■ 2017.05.23

All MeldaProduction effects and MPowerSynth have been updated to 11.00, which is an extremely important major update which provides lots of new features, optimizations, fixes and overall improvements. It is recommended to install this update. The update is free as always and you can install it simply by downloading and using the newest installer from our download page.

Major update 11 release notes
Version 11 may not be fully backwards compatible with version 10. The problems should be negligible and here is the list.

Plugin renaming
There should be no problems with most hosts, but some of the plugins have been renamed, and it's the host's responsibility to switch to the new plugin names. If your host fails to do that, try letting it rescan the plugins and restart it. It that won't help and your older projects won't load properly, please inform both us and your host developer. In these cases you can also keep version 10 installed along with version 11. Following name changes have been made:

• MLimiter -> MSaturator
• MDynamicsLimiter -> MLimiterX
• MEqualizerLinearPhase -> MEqualizerLP
• MAutoEqualizerLinearPhase -> MAutoEqualizerLP
• MMultiBand*** -> M***MB (for example, MMultiBandAutopan -> MAutopanMB)

Bundles have been renamed as well, to make the name reflect that the bundles contain effect only:

• MTotalBundle -> MTotalFXBundle
• MCreativeBundle -> MCreativeFXBundle
• MMasteringBundle -> MMasteringFXBundle
• MMixingBundler -> MMixingFXBundle
• MFreeEffectsBundle -> MFreeFXBundle

All licences have been upgraded in your accounts of course.

Automation
Version 11 comes up with fully restructuralized automation parameter system, which should improve performance and compatibility with problematic hosts. If you have been using automation in your older projects, please go to Settings in any of the plugins and enable Automation compatibility mode for V10. Then restart your host and your projects should load without problems. For future's sake it is recommended to have this option disabled however.

Parameter ranges
We also decided to extend range of a few parameters. The settings will load without problems, but if you have been modulating/automating them, you will need to readjust the range. We are sorry for the inconvenience.

• MSaturatorMB had a Ceiling parameter ranging from -24dB to 0dB, which was replaced by Output gain ranging from -24dB to +24dB.
• MDelayMB maximum delay has been extended from 500ms to 10 seconds.

Source
MeldaProduction

 

Last edited: May 23, 2017

Meldaproduction MTotalFXBundle 11.00:

