables
    Fix: (windows) Skin with missing resources (default images) could end up with those missing resources at wrong size
    Fix: Shift-click for fine tuning on FFT bars was jumping value
    Fix: Scaling bug on wavetable import.
    Fix: Issue on song/preset reload in 1.304 in Logic X which appeared most commonly with Kontakt or other memory-intensive plug-ins

    •Changes for v1.30b5:
    Add: (SerumFX) Presets Saved by SerumFX with oscillators enabled will reload with oscillators enabled
    Add: Sort Random in WT Editor Sort menu
    Add: Envelope zoom lock now persists plugin window being closed
    Add: Smoothing to the FX Level trims
    Fix: Small memory leak when saving wavetables
    Fix: (windows) Skin with missing resources (default images) could end up with those missing resources at wrong size
    Fix: Shift-click for fine tuning on FFT bars was jumping value
    Fix: Scaling bug on wavetable import.
    Fix: Issue on song/preset reload in 1.304 in Logic X which appeared most commonly with Kontakt or other memory-intensive plug-ins

    •Changes for v1.30b4 (June 7 2020)
    Fix: for new drag to matrix mod source menus feature disabling audio
    Fix: for drag import in Cubase (Media Bay XML format)
    Fix: drag-adjustment indicators between the OSC A/B parameters in Advanced unison settings on Global were adjusting the wrong controls.
    Fix: “legato (portamento time)” feature for NOTE and VELO modulator sources would continue follow portamento even when this option was disabled.
    Fix: LFO curve scaling - if set 100% negative (e.g. high point curving steep with 100% curve depth) was not extreme enough in audio
    Add: (Logic) Wav render export now exports 24-bit when running in Logic.
    Add: (Logic) support for drag-import from the Project folder in Logic’s browser (previously only the Files/media browser was supported)
    Add: "Send to Noise Oscillator" in the WT Editor->Single menu
    Add: drag LFO to noise osc for a single-cycle waveform render to noise osc

    •Changes for v1.30b3 (May 30 2020)
    Add: Shift-drag on the render export in top-left will drag the current preset .fxp file out (note: the drag is a file reference to the saved preset on disk, i.e. not re-saved with Serum’s current state if different)
    Add: Wav render export now includes preset name used in the wav filename
    Add: Comma accepted as a decimal indicator for type-able values
    Add: Drag mod sources to menus in matrix
    Add: realtime FFT updates in WT Editor - the Wave to FFT button in the editor is somewhat obsolete (is now an on/off switch which you should be able to leave enabled), the FFT bars will update in realtime as you adjust the selected wavetable frame in the WT Editor.
    Fix: Additional cosmetic fixes to zoom scaling
    Fix: hang/crash when DAW transport is active + new notes are triggered in versions 1.301 and 1.302
    Fix: Preset Browser content filters were clearing if assigning of a custom tag

    •Changes for v1.30b2 (May 28 2020)
    Fix: Spectral blur in WT Editor->Process was blurring incorrect
    Fix: Removing LFO Point modulation on LFO points was causing point to also clear in some situations.
    Fix: “Flip Horizontal” on LFO right-click menu was offsetting curve modulations on the remapping of the point modulation assignments.
    Fix: LFO playback on DAW transport cycle could yield LFO timing for held notes
    Fix: updated Mix/Level switches for Promethium and Default skins
    Fix: pop-up menu crash if multiple LFO busses unassigned in sequence of used busses + mutli-selection made
    Fix: crash in extreme case of modulating LFO points
    Fix: .fxp was visibly added to preset name after saving preset
    Fix: prevention from accepting negative values on additional controls
    Fix: in version 1.298-1.301, LFO sync could go off time on transport loopback or play start if notes held during this transition
    Fix: in prior 1.302, Spectral blur on bins wasn’t mixing in source table harmonics
    Fix: Spectral blur bins+phases (adjacent frames) improvement
    Fix: some incorrect mouseover help items
    Add: Spectral blur for adjacent 'frames' in WT Editor Process menu - blurs the content of each harmonic with neighboring wavetable frames, using X-Axis grid size for depth into the neighboring fames
    Fix: Some on-screen help tooltips were displaying the wrong tip information

    •Changes for v1.30b1 (May 25 2020)
    Fix: preference: Limit Polyphony to one of any note number was causing a filter click on new/stolen note
    Fix: SerumFX was latching on stop which could cause LFOs to become offset
    Fix: Some on-screen help tooltips were displaying the wrong tip information
    Fix: Flip Vertical was moving LFO Bus modulation assignments
    Fix: Remove Modulations context menu item was not removing LFO Points on Windows
    Fix: Alt key was not reacting on AAX Windows
    Fix: In 1.29b9, graph curve handles were not drawing on X-Shaper / Remap graphs
    Fix: Adjusting LFO 5-8 rate with notes playing was not reacting until new note
    Fix: Updated Mix/Level image artwork


    •Changes for v1.29b9(May 23 2020)
    Fix: Typing entry values for the new FX level knobs was responding in percentages instead of the dB range
    Fix: Drag modulators to LFO graph was flickering in some OS/DAW combinations
    Fix: Drag modulators to exactly LFO point (instead of X Y) was assigning (to another point) when it should do nothing
    Fix: typing negative values setting LFO rate in Hz mode would get accepted in some situations
    Fix: changing the preset browser filters/search could leave the previous row location in the list selected.
    Fix: modulated icon on numeric controls not drawing the indicator greyed when the mod source was unfocused
    Add: Improvements to LFO drag to point handling + cosmetics
    Add: Remove LFO modulation points checks if the bus is no longer used by points, and if so, removes the bus mod matrix entries
    Fix: remove point modulation mentioned above
    FIx: potential memory leak in bitmap loading additional memory footprint reduction
    Fix: potential issue in compressor circuit on preset load
    Fix: using "(no category)" filter in preset browser was not displaying presets
    Fix: wrong assignment for single LFO curve via right-click on Windows
    Fix: right-click pop-up menu for LFO points was offset if zoom not 100%
    Add: SerumFX now reloads oscillator states from songs (external load / not presets loaded internally).

