Elysion- Delete xml entry from Service Center. Register again with Add Library and check the xml file is there again. Some idiots (lots of) say there is a problem with SNPID. NO problem with SNPID. It´s Q14, no W36. After register, go to Service Center folder in MAC and delete the entry NativeAccess.xml. Restart Kontakt. Should appear like this:


Garritan Personal Orchestra- There are two versions about this. VSTI and Kontakt conversion. Only have to get the Kontakt version. You must search on torrent sites because it´s not on AZ. That´s all.

P.D. By the way. With last Kontakt 6.1.1 version, any other 6.x.x is unuseful.

 

Hello,
when you get the Elysion bank from the net, you often have a version with the SNPID of the nicnt file "000".
I don't think I'm completely stupid, and by replacing this triple zero by "W36", making it an Add Library, it works perfectly at home, and I can say that I installed a good package of libraries on my PC.
When I have a bank that doesn't set up or has no nicnt file, I get a file from an existing bank but I will never use it, and I simply replace the name:
Name and Regkey must be identical.

 

OK now there is some progress. Changing the SNPID to Q14 made the library stop giving that error. However, it does not create a new XLM file once I add it to library tab and also shows up with activate window and demo mode when loading its library. I know I've seen an XML for it before though, just not making it now for some reason. Also not showing up in Kontakt 5 only 6. 5 crashes once you add it to library. If I delete the XML for Native Access the Elysion library then disappears from Kontakt 6.
Garritan version I have is Kontakt version but still gives that same error message.
@celtic3342 Am I correct in assuming that each purchasable library has a specific SNPID code that is supposed to have assigned to it? If so is there a sheet or something that lists all libraries with their correct respective SNPIDs? And also am I correct in assuming that when making your own libraries for stuff like the wallpapers on here for libraries that weren't originally designed to be added to the libraries tab, that you can pick your own SNPID number, just as long as it is not the same exact 3 digit code as any pre-existing libraries you already have loaded?

 

Last edited: Nov 2, 2019

@Iris You're saying that you will consistently replace it with the same "W36" SNPID code for multiple libraries, or does it have to be a new 3 digit SNPID code for each new library? This is where I'm having the problem is I have a good amount of libraries I wish to set up and I don't want to power through creating all of these nicnt files only to find out that I have to do them all over again because I set them all up incorrectly. I noticed that when I started I copied my nicnt file from my Noir library and had changed the SNPID number on it and from then on Noir has been stuck in demo mode even though I legitimately own this library. I deleted the duplicate nicnt file but it has been stuck in demo mode ever since.

 

Last edited: Nov 2, 2019

Wait, am I supposed to be running a cracked version of kontakt for the demo modes to be bypassed on these libraries? Cause I am running a registered version.
That's kind of the conclusion I am drawing now. If so how do you get a cracked version to properly install?
I am met with the following error when trying to do so:
"Failure. Installation is not possible since the full version of Kontakt 5 is found on this computer.
The latest version of Kontakt 5 can load all Kontakt Player libraries. You can update your existing Kontakt 5 full installation by running the latest Kontakt 5 update installer!"
And I am def running a full version installer. I've tried deleting every possible file and trace of Kontakt 5 but am met with this error no matter what each time when running the cracked installer.
Also worth noting if I haven't already that I am on mac.
And as for Kontakt 6 I do not see any available version 6.1.1 available for mac but please correct me if I'm wrong or educate me on how to make it work without.
Thank you again guys.

 

Last edited: Nov 2, 2019

No, you should never use an identical SNPID number, that's why I use existing nicnt files from banks that I will never use to create other nicnt files, so the number is valid in Kontakt and will never be used for another future bank. You have to be careful with these numbers because you quickly created a conflict, or have a number that will never be valid.

here are some of the ones I created and so I will never use the same number again :

 

Hi, it all makes sense.
Of course you have to use a cracked version of Kontakt to use these banks. In your case you have an official version 5, so you would need to get a version 6, because it is the only one that can be installed at the same time as your official version. But for Mac the difficulty is that versions 6 do not allow to make an Add Library, you have to go through version 5 and then open version 6 to use them. Honestly, in your case, I don't know how it's going to work.
Good continuation.

Translated with www.DeepL.com/Translator

 

Kontakt questions:



Hey guys,

Thank you so much for your continued help and support here. So upon researching this for almost 24 hours straight I have come to learn the following:

Mac def seems to have a version 6 crack. It seems to work ok from what I've seen thus far so thank god no need to do the Vienna ensemble server idea from a PC as I was dreading that. But @celtic3342 I am curious as to why you recommend version 5.6.0 over 5.6.6?

I am curious if I can assemble the libraries on my mac, create NICNT files for any libraries that do not already have them and then link all libraries on my Mac, and then just go onto my PC and relink to those same libraries on my external drive to save time since I absolutely loath working on PCs.

