http://www.replikasound.co.uk/rsgl03_free_bass_gtr.html

RSGL03 v7 FREE Bass Guitar
VIRTUAL BASS GUITAR FOR KONTAKT 5.3+





DOWNLOAD FREE


£0.00

VIEW CART

• FREE Note Range Limited Demo Version of RSGL03 v7
• Adaptive Legato and Hybrid Legato Scripting
• 11 Key-Switched Articulations
• Note Range : D0 to G3 [ This Demo D0-E1 ]
• Random Robin Note Alternation and Note Borrowing
• Easy-Play Chord Mode with Strum Speed, Direction and Note Emphasis
• 26 Bar Chord Types and Power Chords
• 2 Pages of Effects Units including 24 Reverb Types
• Tremolando Picking Function and Vibrato Controls
• Fully Customisable External MIDI Control
• Dynamic Brightness Filters and Volume Envelopes
• Full Retail Version of Kontakt 5.3+ Required

 

https://www.plugin-alliance.com/en/products/schoeps_double_ms.html

Schoeps Double MS
Decode Double-MS Microphone Setups in Post Production



OVERVIEW

This plugin is calibrated for the SCHOEPS Double M/S Microphone, but it will also work with any other Double M/S Mic Setup. It will provide optimal results only on tracks that have been recorded with a 3-microphone (Double M/S) setup.

The SCHOEPS "Double MS Tool" plugin decodes the three signals of the Double MS system. It creates a 5.0 Surround signal on the basis of three microphone signals.

The plugin enables customized, intuitive decoding on a realtime WYSIWYG basis.

With the plugin the spatial and timbral fidelity of the resulting 5.0 Surround signal can be optimally achieved.

FEATURES

• Easy decoding of the Double MS microphone signals to Stereo or Surround
• Intuitive, realtime WYSIWYG control of the virtual microphone parameters including polar pattern, offset angle, rotation and gain
• Realtime display of the virtual microphone patterns in a coloured polar plot window
• Increase or decrease the gain of the diffuse sound which is extracted from the signals by an a adaptive algorithm
• Enhance spatial impression by increasing the amount of decorrelation of the extracted diffuse sound Improve the front/back localization by a high cut filter and a delay on the rear outputs

 

https://www.tb-software.com/TBProAudio/accessiblemeter.html



Accessible Meters
The following plugins are provided as they are. All plugins free and base on the work of Queen Mary University of London. TBProAudio extended this work and recompiled them to function in more DAWs.

AccessiblePeakMeter


AccessiblePeakMeter is an audio plug-in that makes peak level meters accessible to visually impaired people.

It uses real-time sonification to deliver information to the user about audio levels and peaks in audio signals, and so supports core activities in audio production.

AccessiblePeakMeter was developed in 2014/2015 at Queen Mary University of London as part of the Design Patterns for Inclusive Collaboration research project ( http://depic.eecs.qmul.ac.uk ).

More information about the plug-in can be found at http://depic.eecs.qmul.ac.uk/apm

USAGE
The plug-in comes with the following tweakable parameters:

1. Sonification Type: to switch between continuous mode mode and clipping mode mode;
2. Dry: controls the level of the input audio, namely the audio content you want to analyze;
3. Wet: controls the level of the sonification;
4. Threshold: sets the threshold for the clipping mode, it has no effect on the continous mode
5. Decay: this only affects the continuous mode sonification. The value ranges from 1 second down to 0.05 seconds. This is the time the meter would take to decay from 0 db to -inf after an impulse. These numbers don't give a real feeling of how the sonification will sound - it is easier to think that when set to 0.05 the sonification will stop pretty immediately when you stop the audio; whereas if the value is set to 1, it will take longer to decay. In general, though, the latter sounds cleaner and normally the audio level doesn't go all the way down to silence, as during the decay it encounters other peaks that bring it back up. So it's up to you to find the right trade off.
6. Sonification Channel: streams the sonification either to channel 1+2 (mix with original signal) or to channel 3+4 (have it separated from original signal)

The AccessiblePeakMeter provides access to the parameters by exposing them to inspectors - such as ReaAccess plug-in or the Cakewalk Sonar inspector - in a clear and well formatted way.
Please download AccessiblePeakMeter here.

AccessiblePeakMeter2


AccessiblePeakMeter2 is an development of AccessiblePeakMeter. It adds more meter modes (RMS, EBU, VU).

It uses real-time sonification to deliver information to the user about audio levels and peaks in audio signals, and so supports core activities in audio production.

AccessiblePeakMeter was developed in 2014/2015 at Queen Mary University of London as part of the Design Patterns for Inclusive Collaboration research project ( http://depic.eecs.qmul.ac.uk ).