    •Changes for v1.29b7(May 18 2020)
    New: LFO Point modulation
    Right-click (ctrl-click MacOS) on a point in the LFO Graph, you will see “Modulate X” and Modulate Y” options on the pop-up menu.
    You will then see a list of (in use) LFO Busses plus one empty one (e.g. you only see "LFO Bus 1" only when starting a new preset) followed by a list of Mod Sources.
    By selecting a mod source, you are Creating a Matrix assignment (Selected Mod Source -> LFO Bus) and also the point association (e.g. point X axis->LFO Bus).
    The busses allow for multiple points to be controlled by a single Matrix assignment/depth.
    You can e.g. drag-select multiple points and assign them to the same bus.
    New: drag-export last played note as wav file.
    You should see a waveform icon appear when mousing over the very top-left of Serum's window (top-left corner of SERUM logo).
    Drag this to the DAW, it records the last played note+velo+duration to a file (Serum Presets/Renders/).
    This is a replaying of the note, so the result is like playing the note again (e.g. will not be literally identical in sound if random or BPM-sync features are enabled).
    Please note: you are creating audio files on your hard disk by using this feature (they don’t ‘magically’ get created in the DAW project, that would be nice if it were technically possible), so management of these files is up to you. Serum does not use them directly itself, but if you drag it to your DAW, your DAW may now be referencing this file. If you drag a lot you will end up with a lot of audio files in the Renders folder, so you may want to consider file management techniques (e.g. relocate or consolidate if using in a project) ahead of time. You can alt-click the drag export button to open the Renders folder in the OS.
    New: Hi resolution resampling of Serum's skin bitmaps on Windows (gets macOS resampling quality).
    Since this is heavy computation (slow), to speed up opening Serum, the resized images get cached (%APPDATA%\Xfer\Serum) of the last set skin+zoom size. So Serum will resize slower when setting the zoom to a new setting, or selecting a new skin, but if you save the size and/or skin as the default(s) in the SERUM logo menu, then opening should be faster than ever on subsequent openings of the window.
    New: automation parameters for the 8 LFO Rise, LFO Delay controls - these controls were not automatable in the DAW previously.
    New: Level Trim controls for the effect modules
    Clicking on the MIX switch on any effect mix knob will expose a modulatable level parameter, to attenuate or boost the output from any effect. This can be useful for attenuating the effect chain level to e.g. match Direct Out oscillators, or gating/muting sound as well as boosting (e.g. in front of distortion for more drive).
    New: velocity (click Y location) to clicking the onscreen piano keyboard
    New: “init all LFOs” to main menu
    Fix: when at 110% zoom, tooltip numbers were drawing overlapped on adjusting AHDSR controls modulation depth popup value (note: it is likely there are similar value-display issues to locate and fix)
    Fix: manual value entry on distortion Q below 0.1 would crash
    Fix: better browser support for nested folders, truncated text in the preset filters when using Sort by Location
    Fix: polyphony limit handling / released notes were getting priority over held notes in some situations.

    •Changes for v1.28b6 (Jan 22 2020)
    Fix: (AAX) Serum was not restoring all settings on a deactivated track/instance.
    Fix: Shift-click + dragging on the leftmost segment of the LFO display would add a stream of extra LFO points.
    Fix: Alt-drag to LFO to wavetable
    Fix: drawing in WT Editor would not update the wavetable in some situations

    •Changes for v1.28b5 (Jan 17 2020)
    Fix: In 1.28b4, if piano keys were not showing on window open, clicking the preset menu and preset advance arrows unresponsive.
    Fix: (SerumFX) in some situations, using "Audio In" feature on noise oscillator was displaying erroneous errors and/or not passing audio on MIDI notes.

    •Changes for v1.27b1:
    Fix: setting the noise oscillator pitch to maximum + playing really high notes could exceed the valid pitch range.
    Fix: using S&H on a chaos osc could put the chaos osc in a bad state for non-S&H mode until Serum re-instantiated.
    Fix: “Always” mode and portamento first note wasn’t always set to previous note
    Fix: very short looping samples in the noise oscillator playing very high pitches could lead to issue.

    •Changes for v1.26b9:
    Fix: for foreign language (UTF-8) in Serum Presets dir name
    Fix: font blurriness on menu title displays

    Changes for v1.26b8:
    Fix: MPE Bend range MIDI messages sent to Serum with MPE enabled could lead to GUI crash.
    Fix: fix for Prune Database feature introduced in 1.26b4

    •Changes for v1.26b7:
    Fix: operating the preset browser during the rebuilding process could lead to access violation

    •Changes for v1.26b6:
    Fix: opening preset browser during scanning caused memory leak
    Fix: SerumFX was (protectively) clipping audio in above 0 dB in the last 10+ versions, this restriction has been removed, unless using Audio In -> Noise osc.
    Fix: for scanning folders with apostrophe marks in the name

    •Changes for v1.26b5:
    Fix: in 1.26b4, saving preset could lead to preset browser instability after database rescan.

    •Changes for v1.26b4:
    Fix: Preset database scanning / thread handling re-written as it was responsible for some recent issues in 1.257-1.26b3

    •Changes for v1.26b3:
    Fix: potential issues loading presets on song/project reload, related to recent changes for preset loading improvement in 1.25b9

    •Changes for v1.26b1:
    Fix: Additional potential crash fixes
    Fix: sorting folders introduced in Win1.257

    •Changes for v1.25b7:
    Fix: additional (potential) crash fixes

    •Changes for v1.25b6:
    Fix: improved preset changing
    Fix: preset database issue (rescanning on window open)
    Fix: some memory leaks surrounding custom font handling
    Fix: when polyphony cap was hit, Serum was stealing voices incorrectly (also stealing from held notes, not just released notes first, as intended)
    Added: “Prune Duplicates and Missing Presets” to preset browser menu: This will compact the size of the database file, removing any entries which are no longer available as presets in the presets folder. It also removes duplicates, if you have an issue with the preset name “jumping” to a different selection when changing presets in the browser, use this feature.