List of changes since 10.07

• Released MTurboReverb.
• Upgraded styles and added several new ones, plus many GUI improvements.
• Upgraded/added active presets on most plugins with easy screens.
• Added 2 powerful crossover modes - Spectrum and Tonal/Transient - to all multiband plugins and MXXX Crossover module.
• Added multiparameter editor mode "Button (label next to it)"
• Added multiselection to all parametric equalizers and comb filters. Use Shift + Click on a point to manage the selected points.
• Maximum number of multiparameter banks increased to 128.
• MIDI follow settings in MWobbler do not hide when you click elsewhere anymore.
• Changes to active preset GUI are now applied immediately when multiparameter settings are changed, which makes GUI design considerable easier.
• Gain reduction meters now do not go under -40dB, so they are more responsive for gates.
• Added A/B feature to MAutoAlign, which lets you quickly switch between 2 different analyses.
• Added No attenuation gate mode to MAutoVolume.
• Added samplerate Reducer feature to MDistortionMB.
• Added Delay feature to MDrumEnhancer.
• Added title logo.
• Added Enable crossfading option to all signal generators.
• Added Bars start horizontal GUI mode to multiparameters, plus both bars now show units, follow colors & enabled and show label option.
• Changed looks of all meters.
• Plugins now retain multiparameter values when browsing active presets (not stored with the project however).
• Value in meters now shows temporary default for most meters (which corresponds to the peak value) and provide a switch via context menu to show global maximum (default for peak meters).
• Global meters can now be partially collapsed, so that only relevant meters can be displayed.
• Added "Allow default colors by plugin type" option to global settings, that disables default color configuration by plugin type.
• Added "Allow style changes if too big" option to global settings, which disables the default adaptive styling capabilities engaged if a plugin doesn't fit the screen, trying to make it small enough.
• Double-clicking title of the plugin window (and any other nonmaximizable windows) makes the window as small as possible.
• Added number buttons to band settings of all parametric equalizers, which lets you switch between bands quickly.
• Ctrl+Alt+click on a control on the easy screen shows the multiparameter settings.
• Added Quick learn to popup menu for multiparameters, which lets you quickly attach it to a single parameter, including copying its name.
• Synchronization switch in modulators can now be automated/modulated.
• Stepped/continuous switch on active presets now defaults to stepped in all plugins.
• Edit menu / Cut now copies the selected text to the clipboard before deleting it.
• Order in band settings in parametric equalizers renamed to Slope.
• Changing HDPI resolution now keeps the editor size visually intact.
• Time graph buttons in meters are displayed only in time graph mode now.
• Crossover mode is now available via multiparameters/modulators for all multiband plugins.
• Added Backup presets feature, available from all Preset windows.
• Time graphs now show line under the cursor, which could help reading units.
• When Areas in parametric equalizers were thin enough, the text was wrapped to multiple lines making it not readable well.
• Showing the easy screen meters in popup now brings the plugin window size to minimum to save space.
• Added side-chain gain to MDynamics and MDynamicsMB.
• Modulator editor slightly optimized for knobs mode.
• Map is now accessible from multiparameter, modulator and MIDI settings windows.
• Double-clicking a tab with enable button toggles the enable state.
• Multiparameters, Modulators, MIDI and Lock now all resolve multiparameter names in their editors.
• Plugins now store the splitter state between the left and right parts of the GUI.
• Added Resizable Y switch to all multiparameters, which lets you build active presets with groups equally high even if the contents of them are not.
• Added "ALC on main input" and "Restart on switch" options to MCompare (including MXXX).
• Added Post-gain and Final gain to MTurboComp.
• Added "Set names by values" feature to multiparameters in banks mode.
• Holding Ctrl while dragging a bar in any bargraph (e.g. oscillator harmonics or step sequencers) provides fine-tuning locked to the single bar.
• Shift + click on a bar graph on an easy screen now provides a text input.
• Easy screen, which doesn't have any controls, no longer contains info text about multiparameters and all space is reserved for meters instead.
• Time graph guides are now stored with time graph setting presets.
• MIDI note controller Shift can now be modulated and automated (via a multiparameter).
• MBassador (including MXXX) improved to avoid zipper noise when changing Level and Wet parameters.
• Labels, checkboxes and title buttons are now not displayed upper-case even if the upper-case switch for current style is enabled, to provide more clarity.
• Band mute & bypass are now available for modulation in multiband plugins.
• Plugins now automatically lower the style size on HDPI/Retina displays when opened for the first time.
• Added areas to MAnalyzer.
• MDynamicsMB and MLimiterMB band meters now display text value for gain reduction instead of peak level, it can be reverted using right-click menu.
• Added 'Swap source and target' feature to MAutoEqualizer and MAutoDynamicEq (including MXXX).
• Selectors, switchers and checkboxes in active presets can now show a simplified HTML as bank names when the name starts with '~'.
• Fix: Randomizing graph from the popup menu could place points outside of the vertical range.
• Fix: Custom meters on the easy screen could have incorrect order.
• Fix: Bar graphs on easy screen were not correctly detecting size.
• Fix: Plugins could change when rendering with specific offline settings and some further circumstances occured.
• Fix: Downwards expander in MDynamics, MSpectralDynamics and MDynamicsMB could increase levels near silence if range close to minimum was used.
• Fix: When changing styles the colors might have not been loaded properly.
• Fix: MCompressor (including MXXX) sidechain audition wasn't functioning properly.
• Fix: Multiband plugins could crash in rare situations when changing crossovers.
• Fix: Analyzer in Equalizer EQ couldn't be turned off in MXXX and MAutoEqualizer.
• Fix: Attaching Attack/Release of MDynamicEq or MAutoDynamicEq (including MXXX) to a multiparameter would show Auto as 0ms.
• Fix: Changing bank mode data for multiparameters often didn't update the easy screen.
• Fix: Help windows might have been incorrectly sized on HDPI screens.
• Fix: Low output gain in MSaturator in Side mode and higher upsampling could cause clipping of the Mid channel.
• Fix: Randomizing multiparameter banks could sometimes mess up contents of modulator windows if displayed.
• Fix: Diff feature wasn't working properly in some channel modes.
• Fix: Due to low-accuracy of ProTools automation switching between settings (or possibly other operations) could make MAutoDynamicEq and MDynamicEq CPU consumption significantly higher than needed.
• Fix: Using VST with another interface at the same time would cause VST to report surround capabilities even if the surround hasn't been activated, which caused problems with some hosts (FL Studio).
• Fix: Clicking Areas / Presets in MMultiAnalyzer (including MXXX) didn't do anything.
• Fix: Text input for modulators/multiparameters controlling other multiparameters might have not worked.

