I think people understand what I meant by "registries" = Registry Editor

 

Last edited: Dec 25, 2022

Cleaning out a register can also mean to commit a robbery

 

But you did not even say "registries". You said "registers".
This is the kind of thing I mean EXACTLY.

When I pointed out that you made a mistake, did you not look at your own post to see if you made a mistake?
I don't know. Perhaps you did look but misread it.

People make mistakes, but when giving advice one should be extra careful to be accurate.
And if someone points out a mistake you made, you should be even MORE careful to read it over.

 

So I have reaper on windows 7 and a couple of older pa and brainworx installed previously. I installed this new bundle and then when I try to open reaper it kept freezing while trying to open because I run a template that had an old pa plug. So I went to control panel and uninstalled the old versions and now reaper will open. But it says it can't open the pa plug that was on the template. So I tried to replace it with the same plugin from the new bundle but the regular vst doesn't show up and the vst3 brings up a message saying "the following plugin could not be loaded: (the plugins name) effect configuration is preserved" and the wierd thing is that the new plugins that I have tried will work but none of the ones I already had will. They are completely not showing up in vst and only show up in vst3 but they all bring up the same error.. I looked in the vst3 folder and all the plugins have today's date and the ones that were there before are gone or have been overwritten. I've seen something about clearing the registry but I don't know what that means...

 

why are some VST3s 1kb?
What is with this 1kb VST3 BS?
What am I doing wrong?
I installed the wrapper first.
Some are 1kb VST3.

Surprisingly, S16 is actually identfying this 1kb VST3 files.

I mean, WTF is happening?
I am happy. Cool.
But I just wanna know.

 

Last edited: Dec 26, 2022

if you check this folder you will find the answer
C:\Program Files\Common Files\Plugin Alliance\

 

Well
I have checked that.
But I just wanted to know is it done deliberatly by R2R or PA?

 

i think its r2r because there was a same thing in sylenth1 release.

 

Does anyone have any problems with aax? PT freezes while loading it

 

Mine kept freezing reaper while trying to load a session that had a pa plugin from a previous release. And it wouldn't load any plugins at all that were in any of the prior releases, so only the newest ones would work...still waiting on a solution myself but do you have any prior plugin alliance stuff on your computer?

 

Well I went back and deleted everything that I could find and then reinstalled the new bundle. Now everything works but all of the ones from previous bundles are missing except for the vst3 version. The wierd thing is that I can load a template with the regular vst version of those plugins and they will load and work but they just won't show up where I can add them on a new track. Maybe I should just switch to vst3 but I have a lot of presets saved on the other versions

 

Yous should read comments at sister site:

 

Anyone else having difficulty getting some of the Lindell stuff working? I've tried this install twice, everything seems okay now with the exception of:

Lindell 6X-500
Lindell 7X-500
Lindell 80 Bus
Lindell 80 Channel
Lindell Channel X
Lindell Pex 500

On a Win 10 machine in Studio One, VST 3 installation only, the above show up in the plugin list but trying to drag them into a channel and they're all greyed out and won't open. For the life of me can't figure out what I'm doing wrong. Searched all over my machine for prior releases of any of these, come up with nothing. Unless everyone else is having the same problem must be some dumb error on my part.

 

Win 10 and Reaper here. I think I must have left some old plugins not properly uninstalled. Only the plugins that don't need the wrapper are working, so non of the bx_ stuff and in fact most are not showing in Reaper.

@Bennett.Jackson for me the Lindell are some of the few that work and I've tried everything that I can think of.

The only thing that I think I may have got wrong is leaving uninstalled traces, but I've cleaned the local and roaming folders and followed all the instructions I found to clean up so, yep I'm out of ideas too.

 

Last edited: Dec 26, 2022

Does anyone know why the vst2's fail to appear in reaper? I'm not sure how many of the vst3's aren't showing up but I know the ENGL 646 VS isn't appearing in vst2 or vst3. But I can load these plugins if I open a saved session or track template that has the plugins saved to them. So the template I made with the 646 VS and the bluechorus2 will load and the plugins will work but they don't show up in reapers plugin list where I can add them to new tracks. I finally got the new bundle to work by uninstalling it and all previous plugin alliance, brainworx and Lindell bundles from every folder I could find them in and then reinstalled the new bundle. I used the effect and instrument group installers so the only thing I can think of is to try installing them all individually. Anyone know what is wrong here?

 

With Cubase 12 no problem..... FL Studio opens them, but with empty space on the right the problem is in FL Studio.

 

thanks for letting me know. Must be something I've done wrong on my end, I'll figure it out.

 

thought this may help people: @Buhdurkachomp posted on the sister site and it worked for me (win10 + Reaper) - thanks buddy,

take a look in c:/ users / name/ AppData Roaming REAPER and then inside reaper-vstplugins64.ini

open that in notepad and there were calls to the plugins that weren't working - I deleted all those lines and re-saved the file .

Installed the plugins and hey presto all working.

hope this helps those with problems

 

The only problem I found so far is the Pro Audio DSP DSM V3 doesn't come with factory presets and you can't save or create presets because of it for some reason. The presets are really important for this type of plugin because it stores curves from hundreds of references that you can use to set up the threshold curve.

The "fix" is simple. I downloaded the retail installer from PA website, installed it, copy the preset folder at PA folder inside Program Files, and delete the rest, reinstall the R2R version on top of it. You kinda need PA account to download the retail installer though. I want to share the file here but I think it is not allowed. Can I @Olymoon ? because it is not Warez.

 

Why not share the explanation and the file at sister site? It makes more sense to have all together, the R2R files and yours.