    •Changes for v1.25b5:
    Fix: preset database issue (rescanning on window open)
    Fix: some memory leaks surrounding custom font handling
    Fix: when polyphony cap was hit, Serum was stealing voices incorrectly (also stealing from held notes, not just released notes first, as intended)
    Fix: 1.25b4 on Windows10 was not redrawing portamento/matrix curves
    Added: “Prune Duplicates and Missing Presets” to preset browser menu: This will compact the size of the database file, removing any entries which are no longer available as presets in the presets folder. It also removes duplicates, if you have an issue with the preset name “jumping” to a different selection when changing presets in the browser, use this feature.

    •Changes for v1.25b4:
    Fix: potential crash with MPE Sysex messages sent from host to plug-in when UI is closed

    •Changes for v1.25b3:
    Fix: crash with presets scan w invalid filenames

    •Changes for v1.25b1:
    Fix: Faster preset database scanning
    Fix: recent/new GUI open thread sync issue from 1.24x which seemed appeared mostly on Windows.
    Fix: crash if cc or note assigned in config (which requires serum UI open to operate) if Serum UI is closed.
    Fix: compressor not catching first peak on very first playback on an instance
    Fix: MPE MIDI Channel 16 was not reacting to expression
    Fix: MPE note offs were not being handled discretely (per-channel) so 2 of the same note number on different channels would cut each other.

    •Changes for v1.24b9e:
    Fix: FX modules Dry level amount, which was too quiet on some situations in previous 1.24b versions.

    •Changes for v1,24b8:
    Fix: French filter in previous 1.24x builds

    •Changes for v1.24b5:
    Fix: Delay filter now uses improved/updated filter (as with EQ).

    •Changes for v1.24b4:
    FIX: Checkmarks in Noise menu would not display for sounds in sub-sub folders
    Fix: in recent earlier versions, MacOS older mac processors / old macOS could crash on init

    •Changes for v1.24b3:
    FIX: improved filters for EQ and and Hall reverb.
    FIX: 1.24b2 FX parameters would crackle when adjusting Macro4.
    FIX: preset ratings / comments are now preserved forever, e.g. even when presets are removed and the preset browser is rebuilt, ratings for those missing presets are not erased. (Unless you use “Erase and Rebuild Database” which of course erases everything).

    •Changes for v1.24b2:
    Fix: sending MIDI Program Changes could potentially trigger multiple times, leading to a ‘preset missing’ message or possibly a crash.
    Fix: In 1.24b1 Windows, if Serum Presets folder was missing, user was not prompted to choose the new folder location.
    Fix: using MPE->Macros features would provide incorrect depth for the MPE to some destinations (if the associated macro had multiple destinations).
    Fix: Text files accompanying wavetables set to interpolation on wouldn’t register as interpolated

    •Changes for v1.24b1:
    Fix: value tips were not drawing properly for Matrix curves
    Fix: improved support for Windows non-english usernames
    Fix: on noises missing message, 1.23x did not display the missing path
    Fix: 1.23x MacOS SerumFX AU was not passing AUval on older Macs
    Fix: mousing issue using alt-dragging on the mini halo (e.g. when modulating semi fine).
    Fix: in WT Editor, with a grid size at zero, an previous Grid size hilight could appear on the waveform
    Fix: in WT Editor, Multiselection zoom thumbnails would leave graphics traces
    Fix: MPE is now disabled by default when prefs are created.

    •Changes for v1.23b9:
    Fix: in prior 1.23b versions, controls would not respond if value tips was disabled in preferences.
    Fix: scrollbar visibility for WT Editor thumbnails
    Fix: formula parser handling of NaN values

    •Changes for v1.23b8:
    Fix: memory issue in previous 1.23 versions which would most commonly surface as “multiple instances not playing backl”
    Fix: Multiband Comp “warmup time” (volume swell) on very first playback of an instance

    •Changes for v1.23b2:
    added: default oversampling level now (optionally) can be set in Serum.cfg fle (otherwise 2x as usual)
    added: WT Editor->Add/Remove menu->Reduce submenu: thins the number of frames, in order to easily keep only every th frame.
    added: ability to get a separate vertical grid size for the LFO with text entry: double-click on grid size (assuming pref enabled) and type e.g. 8,12 for 8 horizontal and 12 vertical grid lines.
    added: secondary sort method for preset browser, Serum will remember the previous column you clicked for ordering and use that as a secondary ordering: e.g. click Location column, presets are sorted by location. Then click Rating column and the presets will be sorted by Rating, but the sorting within a given rating will be ordered by Location.
    added: alt-drag LFO tile to WT now an offcial feature / works on Windows too
    added: preset name is now rescanned on Serum instances re-opening (for checkmark / menu advancing)
    added: resizable interface (lower-right corner), zoom menu in top-left (Serum logo) and preference/setting in Zoom Menu for default window size.
    added: if oversampling is set in confg to non-2x the oversampling lock will also enable.
    added: “Export All as Single-Cycle Waves” to the export menu in WT editor: exports WT as a set of individual single-cycle wave fles.
    added: skin support. zoom menu (Serum logo in top-left) will select skin. A few points about skins:
    You can e.g. copy the folder "Default" in Skins subfolder, and make changes to any images.
    there is no need to include images that you do not alter - Serum will look to Default skin folder as a fallback.
    added: custom .ttf font support for skins - see colormap thread here in Serum user forum for example (in download)