 

Much easier on the eyes.

 

MPowerSynth 11.00 (why changelog is separately posted - because changes for separate synth may differ slightly from bundle, but in common they are almost similar)

• Added TurboReverb FX.
• Upgraded styles and added several new ones, plus many GUI improvements.
• Added 2 powerful crossover modes - Spectrum and Tonal/Transient - to the Crossover module.
• Gain reduction meters now do not go under -40dB, so they are more responsive for gates.
• Added multiselection to all parametric equalizers and comb filters. Use Shift + Click on a point to manage the selected points.
• Added title logo.
• Added "Enable crossfading" option to all signal generators.
• Added samplerate Reducer feature to Distortion FX.
• Added Delay feature to DrumEnhancer FX.
• Changed looks of all meters.
• Value in meters now shows temporary default for most meters (which corresponds to the peak value) and provide a switch via context menu to show global maximum (default for peak meters).
• Added "Allow default colors by plugin type" option to global settings, that disables default color configuration by plugin type.
• Added "Allow style changes if too big" option to global settings, which disables the default adaptive styling capabilities engaged if a plugin doesn't fit the screen, trying to make it small enough.
• Double-clicking title of the plugin window (and any other nonmaximizable windows) makes the window as small as possible.
• Added number buttons to band settings of all parametric equalizers, which lets you switch between bands quickly.
• Added Quick learn to popup menu for multiparameters, which lets you quickly attach it to a single parameter, including copying its name.
• Synchronization switch in modulators can now be automated/modulated.
• Added No attenuation gate mode to AutoVolume FX.
• Edit menu / Cut now copies the selected text to the clipboard before deleting it.
• Order in band settings in parametric equalizers renamed to Slope.
• Changing HDPI resolution now keeps the editor size visually intact.
• Time graph buttons in meters are displayed only in time graph mode now.
• Added Backup presets feature, available from all Preset windows.
• Time graphs now show line under the cursor, which could help reading units.
• When Areas in parametric equalizers were thin enough, the text was wrapped to multiple lines making it not readable well.
• Added side-chain gain to Dynamics FX.
• Trial length has been shortened to 15 days, the same value as all our software.
• Modulator editor slightly optimized for knobs mode.
• Map is now accessible from multiparameter, modulator and MIDI settings windows.
• Double-clicking a tab with enable button toggles the enable state.
• Multiparameters, Modulators, MIDI and Lock now all resolve multiparameter names in their editors.
• Plugins now store the splitter state between the left and right parts of the GUI.
• Holding Ctrl while dragging a bar in any bargraph (e.g. oscillator harmonics or step sequencers) provides fine-tuning locked to the single bar.
• Time graph guides are now stored with time graph setting presets.
• MIDI note controller Shift can now be modulated and automated (via a multiparameter).
• MBassador FX improved to avoid zipper noise when changing Level and Wet parameters.
• Labels, checkboxes and title buttons are now not displayed upper-case even if the upper-case switch for current style is enabled, to provide more clarity.
• Plugins now automatically lower the style size on HDPI/Retina displays when opened for the first time.
• Added areas to Analyzer FX.
• Fix: Randomizing graph from the popup menu could place points outside of the vertical range.
• Fix: Plugins could change when rendering with specific offline settings and some further circumstances occured.
• Fix: Downwards expander in Dynamics FX could increase levels near silence if range close to minimum was used.
• Fix: When changing styles the colors might have not been loaded properly.
• Fix: Compressor FX sidechain audition wasn't functioning properly.
• Fix: Analyzer in Equalizer EQ couldn't be turned off.
• Fix: Help windows might have been incorrectly sized on HDPI screens.
• Fix: Randomizing multiparameter banks could sometimes mess up contents of modulator windows if displayed.
• Fix: Clicking Areas / Presets in MultiAnalyzer FX didn't do anything.
• Fix: Text input for modulators/multiparameters controlling other multiparameters might have not worked.
• Fix: Filter panorama didn't work properly for some filters.

