11.1 Release Notes 31-01-2022

New features and improvements:

• Native Apple Silicon Support
  • Live 11.1 adds native support for Apple M1 computers.
• Arrangement View Improvements
  • You can use the left arrow key to navigate from an automation lane or take lane to the main track, this will fold the lanes as well. You can also use the left arrow key to navigate from tracks in a group to the main Group Track.
    
    
  • The Arrow Left/Right shortcut has been added to the Arrangement Track Title Bar info text. The shortcut folds/unfolds the track.
    
    
  • The Arrow Left/Right shortcut has been added to the Toggle Additional Automation Lanes info text. The shortcut folds/unfolds additional automation lanes.
• Browser
  • A new Devices icon has been added to Live’s Browser:
    • When viewing Sets in the browser, you will see a Devices icon for device chains on a track that contain at least one device.
      
      
    • When you expand a Live Set in the browser, either from the Current Project folder, Templates folder, or a folder of Sets you have added in Places, you can unfold the tracks in the Set to reveal their device chains. These chains can then be moved into the current open Set using drag and drop or by double-clicking on the chain. The Device settings from the original Set are retained but any previously recorded automation is not.
• Capture MIDI
  • In the first captured MIDI clip (in an empty set with the transport stopped), if the detected loop is eight bars or less, the first played note is considered the start of the loop.
    
    
  • When only one note is played in the first captured MIDI clip (in an empty set with the transport stopped), the loop boundaries are set to the note start and end, and the tempo is accordingly calculated, resulting in a one, two, four, or eight bar loop. This is particularly useful when playing a rhythmical sample with a single MIDI note.
    
    
  • In Session View, new captured clips now use the “Adaptive Grid: Narrow” setting instead of “Fixed Grid: 1/16.”
• Clip View
  • Added responsive Clip View options:
    • In Clip View, all clip properties are now displayed in panels/tabs instead of separate panels. Clip View properties can be arranged vertically by moving the mouse cursor to the left from the Clip View panel edge next to the Sample Editor/MIDI Note Editor.
      
      
    • Clip View properties can also be arranged automatically, which switches between the horizontal and vertical views depending on the height of the Clip View area. Select “Arrange Clip View Panels Automatically” from the View menu to enable this option.
      
      
    • When Clip View panels are arranged vertically, the individual tabs (e.g. Clip, Audio, Envelopes, etc) can be collapsed and expanded using the arrow icon to the right of the tab header.
      
      
    • When Clip View panels are arranged vertically, the individual tabs (e.g. Clip, Audio, Envelopes, etc) can be folded/unfolded using the Arrow Left/Right keys.
      
      
    • Sample information for audio clips (e.g. sample name, sample rate, etc) is also displayed in the Clip View and appears differently in the vertical/horizontal view modes.
      
      
    • Clip View panels can now be accessed using keyboard shortcuts. In MIDI clips, ALT + 1 switches to the Notes panel, ALT + 2 switches to the Envelopes panel, and ALT + 3 switches to the Note Expression panel. In audio clips, ALT + 1 switches to the Audio panel and ALT + 2 switches to the Envelopes panel.
      
      
    • Clip View can be toggled to its maximum height using the keyboard shortcut CTRL+ALT+E (Win) / CMD+OPT+E (Mac) or the View menu entry “Expand Clip Detail View.”
      
      
    • The chosen Responsive Clip View mode is now saved in Live’s Preferences.cfg file.
  • When multiple audio clips are selected, the sample properties (sample rate, bit depth, and channel count) for all samples will be displayed in the Clip View. If a value is not the same for all samples, the character “*” will be displayed. In Clip View, you will also see the total number of samples selected.
    
    
  • The Pitch dial is now smaller and the Gain slider has been enlarged.
    
    
  • When switching between panels in Clip View using the keyboard shortcuts ALT + 1/2/3, the panel header that was switched to will be selected.
    
    
  • If Clip View is arranged horizontally when Live is first opened and either the Audio or Notes tab is selected, the corresponding panels in both audio and MIDI clips will remain unfolded when switching to Clip View’s vertical arrangement.
• Comping
  • You can now duplicate selected take lanes using the keyboard shortcuts CMD + D (Mac) / CTRL + D (Win), or by right-clicking on the take lane header and selecting “Duplicate.”
    
    
  • Changing the color of a clip in a take lane changes the color of the corresponding clip in the track’s main lane and vice versa. Splits are created on the updated clips in certain cases when the relation between other highlights on different clips change.
    
    
  • The horizontal lines that separate multiple take lanes match the color of the clips that are in those lanes.
    