More information about AccessiblePeakMeter can be found at http://depic.eecs.qmul.ac.uk/apm

USAGE
The plug-in comes with the following tweakable parameters:

1. Sonification Type: to switch between continuous mode mode and clipping mode mode;
2. Dry: controls the level of the input audio, namely the audio content you want to analyze;
3. Wet: controls the level of the sonification;
4. Threshold: sets the threshold for the clipping mode, it has no effect on the continous mode
5. Decay: this only affects the continuous mode sonification. The value ranges from 1 second down to 0.05 seconds. This is the time the meter would take to decay from 0 db to -inf after an impulse. These numbers don't give a real feeling of how the sonification will sound - it is easier to think that when set to 0.05 the sonification will stop pretty immediately when you stop the audio; whereas if the value is set to 1, it will take longer to decay. In general, though, the latter sounds cleaner and normally the audio level doesn't go all the way down to silence, as during the decay it encounters other peaks that bring it back up. So it's up to you to find the right trade off.
6. Meter Mode: sets the different meter modes. Please to note that all meter modes are calibrated to 0 dBFS, 0 LUFS, 0 VUFS and 0 PPMFS
   1. Peak: same as AccessiblePeakMeter, dBFS
   2. RMS: 600ms integration time, dBFS
   3. RMS+3dB: 600ms integration time, plus 3dB, dBFS
   4. EBU ML -23: EBU R128 Momentary Loudness, target level -23 LUFS, LUFS
   5. EBU SL -23: EBU R128 Short Term Loudness, target level -23 LUFS, LUFS
   6. VU -18: peak meter, 300ms integration time, target -18 dBFS, VUFS
   7. PPM – 18: peak meter, target -18 dBFS, PPMFS

The AccessiblePeakMeter2 provides access to the parameters by exposing them to inspectors - such as ReaAccess plug-in or the Cakewalk Sonar inspector - in a clear and well formatted way.
Please download AccessiblePeakMeter2 here.

AccessiblePhaseMeter


AccessiblePhaseMeter is an development of AccessiblePeakMeter.

It uses real-time sonification to deliver information to the user about phase correlation of stereo audio signals, and so supports core activities in audio production.

AccessiblePeakMeter was developed in 2014/2015 at Queen Mary University of London as part of the Design Patterns for Inclusive Collaboration research project ( http://depic.eecs.qmul.ac.uk ).

More information about AccessiblePeakMeter can be found at http://depic.eecs.qmul.ac.uk/apm

USAGE
The phase correlation of the stereo signal is measured as value from -1 (out of phase) to +1 (in phase). Well mixed audio productions go from +1 to 0 (mono). A good warning or threshold value is +0.5.


The plug-in comes with the following tweakable parameters:

1. Sonification Type: to switch between continuous mode mode and clipping mode mode;
2. Dry: controls the level of the input audio, namely the audio content you want to analyze;
3. Wet: controls the level of the sonification;
4. Threshold: sets the threshold for the clipping mode, it has no effect on the continuous mode
5. Decay: this only affects the continuous mode sonification. The value ranges from 1 second down to 0.05 seconds. This is the time the meter would take to decay from 0 db to -inf after an impulse. These numbers don't give a real feeling of how the sonification will sound - it is easier to think that when set to 0.05 the sonification will stop pretty immediately when you stop the audio; whereas if the value is set to 1, it will take longer to decay. In general, though, the latter sounds cleaner and normally the audio level doesn't go all the way down to silence, as during the decay it encounters other peaks that bring it back up. So it's up to you to find the right trade off.

The AccessiblePhaseMeter provides access to the parameters by exposing them to inspectors - such as ReaAccess plug-in or the Cakewalk Sonar inspector - in a clear and well formatted way.
Please download AccessiblePhaseMeter here.

AccessibleSpectrumAnalyser


AccessibleSpectrumAnalyser is a real time spectrum analysis plug-in that allows visual impaired users to inspect spectrograms using the same sonification as the accessible peak meter. Instead of monitoring the amplitude of the audio signal though, you will be monitoring the frequency components of the signal within a customizable selection of frequencies.

The plug-in uses the "clipping" sonification of the AccessiblePeakMeter. That is, you can set a threshold in dB and, as soon as the energy of any frequency in the selection goes past the threshold, you will hear a short beep. Like in the AccessiblePeakMeter, the beep starts at 440 Hz and it's raised one semitone for each dB of difference between the frequency magnitude and the threshold. In case more than one frequency within the selection is higher than the threshold, then the highest one is taken into account for the sonification purpose.