I still am wondering if as far as the NICNT files go are there basically two types: NICNT files that originally came with the purchasable libraries that were meant to be added? And for those you are required to stick to those specific SNPID numbers within the NICNT files and XML files. And then second there are the libraries from this forum where they were never intended to be added to the library tab and therefore it literally does not matter what 3 digit code you choose for the NICNT file and XML file, just as long as it is not one that is already taken from another Native Instruments product?

And again, is there a comprehensive list of the current Native Instruments and 3rd party library SNPID codes that have already been used and should be avoided as duplicate SNPIDs? Cause wouldn’t that be helpful in assembling the ultimate Kontakt library if there is one?! Like @Iris do you have the NICNT SNPID list for that list you’ve posted? Would be amazing if so.

Also, are the NICNT files properties specific to the original file itself, or from the SNPID number within them? Reason I ask is that I copied one of my NICNT files to another 3rd party library in hopes of just using it as a quick starting template to then just change the SNPID and product name and I noticed it then changed my original library from being a Native Instrument purchased library to going into demo mode. I tried deleting the duplicate NICNT file but the original libary still stayed in demo mode. How do I clear this out and get my original file back into it's non-demo mode? And when creating these NICNT files for the libraries that were never meant to be added to the libraries tab and that we've collected wallpapers for here, I can just use a standard NICNT template over and over as long as I change all the respective library names in it as well as the SNPID number correct? I purchased the Kontakted app to help expedite this.

And final point, I understand there are apps on PC to help you see your current comprehensive list of SNPID codes already used, but on Mac am I correct in assuming that the only way to do this is with the terminal command that displays all SNPID codes used on your system?

Thanks in advance guys. I hope my questions aren’t too distracting to this forum but I feel they are going to help a lot of us in building our desired libraries without any hurdles or frustration.

 

Last edited: Nov 2, 2019

@Iris
I don´t know if you are absolutely stupid. Not my concern. If you get a library from the net (from where?), open nicnt file and SNPID is 000, the stupid one is who uploaded that library without checking nicnt. Maybe this is the reason because I don´t download from AZ. Uploaders only get library and imediately upload to the site. Money is money. The Elysion version I downloaded from torrent site thanks to @josenacha had SNPID Q14 and OK. If you added W36 as SNPID is because that W36 is still free. One example, as if you get 52H is free too. Of course if you replace 000 by any other free library will work. 000 is an empty value, can´t be added to a new nicnt file.

Perfect if you installed a good package of libraries. I installed almost 5.000 and I´m not better than you. Tell me when you be able to install Voxos, Voxos 2 or 3 Morphestra one by one.

Name and Regkey must be the same. Thanks for the information. I learn something new today.

P.D. A very good reply from somebody who asked lots of wallpapers from libraries not available for the rest of people.

 

Hi,
I'm not a specialist, but I know that there are versions 6 cracked for Mac, especially on audionews :
Native.Instruments.Kontakt.6.v6.v6.1.1.1.Standalone.AU.VST.MacOSX

The history of SNPID numbers is valid for ALL libraries that have a nicnt file, when knowing which numbers are already used, it may be very difficult given the number of existing libraries. This is why I have recovered as many of these nicnt files as possible to start with existing numbers and not likely to create conflicts with others existing or to come.

I don't know anything about Mac, and I know that there are much less possibilities today with cracked software, on PC for example there are "portable" versions of Kontakt, and I especially know that it is not yet possible to add a library directly by version 6 on Mac, whereas it is quite possible on PC.
I hope for your own sake that someone here will have the answers you're looking for on Mac.
Good continuation.

 

Hello,
I don't understand the aggressiveness of your message?
yes, I, like you, asked for some wallpapers on this site, and I got a package requested by the others, what's the problem?
Yes no problem to put any bank as long as I use for this bank a valid SNPID number that I get from nicnt files of banks that I will never use. I am not competing with the one who has installed the most banks, and I don't see any point in having more libraries than I can use, I just wanted to say that I am using a method that has proven its worth for years, without conflict.
I don't think I launched any attack, just replied to your assertion that some people were stupid enough to put the W36 number in this Elysion nicnt file, and you only have an idea if the number put by Josenacha is the original number? I don't know, I just know it works very well.
I just wanted to help with the little experience of an Uploader on a French site for years. But I absolutely don't want an Ego war with you.
Have a good day

 

Last edited: Nov 2, 2019

@mikeg123

There is a cracked Kontakt 6.1.1 for OSX on AZ and in torrent sites. You know.
People seem to be obssesed by apparently demo versions. I have some of them and still working months or years later.