    
  • When renaming multiple tracks or take lanes using the context menu option, you will see the edit field when you right-click on a track or take lane.
• Control Surfaces
  • When navigating between devices on a selected track with the PreSonus ATOM SQ, you can now scroll between devices by holding the navigation buttons down.
    
    
  • If an invalid CC, note, or channel value is used in a UserConfiguration.txt file, the associated User Remote Script can still be loaded.
• Core Library
  • Frequency Shifter presets are still available in Core Library/Devices/Audio Effects/Legacy/Frequency Shifter
• CPU Meter
  • The CPU meter drop-down menu now can be customized to display:
    • both the Average or Current CPU usage levels
      
      
    • only the Average level, with the Current level switched off
      
      
    • only the Current level, with the Average level switched off
  • Alternatively, the CPU meter can also be switched off entirely.
    
    
  • By default, Live will not display the Current level; it must be enabled from the drop-down menu.
• Interface
  • You can use the left and right arrow keys to switch between radio buttons anywhere in Live. If you are switching between radio buttons on a device that is inside of a Rack with the left and right arrow keys, you can get back to moving between devices in the Rack using the left and right arrow keys by hitting the ESC key.
    
    
  • In Session and Arrangement View, the Monitor radio buttons now have a default state that can be restored. When the In/Out section is expanded, you can press the Delete key to reset the Monitor radio buttons to the default (“Off” for audio tracks and “Auto” for MIDI tracks). This option is also accessible via the Edit menu option “Return to Default.”
    
    
  • The Quantize Settings dialog buttons in the MIDI Note Editor now say “Apply” and “Close” instead of “OK” and “Cancel.”
    
    
  • Deactivated device title bars are easily readable in all Live Themes, even if the device is selected.
    
    
  • On Mac, the mouse cursor will now display an arrow pointing in a single direction when hovering over split views which can be resized in one direction only.
    
    
  • An error message will be displayed in the status bar if an auto-update cannot be downloaded.
    
    
  • Added a new "MIDI Envelope Auto-Reset" entry to the Options menu:
    • When enabled, certain MIDI control message types that are not automated for a given clip will automatically reset at the start of a new clip.
      
      
    • Note: for users who intentionally work opposite to this behavior, enabling this change will make corresponding Live Sets behave differently.
      
      
    • In Live 11.0.5, "MIDI Envelope Auto-Reset" is disabled by default.
      
      
    • In Live 11.1, "MIDI Envelope Auto-Reset" is enabled by default for new Sets, and disabled by default in older Sets.
  • Updated various info texts.
    
    
  • Updated some Help View lessons.
    
    
  • Added support for keyboard shortcuts on French keyboard layouts for macOS versions 10.14 and older. Keyboard shortcuts that have numbers can be accessed without having to press Shift to access the number keys.
• Max for Live
  • Updated the bundled Max build to version 8.2.1.
    
    
  • Link functions have been added to the Max for Live API.
    
    
  • You can access the IDs of newly created notes using the Python API or the Max for Live API.
    
    
  • It is possible to get a dictionary of all the notes in a MIDI clip using the Python API or Max for Live.
    
    
  • It is now possible to call select_notes_by_id on a Clip object in Max for Live, passing a list of note IDs. This will select only those notes that have the provided IDs.
    
    
  • Users can now get and observe the average_process_usage, peak_process_usage, and a track's performance_impact via Max for Live.
    
    
  • When Max fails to load, an error message will be displayed that contains a link to a Knowledge Base article that explains potential causes for the issue and steps to take to resolve it.
    
    
  • Error reporting in the Max Window is more consistent.
    
    
  • Four new theme colors are available in Max for Live.
    
    
  • amxd~: ‘realtime_params’ attr for realtime report of parameter data from outlets
    
    
  • Dynamic Colors: ability to use a name which references a dynamic color (follows Live or Max color Themes)
    
    
  • live.adsr~ / live.adsrui: new objects
• MPE
  • Added an MPE Settings dialog box to the I/O section of Live’s mixer. You can use the settings to:
    • configure the MPE zone and range of note channels used by Live when sending MPE to an external MIDI device or plug-in
      
      
    • select the upper or lower zone and number of note channels
      
      
    • select multi-channel mode, which sets an arbitrary range of note channels
  • The above MPE settings can be used for hardware synths that require a specific MPE configuration, or plug-ins that do not officially support MPE but can be used with MPE controllers due to their multi-timbral support.
• Multi-Clip Editing
  • Time selection interactions, note selection interactions, and new note editing options have been added to multi-clip editing:
    • Time in the MIDI Note Editor can be selected across loop and clip boundaries.
      