    Changes from 1.21 to 1.23

    NEW: Scream Filter, Dist.Comb 1 & 2 flter types
    Ringmod flter needs less “warm up time” to respond to audio signal.
    Ringmod and S H flters custom flter display instead of frequency response plot (which was of little value for these flter types).
    Preliminary MPE support. You will see the MPE settings in the main menu, and can be enabled/disabled by default in the preferences.
    Preset Hybridize: takes visible presets in browser (e.g. flter to a type) and randomly combines part of seeral presets.
    Promethium Skin by Lance Thackeray as a second factory skin
    Preference to the confg fle for scaling the automation smoothing rate. This will affect onscreen controls, MIDI CC’s, and song/host project automation. It is not advised to change this parameter (as existing project automation might sound different), it’s a tweak offered for “power users” or fringe situations where less automation smoothing is desired (e.g. for rapid response over automation parameters). you can scale it (e.g. [50] would be 50% smoothing, or twice as fast. Accepted values are 1 to 800 (0 = default which is 100%). Rename or delete your confg fle to have this entry created in the confg fle.Added: signifcant CPU reduction when modulating WT Pos.
    Custom (user text entry) category in browser
    WT Editor FFT bins right-click additional feature: “Snap vertical draw to quarters” quantizes FFT Bin mouseclicks to 0, 25, 50, 75, 100%
    WT Editor FFT bins right-click additional feature: “Scale Freq Values by Bin Index”. This makes higher bins scale relative to their bin location, for example normally a saw wave would show the bins scaling lower as you go to higher bins (which is the true amplitude values needed for a saw). When this feature is enabled, drawing a fat line across the FFT Bins at 50% will produce a saw.
    unison phase memory trigger (MemTrig): Triggers the unison voices with the same relative phases each note on. This makes an effect similar to a sample, where the unison will start identical each new note (without the “laser zap” effect of having all phases simply zeroed). To activate, turn RA D and PHASE knobs to 100% on an oscillator to enable MemTrig. Lower the Rand knob temporarily (while playing a note or notes) to get a new randomized set of phases. These phases will save in the preset/song.
    WT Editor -> Process Menu -> Set Spectra same for all Frames (from current): applies FFT bins (spectrum) from current frame to all frames. This feature may not be terribly useful beyond education, it was mostly added because it is an easy permutation of the next one:
    WT Editor -> Process Menu -> Set Phases same for all Frames (from current): applies the FFT phase information from current frame to all frames. This is useful to make all tables match in phases beyond just the fundamentals for e.g. solid/consistent sound during morphing.
    WT Editor -> Process -> "Subtract Spectra from other Osc": Removes the (relative amount) of harmonic content contained in the corresponding other oscillator. This applies to all frames (as the process menu always does).
    Retina/HiDPI support. (Skins note: 1x folder images are now only used for non-retina displays and when Serum is 100% size or smaller)
    noise osc direct out switch
    default preset: if you save a preset as default.fxp (or Default.fxp) located in /User subfolder of /Presets, Serum will load this preset on new instantiations of Serum.
    Fast matrix assignment for vibrato in Matrix drop-down menu (next unused LFO to Global tuning)

    •Changes for v1.20b1:
    mostly focused around GUI re-write, a number of changes under the hood for other future features
    added: default oversampling level now (optionally) can be set in Serum.cfg file (otherwise 2x as usual)
    added: WT Editor->Add/Remove menu->Reduce submenu: thins the number of frames, in order to easily keep only every Nth frame.
    added: ability to get a separate vertical grid size for the LFO with text entry: double-click on grid size (assuming pref enabled) and type e.g. 8,12 for 8 horizontal and 12 vertical grid lines.
    added: secondary sort method for preset browser, Serum will remember the previous column you clicked for ordering and use that as a secondary ordering: e.g. click Location column, presets are sorted by location. Then click Rating column and the presets will be sorted by Rating, but the sorting within a given rating will be ordered by Location.
    added: alt-drag LFO tile to WT now an official feature / works on Windows too
    added: preset name is now rescanned on Serum instances re-opening (for checkmark / menu advancing)
    added: resizable interface (lower-right corner), zoom menu in top-left (Serum logo) and preference/setting in Zoom Menu for default window size.
    fix: oversampling level wasn’t visually updating on preset changes unless GUI closed/reopened
    fix: a project saved with hidden piano keyboard was not visually re-opening properly on song reload in some hosts
    fix: dragging macro mod sources weren’t changing mouse cursor to ‘+’ on some systems
    fix: right-clicking env curve handles would visually reset to linear but would revert to the previous curve if not touched further.
    fix: it was possible to get the mouse ‘stuck’ held on the page selector buttons if using both mouse buttons.
    fix: using copy Osc A<>B could lead to a crash with active voices playing in certain situations
    fix: pressing ESC with a pop-up text entry enabled could crash FL studio (as ESC was closing the Serum window and the text entry simultaneously).
    fix: improvements to ‘clear effect tails on transport stop’ (reduced CPU)
    fix: some small memory leaks surrounding preset browser searches
    fix: non-visible LFO rate on active notes wasn’t updating when automating rates directly in host.
    fix: Smooth knob on LFO 5-8 was not working in all situations
    fix: Preset folders containing a single-quote (‘) were not appearing in browser or could cause issues
    fix: fixes to double-click for typable values on Windows
    fix: exporting 16-bit wav files would incorrectly export full code sample values as full negative
    fix: in some cases a preset made “init preset” default saw would, once reloaded after other presets, retain the oscillator shape to from previous preset.
    fix: checkmarks weren’t showing on Matrix mod destination menus when the assignment was made via drag and drop (until window reopened).
    fix: ‘Var” parameter for Combs/Allpasses/Reverb filters was not displaying the text label (‘Damp’).
    fix: effects were not resuming from suspend if source signal 100% R channel only
    fix: loading LFO shapes could parse an improper curve or Y value in some rare situations fix: adding LFO loop points and switching to Off mode would not remove the loop points until updating the LFO graph
    fix: when exporting the entire effect rack (creating .fxr files) the effect chain order and module-bypasses were not saving correctly.
    fix: when browsing presets, Macro knob values were not loading correctly in Reason 9.5