There is only one single spectrum for both left and right channels: the two channels are mixed together before being analysed. In AccessiblePeakMeter, there is a separate sonification for peaks in the left and the right audio channel. In the AccessibleSpectrumanalyser instead, one single sonification is panned from left to right and the panning represents the position of the peaking frequency in the whole spectrum, ranging from 20 Hz on the very left, to 20050 Hz on the very right. For example, if the selected spectrum peaks at 50 Hz then you'll hear the beep towards the left, whereas if the peak is at 20 kHz the beep will occur towards the right.

http://depic.eecs.qmul.ac.uk/apm/spectrum.html

USAGE
The plug-in comes with five tweak able parameters:

1. Threshold: sets the threshold in dB for the clipping sonification. If any frequency within the selection is higher than the threshold, then the plug-in will emit a beep;
2. Selection Start: sets the starting point, in Hertz, of the selection. Frequencies within the selection will be monitored for peaks;
3. Selection Size: sets the size of the selection, from the starting point. For example, if the selection starts at 1000 Hz and the selection size is 500 hz then all the frequencies between 1000 and 1500 Hz will be monitored for peaks;
4. Dry: controls the level of the input audio, namely the audio content you want to analyze;
5. Wet: controls the level of the sonification;

The AccessibleSpectrumAnalyser provides access to the parameters by exposing them to inspectors - such as ReaAccess plug-in or the Cakewalk Sonar inspector - in a clear and well formatted way.

Please download AccessibleSpectrumAnalyser here.

System Requirements

• Windows XP SP3 or newer
• Mac OS X 10.5 or newer
• Win: 32/64 Bit VST, 32/64 Bit VST3, 32 Bit RTAS, 32/64 Bit AAX
• OS X: 32/64 Bit VST, 32/64 Bit VST3, 32/64 Bit AU, 32 Bit RTAS, 32/64 Bit AAX
• Tested with: Cockos Reaper, Steinberg Cubase/Nuendo/Wavelab 6/7/8/9, FL Studio 12.x, PT10/12/2018, Reason 9.5

 

https://www.edinburghrecords.com/product-category/free-downloads/





QUICK VIEW
SOUND EFFECTS

Sounds Of Scotland

£0.00
FREE



QUICK VIEW
FREE DOWNLOADS

Weekend Boom Bap Pack Vol 1

£0.00
New



QUICK VIEW
SOUND EFFECTS

Cinematic Impact Sound Effects

£0.00




QUICK VIEW
SOUND EFFECTS

Ambience Sound Effects

£0.00
FREE



QUICK VIEW
FREE DOWNLOADS

PhatNoise – Delay

£0.00
FREE



QUICK VIEW
DRUM SAMPLES

Boom Bap Pack

£0.00




QUICK VIEW
FREE DOWNLOADS

Various Vinyl Samples Vol 2

£0.00
FREE



QUICK VIEW
FREE DOWNLOADS

PhatNoise – Flanger

£0.00
FREE



QUICK VIEW
SOUND EFFECTS

Random Sound Effects

£0.00
FREE



QUICK VIEW
FREE DOWNLOADS

Phazer

£0.00




QUICK VIEW
FREE DOWNLOADS

Drums R Us Vol 4

£0.00
FREE



QUICK VIEW
FREE DOWNLOADS

LoFi Bass Filter

£0.00

and more...

 

http://adammonroemusic.com/free-delay-vst/delay-vst-free.html
https://www.kvraudio.com/news/adam-monroe-music-releases-adam-monroes-delay-free-43188


Adam Monroe Music releases Adam Monroe's Delay (Free)
14th November 2018



Adam Monroe Music has released Adam Monroe's Delay, a free delay VST AU and AAX plugin for Windows and OS X DAWS. Adam Monroe' Delay includes 25 presets and simulates delays from the simple slapback to the bubbly and experimental.

Features:

• Traditional Time, Feedback, and Mix knobs.
• High and Low-Pass filtering that can be set to filter linearly or exponentially.
• "Ping-Pong" panning that is synced to the delay time, with adjustable width.

Adam Monroe's Delay is a stereo plugin that supports 44.1 - 192 kHz sample rates.

Read more at adammonroemusic.com

 

https://www.waves.com/lpn/black-friday-2018/free-plugin-signup


This Black Friday we're releasing
A BRAND NEW PLUGIN:
Sign up now to get it FREE!

 

This is certainly great, but how can I get a track ready to get out of it all ?! I think the answer here is simple and I can even personally Mixing audio thanks to the sevenskiesmusic. If you already enter the world of music, then only the pros, and if you have such an assistant, then it will turn out much faster, safer and that’s a fact.