      
    • Note editing (e.g. copy, cut, paste, delete) can be used when working with note selections across clips and loop boundaries.
      
      
    • Notes can be cut or copied from multiple clips and inserted into the same set of clips, as long as the clip selection/foreground clip has not changed, or into a different clip once that new clip has been selected.
  • Selected loop bars can now be duplicated using the context menu or the CMD + D (Mac) / CTRL + D (Win) keyboard shortcuts.
    
    
  • In Arrangement View, it is possible to draw notes in background clips without first changing the foreground clip. Notes can also be drawn continually across clip boundaries, except in Focus Mode.
    
    
  • When using a pen to draw notes with "Draw Notes with Pitch Lock" enabled, any notes that cross a loop boundary are no longer deleted.
    
    
  • When more than 64 clips or eight tracks are selected in Arrangement View, the MIDI Note Editor is no longer available for multi-clip editing to prevent potential performance issues.
• New Devices and Device Improvements
  • Introduced "Shifter", a new audio effect in Live Standard and Suite. Shifter is a multi-purpose audio effect for pitch shifting, frequency shifting, and ring modulation. The pitch or frequency of incoming audio can be tuned using Coarse or Fine parameters and further adjusted with a Tone filter and Window parameter. Shifter also has Delay, LFO, and Envelope Follower sections for additional modulation. The Shifter device can set pitch or frequency using its own parameters or by incoming MIDI notes.
    
    
  • Introduced the Align Delay device, which is now included in the set of Max for Live devices that come with a Suite license, or a Standard plus Max for Live license. Align Delay is a Max for Live device that delays incoming signals by samples, milliseconds, or meters/feet.
    
    
  • Introduced the Shaper MIDI device, which is now included in the set of Max for Live devices that come with a Suite license, or a Standard plus Max for Live license. Shaper MIDI is a Max for Live MIDI device that uses multi-breakpoint envelopes to generate mappable modulation data.
    
    
  • The Cytomic Filters, which are used in the Wavetable, Echo, Simpler, Sampler, Operator, and Auto Filter devices, have been updated and improved in stability, sound and performance. As of 11.1, the Cytomic filters (particularly the MS2 and SMP options) might deviate in sound compared to previous Live versions, especially when driven hard.
    
    
  • An update to the Softtube libraries may cause subtle sound changes in the Amp and Cabinet audio effects.
    
    
  • In the Sampler, Wavetable, Impulse, Simpler, Channel EQ, Hybrid Reverb, Chorus-Ensemble, Phaser-Flanger, Echo (output knob only), Spectral Resonator (input send only) devices, Gain controls now increment/decrement consistently by 1 dB when pressing the up/down arrow key, or by 0.1 dB when pressing the [Shift] key.
    
    
  • Spectral Time:
    • The effect order can now be reversed using two radio buttons “Frz > Dly” or “Dly > Frz” on the right panel of the Spectral Time device above the Dry/Wet knob.
      
      
    • A “Zero Dry Signal Latency” option has been added to the context menu in the Spectral Time device. Enabling it reduces the latency of the dry signal to zero instead of syncing it with the output of the effect. This option is useful when playing a live instrument through Spectral Time and monitoring the output.
  • Spectral Resonator:
    • In the Spectral Resonator device, the Shift parameter will now increment/decrement by one semitone when pressing the up or down arrow keys, or by one octave when holding the Shift key.
  • Wavetable:
    • A context menu option for Hi-Quality mode has been added to the Wavetable device. When Hi-Quality is off, Wavetable modulation is calculated every 32 samples. Low-power versions of the Cytomic filters are also used to further reduce CPU. Using Wavetable with Hi-Quality mode off can save up to 25% CPU compared to having it enabled, which is ideal for working with large sets or maintaining low latencies. Please note that as of 11.1, Hi-Quality mode will be off by default when loading a new instance of Wavetable or any of its Core Library presets. However, any user presets or Live Sets created previously will still load Wavetable in Hi-Quality mode to ensure sound consistency with earlier Live versions. Subtle sound differences may occur when Hi-Quality mode is enabled.
• Packs
  • For the latest Live Pack updates and bugfixes, check out the Packs Release Notes.
• Push Device Visualization
  • On Push 2, the Hybrid Reverb parameter banks Algorithm 1 and Algorithm 2 have been renamed to Algorithm Pg 1 and Algorithm Pg 2. Also some parameters for Hybrid Reverb on Push 2 have been rearranged for easier navigation.
    
    
  • Updated some parameter names for the Chorus-Ensemble device on Push 2.
    
    
  • The Saw Up and Saw Down icons for Sampler’s LFO waveforms on Push 2 now appear as expected.
• Session View Improvements
  • Using the left and right arrow keys to navigate the Session View no longer skips return tracks, if they are visible.
    