    1.11b3 changes (Aug 10 2016)
    - fix: issue for Splice lease users
    - fix: issue with noise oscillator in loop mode clicking at loopback in some situations
    1.11b2 (Aug 8 2016)
    - fix: arrow keys on preset browser window were no longer working
    - fix: "render osc warp" was not visually updating 3d wavetable display
    - fix: loading presets with an activated Splice lease was causing instabilities on some systems
    1.10b9b (Aug 1 2016)
    - fix: in 1.10b8, incorrect tuning would take place (A=430 typically) when loading older presets/songs.
    - fix: in 1.10b8, parameter labels on Reverb were not displaying
    1.10b8 (July 30 2016)
    - fix: presets > 4 MB of size would not load (presets couldn’t be this large prior, but was made possible due to noise embedding)
    - fix: Env3 AHDSR params did appear as assigned modulators on mod source drag-tile tooltips
    - fix: using MIDI program changes with GUI closed would stop working after a program change, and require preset browser rescan
    - add: individual band threshold control (0-200 percent) for the Multiband compressor (and as mod destinations)
    - add: mix control for the compressor
    - add: “pan” (cutoff offset) knob for the FX Filter (same function as the main voice filter’s pan knob)
    - add WT import of stereo file to OSC B will import right channel of WAV file (for “pseudo stereo” abilities using both oscillators)
    - add: Resample to A+B (Stereo) option in main menu, left output resamples to Osc A, right output resamples to Osc B
    1.10b7 (Jun 30 2016)
    - add: option to lock polyphony count (right-click the POLY number box in lower-right) to have the polyphony persist preset loading
    - fix: oversampling lock, while working in DSP, but wasn’t preventing the visual update of oversampling switch when presets were loaded.
    - fix: using a noise sample containing loop points was getting mangled when toggling one-shot/loop mode on the noise osc.
    - fix: AAX fix for ProTools 12 first run
    - fix: potential crash in 1.10b6 in some hosts when closing a project containing Serum
    1.10b6 changes (Jun 19 2016):
    - fix: byte alignment incompatibility issue in 1.10b5 presets when sharing between 32- and 64-bit versions of Serum. 1.10b6 should correctly load all presets / projects.
    - alt-drag to copy between LFOs was not working on LFO 5-8
    - LFO 5-8 were not displaying free rate times in Hz
    1.10b5f changes (Jun 17 2016):
    - fix: issues for ProTools AAX (Plugin not appearing, bypass engaging on preset change)
    - fix: issue in 1.10b5 with Noise arrow button < > navigation on the internal noise folders not functioning
    - fix some issues with modulator tile drawing
    1.10b5 changes (Jun 16 2016):
    - add: 8 LFOs: hidden by default, until LFO4 is used, then you will see LFO5 appear, etc.
    - add: drag and drop support for Noise Oscillator: the noise file will embed in the preset/song in these situations.
    .. You will notice the background get a blue tint, this is to indicate the noise file is embedded in the preset/song.
    .. You can advance < > noises in the respective folder once a first sound is dragged in.
    - add: noise files when load without fine tune when pitch track is enabled (sample rate is recognized / thus no pitch offset)
    .. so the Noise fine tune shouldn’t be needed if your source sample is in tune.
    - add: Alt-click on “MOD” column entires in the Matrix to toggle between (normal / active modulation) and Bypassed
    ..(saves a menu selection to audition bypasses)
    improved: Noise Fine control modulation depth ‘arc’ more accessible (was overlapping with the control’s up/down arrows)
    improved: typeable values for noise osc in key track mode follow display
    - add: Option (preference) for Noises to be embedded in presets. This isn’t recommend to enable, as you’ll be bloating your project files:
    ..It’s the 13th brackets entry in the Serum.cfg file. If you delete the Serum.cfg file it will list it as such “Embed non-factory noises inside presets (warning: larger presets / songs!)” this is intended currently for soundware developers and isn’t recommend to enable for local use (you’ll end up with larger songs and presets when using custom noises).
    - add: Serum Preset Browser now has additional 4th column choice: “Comment”, for personal comments in browser.
    - add: Serum Preset Browser now saves the last selected 4th column choice / opening new instances will default to this column choice.
    OS X: Serial number no longer prompted when keeping Serum Presets on an external HD and sharing between machines.
    - fix: for Velocity or Note graph controlling Noise Phase (noise sample start)
    1.10b3 changes
    - “render OSC Warp” could lead to crash in some situations - loading old presets/projects wouldn’t open in some situations in 1.10b2 - preference for make double-click to reset controls instead of ctrl-click/cmd
    1.10b2
    - fix: on Windows, dragging Note or Velo modulator across the LFO or Velo/note graphs could lead to a crash in some situations. - fix: PNG to WT import was offset by 1 pixel (empty row at bottom of image, missing top row of image). - fix: compressor knobs (when set to Limiter) latency reporting was causing glitching issue in Cubase as latency updated repeatedly (please note, compressor attack time will still do this, as attack time alters the needed lookahead for the limiter, thus the latency needs to adjust). Automation parameters are no longer sent on preset change, this greatly accelerates preset load times in some hosts (e.g. FL Studio)
    1.10b1
    - add: PNG (image) to WT import -> drag PNG to WT, it load PNG, stretches to internal 2048x256 size, maps luminance to WT amplitudes.
    - add: preference for preventing MouseWheel to change controls (knobs/number boxes/switches/etc).
    - add: alt-click on Matrix mod source (and Aux source) menus: batch re-assign all entries w/ same source to the new selection.
    - fix: ModWheel->WT pos preference was not saving
    - fix: clearing note / velo graph (using context menu) wasn’t visually updating immediately
    - fix: selecting FX rack presets for Filter were not updating the Filter type label immediately
    - fix: delay FX module would on occasion create audio clicks (when setting/modulating delay time)..