 

Teamwork is better

to @mild pump milk & @Ankit

 

Always like to give some more information, extra opinion, useful hints,tips,tricks) glad 2 help
Teamwork is better, yeah ;)

 

I might give Melda another go. Despite being good plugs covering all kind of grounds with great flexibility I could never deal with their interface, this looks much better.
Thanks for keeping us updated team

 

Yeah
Melda GUI was always just horrible and confuse to work with it, despite that they have really nice plugins.... I'll pass this one, but looking forward to see in V.12 a new GUI redesign

 

■ 2017.07.27

All effects and MPowerSynth have been updated to 11.02, MDrummer to 7.00, MTurboCompMB & MWobblerMB & MFreeformPhase released

We have updated the entire arsenal - effects and MPowerSynth to 11.02, MDrummer to 7.00. This is a big update, which provides many new features, improvements and fixes. It is highly recommended to install this update.

3 new plugins have been released

MTurboCompMB, a multiband version of the MTurboComp, which is included with MTurboComp licence.

​

MWobblerMB, a multiband version of the MWobbler, which is included with MWobbler licence.

​

MFreeformPhase, a powerful utility that lets you adjust the phase of individual frequencies however you like. It is free as a part of the MFreeFXBundle bundle.

​

List of changes
- Effects
- MPowerSynth
- MDrummer

Source
MeldaProduction

 

■ 2017.08.09

All MeldaProduction effects and MPowerSynth updated to 11.03, MDrummer to 7.01

All MeldaProduction effects and MPowerSynth have been updated to 11.03 and MDrummer to 7.01, which comes with several new improvements, features and some fixes. It is recommended to install this update. The update is free as always and you can install it simply by downloading and using the newest installer from our download page.

List of changes
- for effects
- for MPowerSynth
- for MDrummer

Source
MeldaProduction

 

Anyone knows how to make MLimter opens as MSaturator in old projects? FL Studio 12.5.1
I've tried to copy the MSaturator dll file and rename it to MLimiter, didn't work.
Any other ideas?
Thanks!

 

Renaming a dll is useless. The host use dll internal name to link it to the project. You have to use version 10 for sure.

 

All effects and Mpowersynth updated to 11.05 (Also MDrummer was updated to 7.02):

11.05 changes

• Released MAutoStereoFix plugin, a unique stereo signal fixing solution, free for MMixingFXBundle, MTotalFXBundle and MCompleteBundle.
• Added 2 different 6dB/oct crossovers to all multiband plugins, MBassador, MRotary and Crossover module in MXXX.
• Improved colors for single-channel equalization curve in MDynamicEq and MAutoDynamicEq (including MXXX).
• Added Remove resonances feature to MAutoDynamicEq, which sets up the bands according to highest peaks in the analysis.
• Following multiband plugins now resize the crossover editor instead of the band editor, since there is nothing to resize in there: MBitFunMB, MDelayMB, MDistortionMB, MGranularMB, MHarmonizerMB, MLimiterMB, MSaturatorMB, MTransientMB
• MLimiterX active presets initiated showing meters showing momentary loudness instead of short-term one.
• Holding Shift while pressing the Paste button under A-H now allows you to replace all A-H slots with settings from the clipboard.
• Improved MCompare generate source section GUI and added Mute output feature.
• Added Max length parameter to MTurboReverb's ER analyzer (including MXXX).
• Added Note index (on & off) MIDI virtual controllers which react to note number being pressed/released and can be used as controllers, to switch presets etc.
• Added Post-processing section to Signal generator / Advanced, which contains additional scale, offset and wrap transformations.
• Online preset exchange no longer creates subfolders to make things cleaner.
• Fix: MultiParameter/Modulator menu / Reset did reset the entire subsystem, but didn't update the actual editor.
• Fix: MultiParameters on the edit screen didn't have additional text editors (e.g. piano for frequency values) on the edit screen.
• Fix: Adding a parameter to a modulator/multiparameter/midi/learn would initially show no parameters in the root folder and you'd need to click a different folder and back.
• Fix: Playback position in MRhythmizer and MRhythmizerMB (including MXXX) was jumping around current position when playback was disabled and Lazy sync was enabled.
• Fix: Parameter lock when randomizing didn't work in VST3.
• Fix: Waveform display could fill some of the waves despite there was no reason to.
• Fix: Changing latency didn't update latency compensation for channel modes, smart bypass and other advanced subsystems.
• Fix: Time graph settings presets didn't update resolution after loading.
• Fix: Plugins could crash if style resize factor became 0 somehow (it is unclear how that happened).
• Fix: Multiband plugins didn't have presets for individual bands.
• Fix: Importing multiband plugin settings into MXXX didn't work.
• Fix: Trying to display help for a menu didn't work and caused problems, so it is now disabled.
• Fix: Bypassed modules with latency in MXXX didn't perform latency compensation for the bypass.
• Fix: A/B button didn't work if the initial slot was B until a different one was clicked.