    
  • Multi-selecting scenes now behaves the same as multi-selecting clip slots.
    
    
  • Selecting scenes no longer highlights the Master track, instead the scene itself is highlighted.
    
    
  • Navigating from the last clip slot to a scene with the right arrow key will highlight the Master track.
    
    
  • You can click on a scene number or the Master track header to access the Master track and Scene View panel.
• Setup
  • To avoid incompatibilities, you will be asked to save Live Sets created with an older version of Live as a new file in Live 11.1.
    
    
  • In Live’s Preferences, file paths that are unavailable (e.g. if an external drive is not connected) display a “(not available)” message. Paths that haven’t been set yet display a “(not set)” message.

Bugfixes:

• Live Bugfixes
  • Devices that use beat sync divisions now remain in sync when the device is re-enabled during playback.
    
    
  • The Filter LFO dropdown menu in the Tension device now appears as expected.
    
    
  • Previously, when merging a device chain containing no instrument with another device chain containing an instrument, the instrument would be deleted from the merged chain.
    
    
  • Live no longer moves samples from a temporary project to the final saved project folder.
    
    
  • Fixed a bug that created file path issues with the Live Recordings temporary folder if it was also saved and renamed in Places.
    
    
  • The undo text for changed clip colors has been corrected in the Edit menu.
    
    
  • Previously, if a plugin was grouped into an Instrument or Drum Rack, the MPE settings of the plugin were not retained when the Rack was saved as a preset.
    
    
  • Fixed a crash that occurred if non-supported MPE data (e.g. MIDI CCs other than Pitch, Slide, or Pressure) was sent to a Sampler/Simpler device.
    
    
  • Fixed a crash that occurred when clicking on a parameter in Live and adjusting the same parameter using an encoder on Push at the same time.
    
    
  • Fixed a crash that occurred if all return/delay tracks were deleted and then a track containing a take lane was duplicated and moved. Live would crash if undo was selected twice after duplicating and moving the track.
    
    
  • In the Filter/Mod section of the Delay device, a custom icon for the Ping Pong setting is now displayed on Push 2.
    
    
  • Fixed a crash that occurred when going to “Save Set as Template” from the File menu, then typing the name of the set, and finally pressing the [Escape] key twice to cancel the process.
    
    
  • Fixed a bug that caused peak CPU load to be calculated incorrectly if the buffer size selected in Live’s Preferences wasn’t a multiple of 64 samples.
    
    
  • Fixed a crash caused by loading multiple instances of certain VST3 plug-ins when Live’s transport was running.
    
    
  • Fixed an issue in Session View that caused notes to sometimes be triggered twice when recording a MIDI clip with both “Record Quantization” and “Chase MIDI Notes” enabled.
    
    
  • Fixed an issue caused when using multiple Control Surface scripts that are set to automatically arm MIDI tracks.
    
    
  • When highlighting an area of a take lane using Draw Mode, the clip name appears as expected.
    
    
  • Plug-ins that cannot be loaded appear with a standard device background that includes a more detailed error message.
    
    
  • Loading .alc files from Core Drum Kits into Arrangement View now preserves the Drum Rack chain routings.
    
    
  • In Arrangement View, the dialog box that appears when multi-clip editing is no longer available because more than eight tracks are selected appears as expected.
    
    
  • When several audio clips with different pitch values are selected, you will see the range of values for each clip highlighted in blue on the Pitch dial in Clip View.
    
    
  • Renaming take lanes in linked tracks works as expected.
    
    
  • Folded clips with long fades appear as expected.
    
    
  • Fixed an issue that caused clip fades to reset when resizing adjacent clips.
    
    
  • Fixed a crash caused by some VST3 plug-ins with certain undesignated MIDI CC mapping parameters.
    
    
  • The CTRL + 5 fixed/zoom adaptive grid keyboard shortcut works as expected on Windows.
    
    
  • Fixed an issue in Session View that caused notes to sometimes be triggered twice when recording a MIDI clip with both “Record Quantization” and “Chase MIDI Notes” enabled.
    
    
  • Fixed two bugs that caused the time selection to not be updated as expected when editing several clips compared to editing a single clip.
    
    
  • E-Piano Wurli.adg preset: Volume Macro is now excluded from randomization.
    
    
  • Womp Bass.adg preset: Typo in original file name is now fixed. If the preset was previously part of Collections it needs to be added again.
    
    
  • Fixed a crash caused by copying and pasting a device from the browser into a Drum Rack’s return chain in the Session Mixer under certain conditions.
    