There are two kinds of nicnt files: the "powered by Native Instruments" and the personal ones. First ones are paid by third party companies and second ones you make them by yourself with a template, for instance, and you add later what you need to be recognized by Kontakt.

If xml file was not created when Add Library, try with this copying on Service Center folder: http://depositfiles.com/files/wu5nbjxw5

There are much more libraries without nicnt file than present ones. If I have 122 libraries from 8Dio I really doubt any of them have a nicnt file powered by NI and with Big Fish Audio, other 188, a similar case but they yes have some original nicnt files. Other question is if you want to load directly the patch from Kontakt menu or want to create the file for adding to the tab and load from there. On my personal Excel file with all SNPID saved there are 4460 entries and 90% were nicnt files created by myself. And old NKX files previous to Kontakt 5, of course. You simply decide if want to load patches individually or add the library with the wallpaper to the tab and load from library menu.

There are some of these lists you mention over there with SNPID, but not an updated one or I have not information about. It´s not the same having 200 libraries than 4.800.

Before last versions of Kontakt you only could use combinations 1-9 and a-f. Nowadays you can use any combination with any letter. For instance, if you get H letter, you can register from H00 to H99. Library will be added as 000. You only change 000 value in xml and library will appear on tab when open Kontakt. A little hint about this: take care with libraries with three numbers (234, 875). Use to be the selected ones for powered by NI libraries and also look out with Maschine. If install Maschine 2 will create a xml entry with all numeral SNPID. But you only have to delete Maschine 2.xml from Service Center and all those numeral SNPID will be available again. The same case than NativeAccess.xml.

SNPID are part of the NICNT. You can´t use a original nicnt for other library. There are templates for this where you can specify the details you need for adding a different library. This is not exactly in that way. NICNT files can be unlocked, but the people who know how to do this don´t share the information... About the duplicated library, delete both entries on Service Center, delete library, download again and add to tab again.

I didn´t used this kontakted app and will never use. Don´t need to do it.

Probably nobody developed a tool like KLM 3 for MAC. Can´t help on this. Only create a personal list for that.

 

Last edited: Nov 2, 2019

It´s not agressiveness. Simply it´s me.
I never asked for a wallpaper not available for download. Oh, sorry, only one. Mega Super Synth. But I don´t think a 360 GB library bundle will be interesting for people and bundles are prohibited on AZ.
You see your points and I see mines.
Maybe you replied to the stupid detail because you thought I talked about you. Really ridiculous. Yes I have the idea about SNPID about josenacha because I looked by myself which one was the original SNPID. Did you do it?
Fantastic if you want to help. And of course, an ego war with me is absolutelly unuseful. I´d win always. In ego, and in knowledge.
We all have a great look with the master @NYCGRIFF and your wallpaper requests about libraries not available. I simply wouldn´t do those wallpapers. But he is much better person than me. Enjoy your look.

French and spanish ones historically never were friends. That´s one more reason about why.

End of the game.

 

I have many Spanish friends and I am sure they will find your words very interesting, we know why there are so many wars these days, thanks to ideologies like yours. That you win in an ego war doesn't surprise me, but especially doesn't interest me. And yes, I asked about Elysion's moose number.......... And I've never asked for a wallpaper from a library that's not available, your comment is completely off topic.
Now it's the end of the game, have fun.

 

@celtic3342 Thank you so much for taking the time to lay out such great detail for me on all of these questions. Means a lot. So I have one final question, is there any way you could send me the Excel file with all of the SNPIDs listed? I already have all of the libraries, the Excel file would just save me a tremendous amount of time while having to make the NICNT files myself for each library that doesn't come with the powered by Native Instruments NICNT file, and as you said, about 90% of the actual libraries, and make the whole process of making almost 5,000 NICNT files a lot less painful.

 

Last edited: Nov 2, 2019

Hi @mikeg123
Re. help with making a list of your SNPID #'s on a Mac: Get Sublime Text app. Choose the correct 'Find' options in the dropdown. Cmd A/grab all .xml files from Service Centre folder and drop them into it. Copy and paste the result to a text file, and you're done.

Also, sometimes, when adding a library (via Kontakt 5.6.0, obvs) an .xml with an SNPID # of 000 is created.
This is when you have to edit the .xml simply with TextEdit, and put in the same as found in the .nicnt file, and then save/Cmd S.
Then the library will show up in Kontakt 6.

Wish I'd seen all this earlier. Could have had you sorted in 5 minutes.

And yes, we have to specifically use 5.6.0 to add libraries now, so they show up in 6. Not any other 5.6.x version.
It's just how it is.
Any other questions, happy for you to pm me.

 

I don't understand. I have Voxos & Voxos 2 installed.

 

Hey @Smoove Grooves thanks so much. Go ahead and shoot me a pm.

 

So you have this?