11.04 changes

• Added Modern algorithm to MDelayMB (including MXXX and DelayTap in it), which doesn't cause pitch-shifting when the length is changing.
• MAutoAlign now performs an analysis even if there was a bypassed/disabled instance.
• Highly improved installation speed.
• Fix: MFreeformEqualizer and MFreeformPhase (including MXXX) had graph points automatable despite this cannot work. It has been removed.
• Fix: Plugins could crash in certain situations when displaying graphs with time smart units.
• Fix: Knobs were moving 1 pixel up/down along with rotation.
• Fix: MTurboReverb could have Edit screen inaccessible with MCompleteBundle licence.

11.03 changes

• Added Wet HP to MBassador (including MXXX), which should help cleaning up the output from excessive ultra-low-frequency content.
• Added Shuffle feature to MDelayMB (including MXXX).
• Added Modify and Count parameters to Sync for MDelayMB, MGranularMB, MBitfun and MBitfunMB (including MXXX).
• Introduced smart-axis system, which provides "nice" values for various axes different zoom levels.
• Added Transient module to MTurboReverb (including MXXX).
• ConvoNoise module in MTurboReverb (including MXXX) now provides shapeable dampening.
• MLoudnessAnalyzer batch processing now performs multipass analysis for short files, to ensure the loudness estimate is stable and accurate.
• Default settings improved to a new more efficient and reliable method.
• Batch processing WAV files now keeps all custom metadata.
• Equalizers do not display analyzer peaks for both input & output anymore (when Track peaks is enabled), since they are the same and cause blurring.
• Improved unofficial support for Linux via Wine.
• Fix: MCompare didn't work well with "silent files" containing zeroes.
• Fix: PowerSynth would crash MXXX in surround mode.
• Fix: MXXX didn't properly update analyzers of subbands displayed as popups if present in a band not being selected.
• Fix: Crossover FX in MXXX had interchanged Mid/Side and Panorama crossovers.
• Fix: Loudness range meters didn't show a correct text value.
• Fix: Text edit of multiparameter controlling another multiparameter from a subinstance of MXXX didn't do anything.

 

The keygen does not work for me someone please help my computer foes not locate AudioPluginKernel when i search?

 

Patch these kernel files (one is with x64, another without) it is in folder c:/windows, generate license file for bundle, mpowersynth and them into your vst melda folder. And if you need to install only x64, installer intentionally installs x86 - put it in any folder to delete dll after install. Load licenses in daw or with dragndrop on plugins

 

I think, they are actually one of the best plugins in the market.
Fuking great plugins

Unfortunately, i don't like the design, too complicated for my eyes...
That's why i never use them

 

And if you want to search file, don't use standard methods offered by microsoft. It is tooooo loooong. Download free search engine EVERYTHING. Its first launch after install is several seconds up to 2 minutes of scanning (if your system is overloaded totally), and it also works with your external hdd, usb cards...then usage is too fast. Print a filename in a search line and second later you will see all the results without long rerererescanings