    
  • Fixed a crash caused by clicking in a certain area of the Sample Editor when editing unwarped audio clips in Clip View.
    
    
  • Fixed a crash that occurred if a user tried to change the scale of a Live Set from Push while having the Focus mode on in multi-clip editing mode without a clip selected.
    
    
  • Fixed an issue that caused some Live Sets to become corrupted even though the sets could be opened normally in earlier Live versions.
    
    
  • Removing the MIDI mapping of the Pitch control in audio clips using the Delete key works as expected.
    
    
  • Fixed a bug that caused the Pitch parameter in audio clips to move too quickly when “Pen Tablet Mode” was enabled in Live’s Preferences.
    
    
  • Fixed a crash caused by pressing Tab or Shift-Tab while holding the mouse cursor on a parameter in Clip View.
    
    
  • In Draw Mode, when Pitch Lock is off, users will now get consistent results: a line/curve of notes will follow mouse movement without producing gaps or unexpected layers.
    
    
  • In Draw Mode, when Pitch Lock is on, users can draw back and forth along a key track without removing any notes that are placed underneath (the same as in Live versions prior to 11.0).
    
    
  • When syncing Live to an external MIDI clock, if the MIDI clock signal gets lost, the Ext Sync button will switch off after the dialog in Live appears saying that the signal has been lost.
    
    
  • The grid spacing is now displayed in the MIDI editor as expected after warping and unwarping audio clips.
    
    
  • Fixed an issue when resizing audio clips in Arrangement View using the mouse and Shift key that caused clips to continually be resized even after letting go of the mouse.
    
    
  • Fixed an issue in several Control Surface scripts that resulted in incorrect LED button states when deleting tracks.
    
    
  • Fixed an issue on Apple silicon computers where Drum Racks nested inside of an Instrument Rack could produce CPU overload and audio dropouts even when many of the nested chains were silent.
    
    
  • Fixed a bug that caused the Freezer section of the Spectral Time device to remain active even if the device itself was deactivated.
    
    
  • Fixed an issue that caused auto-updates to fail on certain computers on Windows OS.
    
    
  • Fixed an issue that caused MPE pitch bend breakpoints to be removed if a note transformation, such as Quantization, was applied.
    
    
  • Fixed a crash caused by certain plug-in parameters if they no longer existed in a newer version of the plug-in. Plug-in parameters that are no longer available will be displayed as deactivated.
    
    
  • Fixed a crash caused by pasting a track in Arrangement View immediately after scrolling with a mouse wheel or trackpad.
    
    
  • Fixed a crash that occurred when deleting the last scene in Group Tracks under certain circumstances.
    
    
  • Fixed a crash that occurred when frequently switching the Max for Live Note Delay device on and off in between note on and off messages.
    
    
  • Fixed an issue with the Note Length MIDI effect that caused the incorrect velocity to be generated in release mode if a note was released after recording in a loop.
    
    
  • The Launchpad Mini MK3 control surface script now works as expected when pressing the Scene Launch Buttons after entering and then existing Session Overview.
    
    
  • Fixed an issue that caused the Scale MIDI Effect to cut off played notes if the scale was set to a single note.
    
    
  • AU plug-ins are now informed about silent inputs so that they can release CPU resources and report output silence if possible. This will allow any device in the device chain after the AU plug-in to release CPU resources as well.
    
    
  • Fixed a crash on Windows that occurred if a dialog window opened while a context menu was also visible.
    
    
  • Fixed an issue that caused Push to get stuck on the logo screen.
    
    
  • MIDI notes and waveforms no longer jiggle when dragging a clip back and forth from its left edge.
    
    
  • On Windows, closing a VST3 plug-in window no longer minimizes Live.
    
    
  • In large sets containing thousands of scenes, Live’s UI no longer lags when changing a parameter value with MIDI CC.
    
    
  • Crashes that occurred when dropping a device with no MIDI or audio output onto a device chain are now prevented.
    
    
  • Fixed certain crashes that involved VST3 plug-ins or Max for Live devices on Windows.
    
    
  • Fixed a crash caused by dragging multiple Drum Rack chains into the panel window of the rack that displays how many chains are selected.
    
    
  • Fixed a crash that occurred when freezing or rendering audio in certain scenarios. An error message will now appear saying that the rendering process has been stopped and to contact Support.
    
    
  • A custom location for the User Library or Factory Packs will not reset back to default if Live launches and cannot find the custom path (for example, a disconnected external hard drive).
    
    
  • Fixed several issues with the MackieControl and MackieControl_Classic control surface scripts that caused incorrect button LED feedback.
    