    - fix: Remove DC Offset in WT Editor wasn’t functioning correct (only partial DC elimination + potential clipping).
    - fix: right-click to reset an env curve wasn’t working correctly (it visually would update, but it wasn’t updating in DSP)
    - fix: mod source menus had checkmark set wrong in some cases
    - fix: adjusting polyphony limit while a new note is triggered could lead to a crash
    - fix: presets which were not accessible due to permissions could cause a crash on database scan
    1.09b9
    reduced memory footprint by ~60 megabytes per instance fix: “Silence effect tails when host transport stops” preference now functions on Hall reverb mode fix: mouseover tooltip names now display correctly on hall reverb size/spin/spin depth
    1.09b8 (Windows Only)
    1.09b7
    Unison phase memory (setting phase knob to 100%) no longer drifts on successive notes/ this phase-lock saves in preset/song.
    E.g. Enable unison, turn unison detune to 0, successive notes will sound different due to rand knob.
    When you hear one you like, move phase knob at 100%, now the oscillator phases (resulting tone) will be locked consistent.
    - fix: improved voice stealing / no more “rude” polyphony clicks are gone when voice cap is hit
    - fix: [Reaper 32-bit] situation where operating the UI could cause playing notes to stop reacting to automation.
    - fix: (OS X) on some systems, the installer would not complete in 1.09x
    - fix: (Windows 7) potential fix for drag-and-drop macros on causing crashes in 1.09b5/b6
    1.09b6
    - fix: saving a remap/waveshape shape file was leading to a crash new defaults for the reverb FX (hall settings).
    1.09b5
    - add: Second reverb algorithm: Hall Module Locking (Osc A, B, Noise, Sub, Filter module, right-click on the name/power button to see menu item), locks the controls/tables so you can change presets and keep the old settings presets for individual effect modules.
    - add:clicking an FX tile on left side of FX page will scroll the FX rack to reveal that FX module (assuming the FX is enabled)
    - add: MIDI CC / Learn support for OSC A, B, Noise, Sub, Filter module power buttons
    - add: some Preset and project loading time improvements
    - fix: typeable values on filter cutoff (Hz) was applying the wrong amount slightly.
    - fix: chaos modulators would stop functioning if S&H was disengaged with an active note
    - fix: (non S&H chaos modulators) were not functioning correctly in polyphonic situations fix: (SerumFX) re-opening projects causing an instant crash in some hosts (if LFO + Note Latch were assigned)
    1.09b4
    - updated installer for OS X (script to force-remove older versions)
    1.09b3
    - using older compiler revision due to issue on older MacOS machines running 64-bit
    1.09b2
    - code merge/update to match SerumFX
    1.08b6
    - fix: modulating pitch (or mono mode) on a tiny noise sample (< 1k) set to one-shot mode could lead to a crash
    - new: Lock FX Rack - when enabled, the current FX chain/settings will not change when you load new presets.
    This option can be found in the main menu (“Menu”) as well as if you right-click on the FX Enable tiles on the left side of the FX panel.
    - new: Load/Save Effect Chains. Allows you to load/save the current effect rack. Accessible in the same as above locations.
    Although the location of these files does not matter, a folder named “Effect Chains” should get created in the Serum Presets folder and be the default directory for the load/save dialogs. If it does not get created, you can create it yourself (without quotes).
    1.08b5 changes:
    - fix: closing the plugin window with both the FX tab selected and preset browser showing could lead to a crash.
    - fix: all notes are shut off when adjusting polyphony now to prevent possibility of a crash.
    - fix: potential fix for Master Tuning host automation parameter not functioning in some situations
    - fix: Poly Legato fix/reworking to handle simultaneous note on messages
    1.08b2 changes:
    - fix: in v1.081 some params such as unison detune range were not getting default values set on INIT preset which could lead to improper sound or a crash in some situations.
    - fix: Poly legato mode (legato on, poly off) was not sounding legato in some situations (most recent note stopping before new note).
    fix: Velo/Note graph legato mode option (ctrl-clicking on their mod sources when assigned for the option) was not sounding in some voice stealing situations.
    1.08b1
    preliminary parameter locking feature, right-click menu option on controls to “lock them” (to prevent change on preset load). underlying changes for SerumFX version (ready soon, no ETA date). some OS X fixes (crash protection)
    1.07b9a fixes voice stealing where new notes weren't getting created at all when polyphony was exceeding maximum voices set in POLY.
    1.07b8 fixed a potential crash, caused by new notes getting triggered during processing (e.g. Wavetable or preset load).
    1.07b7 (OSX) updated compiler to more recent SDK (compatibility with older OS versions is NOT tested at the moment, 1.07b3 is uploaded as a secondary option, but feedback to me is greatly appreciated (even if things seem OK) via contact formå.
    1.07b6 (OSX) attempts to fix an issue in 64-bit hosts (namespace collision?)
    1.07b5 is 1.07b4 but version # updated to avoid confusion with short-lived 1.07b4.
    1.07b4 (November 2015):
    - fix: for selecting “init preset” while notes are playing
    - fix: for chaos oscillators resetting the chaos algorithm when no notes were playing
    - fix: for using variables q and z together in a formula in the WT editor could lead to NaN output.
    - fix: dragging NOTE and VELO mod-source tiles on Windows could lead to a crash
    - fix: Filter cutoff Hz (numeric value display) was incorrect in some situations.
    - fix: Drag and Drop import in Ableton Live OS X 64-bit could appear “stuck” or crash
    - fix: WT Editor, it was possible to draw on a different table than visually selected
    - fix: extremely large sample sizes in WT formula editor were displaying improper text for note name.
    - add: support for drag-and-drop to wavetable (import for audio files) from Cubase Media Bay
     
