It should work with the built in Focusrite ASIO Just select whatever your output cables are coming out 1 for Left and 2 for Right. I wouldn't use any of the build in Windows ones. Change to ASIO from Focusrite or ASIO4ALL you can download but stick with factory for now to get your sound in both speakers

https://support.focusrite.com/hc/en...an-I-use-ASIO4all-with-my-Focusrite-Interface

 

got the loops to play,pan to right and guess what? u got it same scenario

 

show us your settings in DAW for audio setup and a screenshot of your mix control software again and take a photo of the back of your Saffire with output cables thanks

 

i have just switched all off there.i mite be back in an hour if not ill do it tomoz.
i can tell u that i have line outputs 1 and 2 cable from those to my monitors scroll back and look at the screenshot i took earlier of saffire mix.
remember it worked fine before.
the way i have mix control set up is the way the focusrite guy told me years ago i havent dared touch anything in it

 

Focusrite - well that's your problem. Get an RME interface and your problem will vanish.

 

brilliant

 

and its not gonna make any diference showing u the way i have audio setup in cubase. the same issue is happening with fl studio

 

No worries but just to make sure in Cubase this is how it works so you could check when you next boot up. At least we might be able to help narrow it down a bit. If you can hear a simple speaker left right panning test on YouTube OK then it seems it could be some of your DAW settings messed up.




If same issue is happening in all DAWs then it possibly your Saffire Mix Console messed up and not setup right for both channels. You should see audio meter visuals for both left and right of main output in Mixer (Mix Console)

 

those attachments are how i have set up in cubase. i google speaker left right pan test youtube done video and no sound on right when it goes to right test
the left test comes thru both sides

 

the left test comes through both sides

 

Sounds like your Mix Console is setup wrong then, maybe something reset it

 

but i bypassed it remember to run reaper and same result

 

Try change Monitor Output 2 to DAW 2 and set your outputs right then you should get Stereo and a DOUBLE channel visual display for Mix Output at far right as your only looks single block... See difference in images on Page 3 of this thread between yours and screenshots from Google

Just remember what you change and you can always put it back. I had the same Saffire Pro 40 and Saffire Pro 26 DsP

You can probably save your mixer setup too and know you can create different mixer pages in the tabs above

 

Last edited by a moderator: Mar 2, 2024

before i seen this message,for some reason i went into mix control. on the line input 3 and 4 section i changed line output 4 to DAW2 while playing a track on media player. to my absolute astonishment and cant think of the word i need i could hear stereo information. went into fl studio as it quicker to load, and i was able to pan
yes,astonishment is the word

 

Had just done this too to help too

 

Great so you fixed it yourself with no help... greatly astonishing

 

thanks all for suggestions. now the fun of reinstalling sound id!

 

I'll pray... just installed the sonarworks soundID myself to test it out with my headphones

 

Last edited: Mar 2, 2024

It's definitely a political issue

 

I'd start putting money aside for the next interface you plan on buying. Maybe this happened for no good reason, but due to my past experiences with Focusrite and their software; I would be expecting this to rear it's ugly head again. This is probably a prelude to "The End".