    
  • When using the Mackie Control Surface script, the Mixer button LED will flash on or off depending on whether Follow is on or off in Live.
• Max for Live Bugfixes
  • When the LFO device's modulation waveform exceeds its minimum/maximum, it now draws a horizontal line, as is consistent with the Envelope Follower and Shaper devices. The MPE Control device no longer creates high CPU spikes when receiving MIDI CC 64 (Sustain).
    
    
  • Fixed various bugs that affected these bundled Max for Live devices: Envelope MIDI, LFO, Note Echo, and MIDI Monitor.
    
    
  • Fixed a bug with the Expression Control device.
    
    
  • Fixed a bug that caused the Max for Live device MPE Control to block MIDI Program Change messages.
    
    
  • Key events keep working when a selected Max for Live device becomes invisible.
    
    
  • Selected parameters of a Max for Live device can still be controlled by key events even if the device is no longer visible.
    
    
  • The correct return IDs of newly created notes will be added to new clips when using the Python API or Max for Live API.
    
    
  • Mapped waveforms in the LFO device appear as expected.
    
    
  • Setting the MPE Control device Pitch Curve to an S Curve shape works as expected.
    
    
  • Fixed an issue that could cause CPU spikes when using Channel Aftertouch in the MPE Control device.
    
    
  • Control Surfaces are now represented by their LOM ID as expected when retrieving the list of control_surfaces via live_app in Max for Live.
    
    
  • The waveform displays in the Max for Live devices Envelope Follower and Shaper now appear as expected.
    
    
  • Assigned grooves are no longer lost when using the "duplicate_clip_to_arrangement" Max for Live API function to duplicate a Session clip to Arrangement View.
    
    
  • amxd~: notifies parameter hub when device state changes
    
    
  • jit.gl.model: fixed file loading when embedded in a Max for Live device
    
    
  • jsliveapi: eliminate crash when there's no 'this' for operations
    
    
  • jsliveapi: improved handling of large strings
    
    
  • live.* UI objects: improve negative value handling with some units
    
    
  • live.* ui objects: Outputs the correct value when opened and initialized by pattr
    
    
  • live.banks: error reporting refinements
    
    
  • live.banks: fixed bank renaming in response to '-' argument
    
    
  • live.banks: fixed crash when adding a new bank with index 1 when banks are empty
    
    
  • live.banks: fixed crash with certain 'edit' messages
    
    
  • live.banks: fixed crashing with bad input
    
    
  • live.dial: fixed large mode automation drawing
    
    
  • live.drop: ensure value when restoring
    
    
  • live.scope~: fixed delayed drawing after deletion
    
    
  • Help patchers: fixed crash clicking '?' menu in Live
    
    
  • Device project: fixed hang when changing the "development path type"
    
    
  • Editor Startup: improved Windows startup times
    
    
  • Live Object Model doc: updated with Live 11 additions
    
    
  • Parameters: filters hidden parameters before generating automation for Live
    
    
  • pcontrol: scheduler works in patches opened via load message
    
    
  • Timing: improved locked metro accuracy
    
    
  • Max Console in Max for Live: long text wrapped and shows device name
    
    
  • Object Browser: Max for Live UI objects shown in correct category
    
    
  • Object Palette: icons added for all live.* UI objects
    
    
  • Parameters Window / Inspector: auto-quote Info Title / Info
    
    
  • Parameters: only dirty if it exists in a Max for Live device
    
    
  • Performance: CPU usage improvements after starting Editor
    
    
  • jit.gl.lua: fixed outlet functionality (fixes Inspired by Nature Max for Live devices)
    
    
  • live.scope~ / live.adsrui: updated icons
    
    
  • umenu: improved popup positioning with multiple displays at mixed resolution/zoom
    
    
  • Windows: increased main thread stack size to match OSX (8 MB)

 

11.1.5b1 Release Notes (16-02-2022)
New Features and Improvements:

• When renaming multiple scenes via the context menu, the edit area will appear on the scene that you right-click and the scene selection will be preserved even if a highlighted scene was not selected.
  
  
• The Expand Clip Detail View shortcut is only enabled when it makes sense, e.g., when a clip is selected and the Clip View is visible.
  
  
• When collapsing the Clip View (for example by using the shortcut [OPT][CMD][L]) while it’s expanded and then re-opening it again, Clip View comes back in its expanded size as expected.
  
  
• Clip borders are now drawn using opaque color to improve visibility.
  
  
• Users will see shorter names for certain values (e.g. waveform shapes) in various devices on Push 2.
  
  
• In Arrangement View, the right-click context menu grid setting options now appear as expected, even when there are various time signatures in the Arrangement.
  
