As the title says, where could I find this "Snare" sample? with "RRs".
It sounds like a trashcan snare or something like this.

https://voca.ro/1hqwSSPXTbt6
.
.
.

If you know a complete drumkit including that kick, let me know too, please, but it is not important

 

It sounds like a drum kit recorded with a cheap mic. This video can help:
Jump to 0:40

 

Last edited: Sep 6, 2021

Doesn't sound like the snare, just "cheapy"

 

have you tried separating it with rx8?

 

I prefer a good quality sample with their RRs

 

Enigma's The Same Parents.... I've read that Enigma's 7th album made of many loops and sounds from Logic libraries or some kind of.... Look thru the drum loops or breaks.. I don't know really, I only saw this DAW once in 2013....

 

So you're looking to snare a particular snare sample eh?

 

Yes, you guessed it : ) I knew Mc worked with loops almost in all his albums but I heard that "can" snare sound somewhere else...

 

That snare of the mp3

 

It sounds like a pitched down drum kit. Try doing that.

 

It is pretty easy to recreate this sound

1- take a good open sounding acoustic snare sample (without the timbre) (ie. jazz snare drum sample)
2- pitch it down to taste (-3 /-7 semitones (not set in stone, depends on the original pitch))
3- cut the high frequencies with a filter or eq (lo-fi, vintage)
4- add a little saturation (to get more punch and/or sustain)

and that's it

 

Last edited: Sep 5, 2021

simply use a convolution "reverb" of a can/oilbarrel/steeldrum and add it to a snaresound like Wizzdome71 described.
here a link to free impulse responses from weird "spaces":
https://fokkie.home.xs4all.nl/IR.htm

 

Hi, What's that "timbre" ?

 

thanks for that page. So should I add it in form of "gated reverb" at the end?

 

Oh sorry timbre is the french word. The stiff wires held under tension against the lower skin.

 

Last edited: Sep 5, 2021

Well well guys I found on timbales and other metal perc the sound I was looking for. I will use your tweaking advices too. The quest ended : )

Pd. I really like enigma's samples (specially the percussion/drumkits) Finely selected and mixed

 

Last edited: Sep 6, 2021

1) Get an ordinary one-shot snare sample
2) Pitch it down around -10, -12 semitones
3) Cut high frequencies at and above 600-700 hz
4) Cut low frequencies at and below 150-200 hz
5) Apply a bit of reverb
6) Stretch it a bit, but a bit.

Feel free to alter these settings in order to get a similiar result.

 

727 from Mars has good timbales, since you mention kits.

 

https://voca.ro/1infNkxUuCXN
Cut, correct and use. Try editing with a drum replacer like "addictive trigger"

 

Good trick, but it is better to use original cd wav or flac for less lossy compression. I can help with rx for further fixes and quality enhancement. I like hours of editing and restoration)
Defhouse, did you use acon spleeter stuff or rx to separate drumbreak loop?