Audio interface and clipping

Discussion in 'Soundgear' started by magnaproxy, Sep 4, 2016.

Tags:
  1. magnaproxy

    magnaproxy Newbie

    Joined:
    Jul 10, 2016
    Messages:
    36
    Likes Received:
    2
    Not too sure about where to post this... it is about recording with and audio interface so here it is.

    I'm currently set up with an RME Babyface Pro + RODE K2 microphone.

    The moment I turn on the dedicated phantom power, I see that the levels peak and the LED lights hit the red for a split second. Is this normal? Is it supposed to clip when I turn on the phantom power?
     
    magnaproxy, Sep 4, 2016
    1
  2. Ads Master

    Ads Master

     
  3. dbmuzik

    dbmuzik Platinum Record

    Joined:
    Apr 15, 2013
    Messages:
    540
    Likes Received:
    294
    Best Answer
    It is pretty typical with audio interfaces. When you're going to turn on phantom power you should have your input gain on your interface turned all the way down initially. Also you can go into your sound properties on your OS and change the default record level for the audio driver to a lower value. Only do this if the input signal is extremely hot even when you only have the gain turned up just a little.
     
    Last edited: Sep 4, 2016
    • Like Like x 1
    • Agree Agree x 1
    • List
    dbmuzik, Sep 4, 2016
    2
  4. Andrew

    Andrew AudioSEX Maestro

    Joined:
    Oct 24, 2011
    Messages:
    2,006
    Likes Received:
    1,241
    Location:
    Between worlds
    Yes this is normal.
    Phantom power supply voltage as DC offset, which A/D interprets as low frequency signal for a split second and that causes the clipping.
     
    • Like Like x 1
    • Agree Agree x 1
    • List
    Andrew, Sep 4, 2016
    3
  5. magnaproxy

    magnaproxy Newbie

    Joined:
    Jul 10, 2016
    Messages:
    36
    Likes Received:
    2
    Thanks to all of you. I thought it was some kind of a hardware problem... phew! :disco:
     
    magnaproxy, Sep 4, 2016
    4
  6. subGENRE

    subGENRE Audiosexual

    Joined:
    Sep 8, 2011
    Messages:
    2,477
    Likes Received:
    1,519
    Yes, my mackie onyx does the same thing. Just turn it down before powering on the mics
     
    subGENRE, Sep 4, 2016
    5
  7. Geniii

    Geniii Noisemaker

    Joined:
    Sep 4, 2016
    Messages:
    7
    Likes Received:
    5
    Just make sure to turn down speakers volume not to blow them up:)
     
    Geniii, Sep 4, 2016
    6
  8. Baxter

    Baxter Audiosexual

    Joined:
    Jul 20, 2011
    Messages:
    3,963
    Likes Received:
    2,798
    Location:
    Sweden
    It's normal for most preamps. Some preamps/mixers does ramping on the voltage when you turn them on. It's a pretty neat solution to prevent this popping/transient.
     
    Baxter, Sep 4, 2016
    7
Loading...
Similar Threads - Audio interface clipping Forum Date
Can you directly patch the audio output from a Eurorack module directly into a mixer/interface? Soundgear Today at 3:37 PM
Linux - Round Table - Plugins - Audio Interfaces Linux Feb 17, 2026
Signal routing problem from pc out to audio interface and back to pc. Computer Hardware Feb 7, 2026
Connecting audio interface to Zoom H2n? Computer Hardware Jan 14, 2026
Arturia MiniFuse 2 OTG: a dual-mode USB audio interface for mobile creators Soundgear Dec 12, 2025
Loading...