  
• When a new software update is available and your auto-update preferences are set to Ask Me, a link to the latest release notes is included in Live’s status bar notification.
  
  
• Updated software texts and Help View lessons in English, French, German, Italian, Japanese, Spanish, and Simplified Chinese.
  

Max for Live Updates and Improvements:

• Updated the bundled Max build to version 8.2.2. For the complete changelog visit: https://cycling74.s3.amazonaws.com/support/version_8_2_2.html
  
  
• amxd~: eliminated extra border added to device after being dragged into patcher
  
  
• amxd~: improved error message object identification
  
  
• Dynamic Colors: default Max for Live device patcher background color follows Live's theme
  
  
• Dynamic Colors: loadtime improvements
  
  
• jsliveapi: ensure boxpath (fixes M4L.chooser issues)
  
  
• live.dial: Fixed triangle color
  
  
• live.gain~: fixed cursor location on mouse up
  
  
• live.step: dynamic colors work as expected
  
  
• Max for Live Device Projects: dirty the device when dependencies are added
  
  
• Max for Live Patter device: fixed crash on load (Live 11.1.b8)
  
  
• Max for Live unique identifier / ---: maintained when loading poly~ patchers
  
  
• panel: fixed enabling / disabling window_drag in Max for Live device subpatchers
  
  
• It is possible to unset the property when using live.observer by sending a property message without an argument (or property “”) without Max printing a warning to the console.
  
  
• Max for Live users now have access to the duplicate_notes_by_id function of the Clip LOM object.
  
  
• The view properties of the Wavetable and Compressor devices are now available in the Max for Live API.
  
  
• In the Max for Live API, get_notes_extended, get_all_notes_extended, get_selected_notes_extended and get_notes_by_id now optionally take their arguments in the form of a single dict. This dict can have an additional key or filters mapped to a list of note property names. If filters are provided, the returned dictionaries will only contain the specified properties rather than the full note descriptions.
  

Bugfixes:

• When a warped clip is frozen, the Grain Size parameter of the Tones warp mode is also frozen.
  
  
• Fixed a visual bug that caused small time selections to flicker when zooming out in Arrangement View.
  
  
• Fixed a regression that impaired Live's ability to deliver host information to VST2 plug-ins.
  
  
• When renaming multiple clips in Arrangement or Session view via the context menu, the edit area will be shown in the clip that you right-click.
  
  
• Fixed an issue that occurred by navigating with the Tab key when renaming multiple clips.
  
  
• Fixed a bug that caused preset parameters to load incorrectly in VST plug-ins on Apple M1 machines.
  
  
• The clip names of frozen take lane clips now appear as expected in Draw Mode.
  
  
• Extending an unwarped clip past the original clip end now functions as expected.
  
  
• When Draw Mode is enabled, grid lines will appear as expected in take lane clips.
  
  
• The time selection of folded tracks in Automation Mode now appears as expected.
  
  
• Using [Tab] and [Shift][Tab] while renaming tracks now allows the user to cycle between the first and last tracks in Arrangement View.
  
  
• In multi-clip editing, the Transpose and Velocity range sliders now become activated/deactivated as expected based on note/time selection.
  
  
• Fixed an issue that caused extra spacing to appear in track title bars when deleting multiple tracks.
  
  
• Fixed an issue that caused duplicate send letters in a return chain when renaming the chain in a Drum Rack.
  
  
• Fixed a small bug with multi-clip editing where some notes would not be selected properly in certain scenarios.
  
  
• On Push 2, the Frequency and Width parameters for the Corpus device are now displayed correctly.
  
  
• Scrollbars appear as expected when a long list of items is displayed.
  
  
• Consolidating audio clips no longer takes additional time when plug-ins are on corresponding return tracks.
  
  
• Navigation behavior between take lanes, clips, scenes, and tracks is now more consistent.
  
  
• Fixed an issue that caused tracks that were copied and pasted into an automation lane or take lane in Arrangement View to be added to the last track position.
  
  
• Fixed a bug that would cause Live to crash or hang when unplugging the audio output device during export.
  
  
• Fixed an issue that caused scanning VST plug-ins from Live’s Preferences on Apple Silicon computers to take longer than expected.
  
  
• Scanning VST2 and VST3 custom folder paths now works as expected.
  
  
• Duplicating time between two time signature change markers no longer adds an unexpected duplicate time signature change marker in the Arrangement.
  
  
• Updated values for automated MIDI CCs are now sent when scrubbing in the Arrangement or setting an Arrangement insert marker, even on armed MIDI tracks.
  
  
• MIDI CC automations from the clip will play when the track monitor mode is set to “In” which is consistent with how other automations are played back.
  