    Last edited: Dec 3, 2020
    • Like Like x 3
    • Interesting Interesting x 1
    • List
  2.  
  3. mild pump milk

    mild pump milk Russian Milk Drunkard

    Joined:
    Mar 29, 2014
    Messages:
    2,683
    Likes Received:
    2,262
    Location:
    Russia
    Usually their updates are 1 or 2 additions, few improvements and lots of fixes. These all are per 10 or 15 versions. Mostly are fixes.
     
    • Like Like x 1
    • Useful Useful x 1
    • List
  4. mark@WFstudios

    mark@WFstudios Member

    Joined:
    Oct 23, 2012
    Messages:
    163
    Likes Received:
    15
    On the website for some reason the changes are only shown in the release notes of the "update" and not the "installer".


    1.30b7 (August 21 2020)
    fix: AudioUnit automation was reloading incorrect parameters in Logic in some situations


    1.30b6 (August 1 2020)
    Add: (SerumFX) Presets Saved by SerumFX with oscillators enabled will reload with oscillators enabled
    Add: Sort Random in WT Editor Sort menu
    Add: Envelope zoom lock now persists plugin window being closed
    Add: Smoothing to the FX Level trims
    Fix: Small memory leak when saving wavetables
    Fix: (windows) Skin with missing resources (default images) could end up with those missing resources at wrong size
    Fix: Shift-click for fine tuning on FFT bars was jumping value
    Fix: Scaling bug on wavetable import.
    Fix: Issue on song/preset reload in 1.304 in Logic X which appeared most commonly with Kontakt or other memory-intensive plug-ins


    1.30b5:
    Add: (SerumFX) Presets Saved by SerumFX with oscillators enabled will reload with oscillators enabled
    Add: Sort Random in WT Editor Sort menu
    Add: Envelope zoom lock now persists plugin window being closed
    Add: Smoothing to the FX Level trims
    Fix: Small memory leak when saving wavetables
    Fix: (windows) Skin with missing resources (default images) could end up with those missing resources at wrong size
    Fix: Shift-click for fine tuning on FFT bars was jumping value
    Fix: Scaling bug on wavetable import.
    Fix: Issue on song/preset reload in 1.304 in Logic X which appeared most commonly with Kontakt or other memory-intensive plug-ins


    1.30b4 (June 7 2020)
    Fix: for new drag to matrix mod source menus feature disabling audio
    Fix: for drag import in Cubase (Media Bay XML format)
    Fix: drag-adjustment indicators between the OSC A/B parameters in Advanced unison settings on Global were adjusting the wrong controls.
    Fix: “legato (portamento time)” feature for NOTE and VELO modulator sources would continue follow portamento even when this option was disabled.
    Fix: LFO curve scaling - if set 100% negative (e.g. high point curving steep with 100% curve depth) was not extreme enough in audio
    Add: (Logic) Wav render export now exports 24-bit when running in Logic.
    Add: (Logic) support for drag-import from the Project folder in Logic’s browser (previously only the Files/media browser was supported)
    Add: "Send to Noise Oscillator" in the WT Editor->Single menu
    Add: drag LFO to noise osc for a single-cycle waveform render to noise osc


    1.30b3 (May 30 2020)
    Add: Shift-drag on the render export in top-left will drag the current preset .fxp file out (note: the drag is a file reference to the saved preset on disk, i.e. not re-saved with Serum’s current state if different)
    Add: Wav render export now includes preset name used in the wav filename
    Add: Comma accepted as a decimal indicator for type-able values
    Add: Drag mod sources to menus in matrix
    Add: realtime FFT updates in WT Editor - the Wave to FFT button in the editor is somewhat obsolete (is now an on/off switch which you should be able to leave enabled), the FFT bars will update in realtime as you adjust the selected wavetable frame in the WT Editor.
    Fix: Additional cosmetic fixes to zoom scaling
    Fix: hang/crash when DAW transport is active + new notes are triggered in versions 1.301 and 1.302
    Fix: Preset Browser content filters were clearing if assigning of a custom tag


    1.30b2 (May 28 2020)
    Fix: Spectral blur in WT Editor->Process was blurring incorrect
    Fix: Removing LFO Point modulation on LFO points was causing point to also clear in some situations.
    Fix: “Flip Horizontal” on LFO right-click menu was offsetting curve modulations on the remapping of the point modulation assignments.
    Fix: LFO playback on DAW transport cycle could yield LFO timing for held notes
    Fix: updated Mix/Level switches for Promethium and Default skins
    Fix: pop-up menu crash if multiple LFO busses unassigned in sequence of used busses + mutli-selection made
    Fix: crash in extreme case of modulating LFO points
    Fix: .fxp was visibly added to preset name after saving preset
    Fix: prevention from accepting negative values on additional controls
    Fix: in version 1.298-1.301, LFO sync could go off time on transport loopback or play start if notes held during this transition
    Fix: in prior 1.302, Spectral blur on bins wasn’t mixing in source table harmonics
    Fix: Spectral blur bins+phases (adjacent frames) improvement
    Fix: some incorrect mouseover help items
    Add: Spectral blur for adjacent 'frames' in WT Editor Process menu - blurs the content of each harmonic with neighboring wavetable frames, using X-Axis grid size for depth into the neighboring fames
    Fix: Some on-screen help tooltips were displaying the wrong tip information
     
    • Like Like x 3
    • Winner Winner x 1
    • Useful Useful x 1
    • List
  5. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
  6. mild pump milk

    mild pump milk Russian Milk Drunkard

    Joined:
    Mar 29, 2014
    Messages:
    2,683
    Likes Received:
    2,262
    Location:
    Russia
    1.30b6 = 1.30b5?
     
  7. Pistascho

    Pistascho Member

    Joined:
    Jan 3, 2014
    Messages:
    61
    Likes Received:
    9
    Does anyone get the "Please purchase" message and renders the plugin useless?
    How to avoid this?
     
  8. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
    well spotted :dunno:
     
  9. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
    your serial is blacklisted
     
  10. mark@WFstudios

    mark@WFstudios Member

    Joined:
    Oct 23, 2012
    Messages:
    163
    Likes Received:
    15
    The v1.30b6 release notes for Windows has a empty log, so I just copied the MAC release notes from v1.30b6 onward. For some unknown reason the MAC v1.30b6 release notes log states the same changes as in the Windows v1.30b5 release notes, as you have pointed out.

    Just to be clear the current Windows version is v1.30b6 and current MAC version v1.30b7.

    Feel free to dig through the Xfer Records forums to try and discover the correction to the mis-match https://xferrecords.com/forums/serum
     
  11. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
    Thanks again Mark, :like:

    Reviving this thread, as there are new mysteries to unfold

    BETA 6 (might be correct changelog now), BETA 7 & BETA 8 are missing and id love to know what was changed!
     
  12. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
    MISSING:
    nothing
     
    Last edited: Dec 3, 2020
  13. D-Music

    D-Music Rock Star

    Joined:
    Apr 21, 2014
    Messages:
    597
    Likes Received:
    307
    Location:
    Netherlands
     
  14. Demloc

    Demloc Platinum Record

    Joined:
    Mar 10, 2020
    Messages:
    215
    Likes Received:
    180
    1.30b8 (October 14 2020)

    fix: dB display values could display invalid text in some situations, potentially leading to a crash

    1.30b7 (August 21 2020)

    fix: AudioUnit automation was reloading incorrect parameters in Logic in some situations

    1.30b6 (August 1 2020)

    Add: (SerumFX) Presets Saved by SerumFX with oscillators enabled will reload with oscillators enabled

    Add: Sort Random in WT Editor Sort menu

    Add: Envelope zoom lock now persists plugin window being closed

    Add: Smoothing to the FX Level trims

    Fix: Small memory leak when saving wavetables

    Fix: (windows) Skin with missing resources (default images) could end up with those missing resources at wrong size

    Fix: Shift-click for fine tuning on FFT bars was jumping value

    Fix: Scaling bug on wavetable import.