 

https://github.com/passivist/GRNLR

GRNLR
GRNLR is an open source granular synthesis VST/AU instrument for Mac and Windows with a focus on flexibility and ease of use. It offers a approach to granular synthesis that allows for a great number of simultaneous playing grains as well as supporting extremely short and long grains. The instrument comes with a tutorial documenting every stage of the development process. The tutorial is intended as a resource for people wanting to learn how to write their own instruments using the JUCE Framework.

Here is a playlist of 7 short pieces I wrote using the plugin.



Download:
Download ZIP

 

https://github.com/raranyo/ChannelStripAnalyser
https://www.raimonaranyo.com

Channel Strip Analyser VST plugin for mac only



CHANNEL STRIP ANALYSER

Channel Strip Analyser is an audio VST plugin developed for macOS using JUCE framework with C++.

The plugin shows the user how a certain chain of audio processors are affecting the signalusing different visualisations. Spectral, time and stereo information is shown in a way that helps the user to understand how certain plugins change the original signal making easier for them to configure the parameters of the processor.

The plugin is in the final phase of development and will be ready for the users soon...
For more information about the software, it's characteristics or if you are interested in trying it out, please contact me via the embedded web form.

You can also check the code in my GitHub repository

 

http://freemusicproduction.net/synthw.html

Freemusicproduction.net releases Synth W - Free wavetable synth for HALion Sonic SE

Freemusicproduction.net recently released Synth W, a free wavetable synth for HALion Sonic SE (free instrument player).

Includes:

• Oscillator 1, Oscillator 2.
• Sub Oscillator.
• Noise.
• Voice (Unison-Glide-Pitch).
• Envelope (A, D, S, R).
• Filter - CutOff.
• LFO - Modulation.
• Step Modulator - Modulation.
• Flexphraser (Arpeggiator).

Price: Free.

 

Wonder how to do an offline install?

 

doesn't work offline. You have to install SpitfireAudio Plugin-Manager and let it do the download and installation, so, no way..

 

http://www.ghosthack.de/adventcalendar/

GHOSTHACK ADVENT CALENDAR FOR PRODUCERS 2018
New freebies, offers, actions and tutorials every day until the 24th December!

 

http://www.nsp-vst.ru

win only

Overdrive Rack Pro

​

Overdrive effect

• OVERVIEW
• FEATURES
• REQUIREMENTS

Overdrive Rack Pro is an audio plugin for Microsoft Windows, overdrive effect. Plugin is easy to use and gives you a large variety of tones – from warm overdrive to cold, from soft overdrive to hard distortion. You can set such overdrive parameters, as signal trim level, curve form, overdrive highpass/lowpass and main frequencies. Overdriven signal passes through EQ block, which allows you to control tone more precisely. Plugin allows to use oversampling up to 16x mode. Also it allows to control input/output level at VU's.





Price: 24.92$ Free

E-mail/Serial: You/1F35FF6EFED98BED

Last version: 1.2

Downloads:

Support freeware development

Over Diver od82o

​

Overdrive effect

• OVERVIEW
• FEATURES
• REQUIREMENTS

Over Diver od82o is a free audio plugin for Microsoft Windows, famous overdrive stomp emulation.


Price: Free

Last version: 0.7

Downloads:

Support freeware development

Blackbooster

​

Booster multi-purpose effect

• OVERVIEW
• FEATURES
• REQUIREMENTS

BlackBooster is a free audio plugin for Microsoft Windows, booster stomp emulation, based on real scheme. BlackBooster is a multi-purpose effect and can be used not only for guitar.


Price: Free

Last version: 0.2

Downloads:

Support freeware development

Wahman

​

Wah-wah effect

• OVERVIEW
• FEATURES
• REQUIREMENTS

Wahman is a free audio plugin for Microsoft Windows, wah-wah stomp emulation, based on real scheme.


Price: Free

Last version: 0.5

Downloads:

Support freeware development

 

https://www.wilkinsonaudio.com/product/zombass-4/?v=3a52f3c22ed6

SALE!

ZomBass 4

$25.00 $0.00

 

which one do you consider the biggest, coolest, useful at all, best FREE software/plugin/library of 2018?

 

SSD free drums. https://stevenslatedrums.com/ssd5/

Better than Ezdrummer, Sup Drummer 3... whatever. I love SSD 5 free drums. KD with Couture Auburn Sounds (free) transient designer and SLAX (free) comp/limiter sits so great on the mix, never hidden by other tracks. Superlative in my book. And everyone uses drums. So for me is the most useful.

 

for me this is one of the winners:




OZONE IMAGER FREE from iZotope

i have given space, width, room character, etc. to lot of dead tracks

 

For me a no brainer and my lastest postest here. Ciao, Brother.



https://www.tokyodawn.net/tdr-nova/

 

are you quitting audiosex?