somehave problems to get it working some not...
i got it not working...got chipset driver usb3 driver but no bios XHCI hand-off option to enable disable
have somebody experience with that ?

 

..

 

Last edited: Dec 5, 2018

the usb3 driver has to fit to youre chipset

 

..

 

Last edited: Dec 5, 2018

Which is your mother board?
Are you using win7 x64 or win7 sp1 x64?

I'm using usb3 under win7sp1x64 without any problems.

 

Yes, that happens sometimes unfortunately.
You have to slipstream USB3 drivers into the Win7 installation disk (I assume you have troubles installing). It's not a super complicated procedure, but some skills are required.
NTLite: https://www.ntlite.com/

And F6 drivers for your mobo

 

????
I have installed two USB3 Cards on my old Internet PC and on my DAW there are original MOBO ones....Everything is working well. On the first one sometimes I have problems about exceeding power supply to the ports, and sometime (rarely) they are only recognized as USB2. The chipset is important, Nec ones are really better

 

i had a shitload of trouble when i reinstalled win10 to bootcamp, win7 install doesnt have native usb3 drivers, i did read something about not using a usb3 stick (something about usb2 in a usb3 port should work) but i'm pretty sure it didnt help shit. my mistake was not using the bootcamp installer in osx, somehow osx activated the usb3 in the win7 install. the other option would have been to slipstream the drivers like andrew said with ntlite

 

Have you tried using TeamOS' latest Windows 7 with USB3 drivers slipstreamed in it? They update it regularly about every month, even the May 2018 one should work.

 

I have one of the first MBs with usb3, i need to manually install renesas usb3 drivers every time to make it work properly, and it still has powering issues so I only use them for mouse and midi controller, soundcard too risky

 

thx a lot for replys..

i got a new set of drivers extra for my acer predator g5910 i7 2600... i try out now...

yea ntlite...i feared it was just traing last time...



here is method to wrap (i blv lol)

https://forums.overclockers.co.uk/threads/guide-installing-windows-7-on-a-kaby-lake-pc.18779614/

btw..dont install this updates on win 7


KB2882822 - Update adds ITraceRelogger interface support
KB2952664 - Compatibility update for keeping Windows up-to-date in Windows 7. Adds telemetry
KB3021917 - Update to Windows 7 SP1 for performance improvements. Adds telemetry
KB3068708 - Update for customer experience and diagnostic telemetry
KB3080149 - Update for customer experience and diagnostic telemetry
KB3184143 - Remove software related to the Windows 10 free upgrade offer
KB3185330 - October 2016 Security & Quality Rollup
KB3188740 - November 2016 Security & Quality Rollup for .NET Framework 3.5.1
KB3192403 - October 2016 Preview Of Monthly Quality Rollup
KB3196686 - November 2016 .NET Framework Preview Of Monthly Quality Rollup
KB3197869 - November Preview Of Monthly Quality Rollup
KB3197868 - November 2016 Security & Quality Rollup
KB3205402 - December 2016 Security & Quality Rollup for .NET Framework 3.5.1 & 4.6.2
KB3207752 – December 2016 Security & Quality Rollup
INTEL SYSTEM - Absolutely no info. Dodgy update from Microsoft. May contain telemetry
INTEL USB - Absolutely no info. Dodgy update from Microsoft. May contain telemetry

 

sinwave can you drop name of the tm os rls...i guess its not Windows 7 Luxury Edition V.3 X86x64 2015
-----
i got sp1 ultimate x64 olymoon....
-------------------------
i think to remember enterprise or ultimate have no benefit over win7pro for audio users btw

 

Last edited: Dec 5, 2018

i hope it work but when not ntlite i comin.......or even not....i dunno yet..
usb3 is just for fast data transfer not lateny or so...
i have read audio gear uses usb2 anyway....

 

idk what slipstream means, but I'm kinda guessing this is why my Push 2 display never fully worked until after I upgraded to Windows 10. All my USB ports were USB3 and Push 2 didn't seem to recognize that there was enough bandwidth available for the waveform and meter displays. Ableton support had basically nothing to offer except "try switching to Windows 10" which made me super pissed at the time. Even Win 10 didn't work until I reinstalled the USB drivers on disc that came with my mobo

Anyway, I don't mean to derail this thread. Just a light bulb went on when I read your comment

 

but wait...push use usb3 ?

 

Push 2 use usb 2

 

If you want to go deep with push 2 -> https://github.com/Ableton/push-interface

 

Just go to TeamOS' website, press "torrents", press "Windows 7" on the left and look for any "
Windows 7 Ultimate Sp1 X64 En-us xxxxxxx (usb3.0) Pre-activated=-team Os=-" These have USB3 drivers in them. I would probably download the latest release now, especially if using NVMe SSD as there were some updates related to NVMe lately.

edit: yes, Ultimate is actually harder to optimise for audio as it has even more unnecessary garbage in it. Maybe go for one of "more in one" installs and install Windows 7 professional, but make sure they slipstreamed USB3 drivers in it. I'll check for some other installations later. I have no time right now.

 

Last edited: Dec 6, 2018

thx a lot mate....i kno the site...but alien,james bond ,super dupa OS and so on..now i kno what to hunt...

this site makes ntlite spare-able ...i kno..i kno heh heh...but youre win7 lite version would be the best...dont dare to not upload if you ever finaly make one pal...

EDIT when not signed in i couldnt see all entrys thats why thanx again..

 

Last edited: Dec 6, 2018