    Fix: Issue on song/preset reload in 1.304 in Logic X which appeared most commonly with Kontakt or other memory-intensive plug-ins
     
  15. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
    thanks guys, this is still weird though

    I think its MAC entries that are left out of the win changelog
     
    Last edited: Dec 3, 2020
  16. Illadelph

    Illadelph Producer

    Joined:
    Aug 31, 2020
    Messages:
    340
    Likes Received:
    117
    Thanks to @NU DISCO for the extra bit of early additional changes
     
  17. tr3v0r94

    tr3v0r94 Kapellmeister

    Joined:
    Oct 27, 2019
    Messages:
    60
    Likes Received:
    45
    I hear Serum 2 is coming?
     
    • Interesting Interesting x 1
    • List
  18. HeresJohnny

    HeresJohnny Ultrasonic

    Joined:
    Mar 1, 2021
    Messages:
    56
    Likes Received:
    23
    Does anyone know what happened between v1.30b9 v1.33b4?
     
  19. mark@WFstudios

    mark@WFstudios Member

    Joined:
    Oct 23, 2012
    Messages:
    163
    Likes Received:
    15
    1.33b4 (March 12 2021)
    fix: default noise file would not sound on init startup (new Serum instances) in some situations
    fix: bipolar modulators on text controls could appear as clipped (red blip visible) when not out of range
    fix: text font scaling on preferences
    add: clicking on overlapping LFO points on the right edge will now select the left one

    1.33b3 (March 6 2021)
    fix: FX level trims (clicking on "Mix" so it displays "Level" on FX panels) were not working in previous 1.33b versions

    1.33b2 (March 5 2021)
    fix: having a default Serum preset (User/default.fxp) could lead to a crash when the plugin was scanned by the DAW
    fix: on macOS when running 1.331 installer, older SerumFX versions would get removed from the plug-ins folders
    fix: on macOS with a non-retina display, resizing the plugin window could lead to visual corruption or potentially crash in 1.33b1

    1.33b1 (March 4 2021)
    add: deleting presets in the preset browser no longer rescans the database
    fix: presets ratings and categories could not be assigned on some systems in 1.32b9

    1.32b9 (March 2 2021)
    fix: in the recent 1.32x updates, wavetables loaded from the WT menus could appear as imported (no visible name in menu bar).

    1.32b8 (March 1 2021)
    fix: preset hybridize feature could produce an erroneous error message in previous 1.32x versions
    fix: in previous 1.32x versions, the preset database could rescan on plugin start when it was not needed

    1.32b7 (March 1 2021)
    fix: preset hybridize feature could produce an erroneous error message in previous 1.32x versions

    1.32b6 (February 28 2021)
    fix: code sync with macOS
    fix: in 1.325 Windows, Noise oscillator samples would not menu-advance after load

    1.32b5 (February 25 2021)
    new: improved directory scan times
    new: graphics redraw improvements
    fix: Distortion "Downsample" FX could sound slightly different in 1.32x versions, in some situations

    1.32b2 (February 4 2021)
    fix: windowing fixes, mostly affecting Cubase in rare situations
    fix: (macOS) re-introduced support for legacy macOS 10.9 thru 10.11
    fix: (macOS) re-introduced support for legacy ProTools 11 thru 12.5

    1.32b0 (January 30 2021)
    fix: version 1.31b9 would display incorrect in some hosts first window open, when a default zoom size was set
    add: MIDI note name is now added to the end of the filename on drag-exported WAV files

    1.31b9 (January 25 2021)
    fix: in 1.313-1.31b8, white window was displayed in Cubase on first plug-in open, if a zoom default was set
    add: installers remember user plugin choices to install, AAX is unchecked by default

    1.31b8 (January 25 2021)
    fix: SkinCache wasn't being utilized in all situations - having a scaled zoom size set should open faster now in any DAW.
    fix: more changes for unicode support

    1.31b7 (January 23 2021)
    fix: using the new "WT to LFO" feature from LFO Shape menu could get inadvertently actioned via loading FX presets.

    1.31b6 (January 23 2021)
    fix: associated displays were not always re-drawing immediately when using < > advance arrows

    1.31b5 (January 22 2021)
    fix: installers would not always run if launched from a path containing unicode

    1.31b3 (January 18 2021)
    add: macOS ARM (M1) native
    add: “Wavetable to LFO Shape" in the LFO Shape load menu (folder icon), takes the current WT frame source table and converts to spline points (LFO Shape).
    fix: Improvements to preset loading
    fix: Improvements to graphics redraw
    fix: changing a parameter's mod depth was halting automation for that parameter in Bitwig
    fix: cc64 was only responding on MIDI CH1
    fix: for unicode in folder/file names on Windows

    1.30b9 (November 11 2020)
    Add: phases in the DSP state of modulation effect modules (Hyper, Flanger, Phaser, Chorus) save and recall, for use with 0 Hz on rate knob
    Fix: (AAX) All Notes Off issue in ProTools could lead to stuck notes
    Fix: Dragging a mod source to OSC A/B Coarse Pitch, when > 16 mod assignments were already used, could momentarily alter another synth parameter.
     
    • Like Like x 2
    • Love it! Love it! x 1
    • List
  20. HeresJohnny

    HeresJohnny Ultrasonic

    Joined:
    Mar 1, 2021
    Messages:
    56
    Likes Received:
    23
    cheers mate @mark@WFstudios
    Hope WFstudios is rocking!:mates:

    Some minor graphics & preset improvements & fixes, Mac M1 stuff.. Not that exciting tbh
     
  21. Howard Carpendale

    Howard Carpendale Platinum Record

    Joined:
    Feb 2, 2021
    Messages:
    594
    Likes Received:
    247
    Location:
    .de
Loading...
Similar Threads - [Xfer Serum] Changelog Forum Date
|SERUM] No all presets showing Software Mar 27, 2020
Loading...