  
• Fixed a crash that sometimes occurred when selecting tracks that contained missing VST2 plug-ins.
  
  
• Fixed a crash that happened when adding a preset of an unavailable plug-in to the end of a device chain.
  
  
• Fixed a crash caused by adding MIDI Effect Racks onto MIDI tracks that were routed to one another but contained no instruments in their device chains.
  
  
• Fixed a crash that occurred when opening Flux:: VST2 plug-ins.
  
  
• The Auto option in the piano roll’s Accidentals context menu now always displays the actual spelling used.
  
  
• Fixed several issues with the MackieControl and MackieControl_Classic control surface scripts that resulted in button LEDs being left in incorrect states.
  
  
• The KeyLab and KeyLab88 control surfaces no longer cause Live to lag when active. In addition, the sensitivity of the encoders has been increased for both control surfaces.
  
  
• Setting a property on a live.observer without a valid LOM ID no longer causes a warning to be printed to the Max console.

Looks like a huge bigfix and features beta version.

 

You can look back for a few versions. i posted betas and final changelogs here and make an assumption.

It depends if its a bigger update. for example 11.1 took a bit longer than 11.0.12, sometimes well new versions are also just fast bugfixes as for one, where the authorization was bugged.

 

just released:

11.1.5b2 Release Notes (02-03-2022)
Bugfixes:

• If making a time selection with the mouse in multi-clip editing mode, the time selection will be preserved when clicking and dragging a note from the background clip.
• In multi-clip editing, selecting multiple notes by dragging the mouse right to left and then moving the selected notes now works as expected.
• Fixed an issue in several control surface scripts (such as ATOMSQ and KeyLab_Essential) that created unnecessary undo steps when adjusting parameters.
• Fixed an issue that caused time signatures changes in Arrangement View to be removed when freezing a track that also contained Session View clips.
• Fixed a crash caused by adding certain plug-ins (such as Omnisphere) to a track and then undoing the action. Live would also sometimes crash when trying to re-open the same Live Set after the initial crash.
• File and folder names that include special characters can now be opened as normal from Live’s browser.

 

Finally the Release notes were added for 11.1.1

11.1.1 Release Notes (13-03-2022)
New features and improvements:

• The FANTOM control surface script will now be automatically configured for FANTOM 06, 07, and 08 users.

I noticed i have a bit less RAM usage in a total empty project compared to 11.1.

 

Webpage crashed and its weekend so, i guess they will fix it on monday.

Nobody is keen working on weekends.

 

11.1.5b3 Release Notes (06-04-2022)
New features and improvements:

• The FANTOM control surface script will now be automatically configured for FANTOM 06, 07, and 08 users.
• Updated the software texts for the Collision instrument.
• Updated various software texts.

Bugfixes:

• Fixed a bug that caused note-off and pitch bend reset messages to be sent to all routed MIDI outputs when the device chain of any track changed.
• Fixed an issue for VST3 plug-in development that caused projectTimeSamples to sometimes be incorrect.
• Fixed a bug that caused loud audio spikes in Wavetable under rare circumstances.
• Fixed an issue where setting a play marker in the Arrangement View would disrupt MIDI Control Surface mapping to Live's Song Time parameter.
• Fixed an issue in the SL_MkIII control surface script that caused the knob widgets of the displays to move abruptly.
• Fixed an issue in the SL_MkIII control surface script that created unnecessary undo steps when adjusting volume with the sliders.
• Fixed the device selection behavior of several Control Surface Scripts (such as APC Mini and Launch Control XL) so that it no longer interferes when selecting chains within an unfolded Drum or Instrument Rack in Session View.
• Fixed an issue that caused Live to incorrectly show video clips on the uppermost track (instead of the bottommost track) in Live Sets with multiple overlapping video clips.
• When Jump is selected in the Clip Follow Actions Menu, the Jump Target slider box now includes a default value and proper text alignment.

 

native apple support is a very huge code rewriting party, they had a team of beta user testing. Thats not comparable to any small bugfixes, like the one where devices were not working.

VST scanner seems to be fixed now.

 

11.1.5b5 Release Notes (27-04-2022)
Bugfixes:

• Fixed a bug that caused incorrect freeze/flatten results for tracks containing the External Instrument device that received input from other tracks where automation influences their output.
• The encoder sensitivity for the KeyLab and KeyLab 88 Control Surface scripts has been reverted to its initial setting.

 

11.1.5b6 Release Notes (03-05-2022)
Bugfixes:

• Fixed an issue on macOS that caused Live to crash when clicking on the linked release notes in Live's Status Bar.

Very small beta update, maybe 11.1.5 is close?